Well Water Nerd

Well water in Bradford County, Pennsylvania

1in18

Testing recommended

tested well samples in Bradford County exceeded the EPA limit for arsenic (10 ug/L), based on public data from USGS Water Quality Portal.

The strongest signal is total coliform: 48% of 235 local wells tested were above the EPA limit, too few samples to carry the headline but first on the test list below.

235 private wells tested 2007 to 2025 in state summaries; 2,445 test results across 15 contaminants from at least 211 wells, 1935 to 2026; nitrate has the most at 270. Data refreshed September 16, 2026.

Compiled by Nick at Well Water Nerd from public records. How these pages are built

These are samples homeowners paid to send to the Penn State lab, often because of a suspected problem, so shares above the limit run higher than a random survey would find.

An estimated 39,231 people in Bradford County get their drinking water from a private well, per USGS 2015 county water use. That is about 64% of residents.

Separately, the USGS national arsenic model estimates that 7% of the 39,231 people on private wells in Bradford County draw water above 10 ug/L (the model's range is 5% to 11%), from geology and well depth rather than local tests.

What homeowner tests found

Penn State Agricultural Analytical Services Lab drinking water summaries: private wells tested and reported to the state, 2007 to 2025. Shares are against the level the state applies to each contaminant, named in the last column; several are stricter than EPA.

ContaminantAbove state levelWells testedMedian95th pctHighestState level
Total coliform2354610 MPN/100mL
Manganese93102,41050 ug/L
Iron601004,200300 ug/L
E. coli2352010 MPN/100mL
Lead
(first draw)
6710515 ug/L
Arsenic6914110 ug/L
Chloride834.42051250 mg/L
Nitrate
+ nitrite as N
860.2610 mg/L
Copper660.010.431.3 mg/L
Sodium108.4352.1

What individual samples found

Each row summarizes every public sample for that contaminant inside Bradford County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.

ContaminantAbove limitSamplesDetectedMedianHighestLimit
Arsenic
1975 to 2026
24661%0.4617810 ug/L
EPA limit
E. coli
1998 to 2022
829%090 MPN/100mL
EPA limit
Nitrate
1935 to 2026
27069%0.1053110 mg/L
EPA limit
Lead
1975 to 2026
21659%050015 ug/L
EPA limit
Fluoride
1970 to 2026
25182%0.10.94 mg/L
EPA limit
Copper
1975 to 2026
13069%0.0020.0821.3 mg/L
EPA limit
Uranium
2014 to 2025
11284%0.3411.830 ug/L
EPA limit
Radium (226 + 228)
2016
2080%0.642.15 pCi/L
EPA limit
Iron
1935 to 2026
no limit26480%99.556,400300 ug/L
nuisance level
Chloride
1935 to 2026
no limit259100%9.965,050250 mg/L
nuisance level
Sodium
1935 to 2026
no limit259100%18.12,51020 mg/L
health guideline
Manganese
1975 to 2026
no limit25283%307,370300 ug/L
health guideline
Radon
2014 to 2022
no limit80100%6358,5002,000 pCi/L
health guideline

Sampled fewer than 10 times, too few to summarize: PFOS (2), PFOA (2).

Over time

Share of samples above the limit by period. A cell needs ten samples to show; a comparison needs twenty in each period. Later periods sample fewer wells, and often the ones already known to have a problem.

Contaminantbefore 20002000s2010s2020s
Nitrate3%132 samplesn/a4%103 samples0%28 samples
Arsenic10%82 samples12%33 samples2%103 samples0%28 samples
Fluoride0%117 samplesn/a0%99 samples0%28 samples
Lead3%87 samplesn/a0%101 samples0%28 samples
Coppern/an/a0%101 samples0%28 samples
Uraniumn/an/a0%101 samples0%11 samples

Nitrate, arsenic, fluoride, lead, copper have held within a few points between the two most recent periods with enough samples.

Closer than the county

See the sampled wells near your address

The same records, drawn around one point: which wells within a few miles were sampled and what they found, how deep the wells next to you were drilled, and any leaking tank or cleanup site within a mile.

Check my address

What this means

Among homeowners in Bradford County who sent a sample to the state lab, the health-based limits most often exceeded were total coliform (48% of 235 wells), E. coli (11% of 235 wells), and lead (9% of 67 wells). These are ordinary wells tested by their owners, so the shares are the best available picture of a typical well here, with one caveat: people test more often when they suspect a problem.

Manganese and iron exceed the state's advisory level in a sizable share of wells; these are mostly a taste, staining or diet issue rather than a toxicity one.

What to test for in Bradford County

  1. 1
    Total coliform
    48% of 235 local wells tested were above the EPA limit.
  2. 2
    E. coli
    11% of 235 local wells tested were above the EPA limit.
  3. 3
    Lead
    9% of 67 local wells tested were above the EPA limit.
  4. 4
    Arsenic
    9% of 69 local wells tested were above the EPA limit.
  5. 5
    Nitrate
    3% of 270 local samples were above the limit.
  6. 6
    Radon
    Median local reading is 635 pCi/L.
  7. 7
    Manganese
    29% of 93 local wells tested were above the EPA secondary standard.
  8. 8
    Iron
    15% of 60 local wells tested were above the EPA secondary standard.

Test your Bradford County well for total coliform, E. coli and lead

Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.

Order the Tap Score well water test kit, from $209Already tested? Upload the report

Just want bacteria checked first? Tap Score coliform and E. coli test, $99. Coliform and E. coli are the tests every well needs every year.

Want a quick look before paying for a lab? Home well water test strips on Amazon check hardness, iron, pH and nitrate in minutes. They are a screen, not a result: arsenic, bacteria, uranium and PFAS need a certified lab.

Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says. As an Amazon Associate we earn from qualifying purchases.

Where to get a well tested in Pennsylvania: certified labs, state programs and prices.

Already have results back? Get your lab report read against the Bradford County numbers, $29. Every line explained, ranked by what matters, with the fix for each.

Wells in Bradford County

4,469 domestic wells in Bradford County are on record with the state. 98% are drilled into bedrock, and the typical well is 141 feet deep (one in ten goes past 300 feet).

In a typical Bradford County well, bedrock starts about 38 feet down, the median yield is 10 gallons per minute, 7% of wells yield under 3 gallons per minute and usually need a storage tank.

Bedrock wells are where arsenic, uranium and radon come from: the water sits in fractures in granite and metamorphic rock and picks up whatever the rock carries. That is why testing for those three matters more here than in a dug or gravel well.

Find your own well's report

The state keeps the driller's report for most wells drilled since 1984. It tells you how deep your well is, where bedrock starts, and how much water it makes, which decides what treatment can work.

  1. Open PaGWIS (Pennsylvania Geological Survey) and choose Water Well.
  2. The record lists depth, depth to bedrock, yield and use; drillers have reported new wells to the state since 1966.

Pennsylvania has no private well construction standard and does not require testing, so many older wells have no record at all.

The rock under Bradford County

Not a principal aquifer

The USGS map places this area outside any principal aquifer, which usually means wells here draw from fractured bedrock or thin local deposits rather than a large regional aquifer. Bedrock wells of that kind are where arsenic, radon and uranium turn up, and yields vary from well to well.

Classification from the USGS Principal Aquifers of the United States (national map, 2003 edition, GIS release 2015), read at the county centroid. A single well can sit in a different unit, especially near a boundary.

Official help in Pennsylvania

Two places to start that are not selling anything: the state program that answers private well questions, and its list of labs certified to run drinking water tests. A certified lab is the difference between a result you can act on and a number.

Treatment that fits the local profile

Total coliform

Inspect and repair the well cap and casing, then shock chlorinate and retest; UV disinfection whole-house; Chlorination system

E. coli

Shock chlorination and fix the well cap or casing; UV disinfection whole-house; Chlorination system

Lead

Point-of-use reverse osmosis; Certified lead-removal carbon filter; Neutralizing filter to raise pH and stop leaching

Arsenic

Point-of-use reverse osmosis; Adsorptive media (iron-based) whole-house; Anion exchange

Manganese

Oxidizing filter (greensand, birm) whole-house; Water softener (low levels); Point-of-use reverse osmosis

Nitrate

Point-of-use reverse osmosis; Anion exchange; Distillation

Systems we would look at first

Some links below are affiliate links. If you buy through one, the merchant pays us a commission at no extra cost to you. It does not change which products we list or what the data says.

For total coliform

Aquasana Rhino Well Water with UV

whole-house, at the point of entry, about $2,871

Whole-house system built for wells: sediment pre-filter, KDF and carbon, and a UV lamp rated to kill 99.99% of bacteria and viruses. It does not remove arsenic, nitrate, uranium or radon.

For E. coli

UV disinfection system

whole-house, at the point of entry, about $900

Fix the well cap and casing first; UV keeps bacteria from returning.

For lead

Under-sink reverse osmosis system

under-sink or countertop, about $300

Look for NSF/ANSI 58 certification listing the contaminant you need removed.

For lead

Acid neutralizing filter

whole-house, at the point of entry, about $1,200

Raises pH so plumbing stops leaching lead and copper.

For lead

Aquasana SmartFlow reverse osmosis

under-sink or countertop, about $225

Certified to NSF/ANSI 58 and 53 to reduce arsenic (96%, pentavalent), fluoride (90%), lead (99%), nitrate, nitrite and PFOA/PFOS at the kitchen tap, with a remineralizer.

For arsenic

Whole-house arsenic and uranium filter

whole-house, at the point of entry, about $2,500

Adsorptive iron-based media; sized to your well yield.

Free, no obligation

Get on the list for a free in-home water test in Bradford County

No water treatment company serves Bradford County through Well Water Nerd yet. We are signing licensed companies on county by county: they test at your tap for free, walk you through the numbers, and quote treatment only if something needs fixing. Leave your details and you are first in line. Nothing is shared until a company joins for Bradford County, and you get an email naming it first.

What are you worried about?

The test is free and there is no obligation. No company is named yet; your details stay with us until one joins for your area, and we log the time and address of this request.

Common questions

How deep are wells in Bradford County?

The typical domestic well in Bradford County is 141 feet deep, based on 4,469 wells reported to the state. One in ten is deeper than 300 feet. 98% are drilled into bedrock.

Is there arsenic in well water in Bradford County?

Arsenic was detected in 61% of 246 public well samples in Bradford County, and 6% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.

How high is radon in well water in Bradford County?

The median radon level across 80 public samples in Bradford County was 635 pCi/L, with a high of 8,500 pCi/L. New Hampshire recommends treatment above 2,000 pCi/L.

How often should I test a private well in Bradford County?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Towns in Bradford County

50 towns have fewer than 30 public samples and are included in the Bradford County totals above rather than shown separately: Alba borough, Albany township, Armenia township, Asylum township, Athens borough, Athens township, Burlington borough, Burlington township, Canton borough, Canton township, Columbia township, Franklin township, Granville township, Herrick township, LeRaysville borough, Leroy township, Litchfield township, Monroe borough, Monroe township, New Albany borough, North Towanda township, Orwell township, Overton township, Pike township, Ridgebury township, Rome borough, Rome township, Sayre borough, Sheshequin township, Smithfield township, South Creek township, South Waverly borough, Springfield township, Standing Stone township, Stevens township, Sylvania borough, Terry township, Towanda borough, Towanda township, Troy borough, Troy township, Tuscarora township, Ulster township, Warren township, Wells township, Wilmot township, Windham township, Wyalusing borough, Wyalusing township, Wysox township.

Counties near Bradford County

Closest first. Groundwater does not stop at a line on a map, so the next county over is a fair second opinion.

Want the numbers themselves? Download the Pennsylvania dataset as CSV, every county and town, with the sources named.

Sources

  • USGS Water Quality Portal: 2,445 samples in Bradford County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
  • Penn State Agricultural Analytical Services Lab drinking water summaries: summaries for 10 contaminants in Bradford County, up to 235 wells each. County summaries of private water samples tested by the Penn State Agricultural Analytical Services Laboratory since 2007, published by the College of Agricultural Sciences. Counts are samples, not distinct wells. Shares are against the standard the lab prints: the EPA maximum contaminant level, or the secondary standard for iron, manganese and chloride. Lead is the first-draw result. Medians printed as 0.00 are stored as null because the lab rounds to two decimals. Retrieved September 16, 2026.
  • USGS national arsenic model (Ayotte 2017): estimated share of 39,231 people on private wells in Bradford County above 10 ug/L of arsenic, from geology, well depth and land use. County estimates of domestic well users with arsenic above 10 ug/L from the USGS national logistic regression model (Ayotte, Medalie and Qi, 2017), with private well population from the USGS 2015 county water-use compilation (Dieter and others, 2018). Retrieved September 15, 2026.
  • Pennsylvania Groundwater Information System (PaGWIS) wells: 6,219 well records in Bradford County, 4,469 domestic. Water well records from the Pennsylvania Groundwater Information System, Pennsylvania Geological Survey (DCNR). Only aggregates are shown; owner names and addresses are never stored. Retrieved September 16, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.