Well water in Wilmot, New Hampshire
In Wilmot, 31% of 105 private wells tested between 2006 and 2020 had arsenic above the New Hampshire guidance level (5 ug/L), according to NH DHHS.
115 private wells tested 2006 to 2020 in state summaries; 10 individual samples from 9 wells, 1986 to 1994. Data refreshed September 3, 2026.
Separately, a USGS and NHDES statistical model puts the chance that a bedrock well in Wilmot exceeds 5 ug/L of arsenic at 38% (as low as 10% in parts of town), based on geology rather than tests.
What homeowner tests found
NH DHHS WISDOM private well summaries: private wells tested and reported to the state, 2006 to 2020. Shares are against the level the state applies to each contaminant, named in the last column; several are stricter than EPA.
| Contaminant | Wells tested | Above state level | Median | 95th pct | Highest | State level | |
|---|---|---|---|---|---|---|---|
| Radon | 50 | 36% | 1302 | 23,950 | 43,588 | 2,000 pCi/L | |
| Arsenic | 105 | 31% | 1.9 | 25 | 48.8 | 5 ug/L | |
| Sodium | 91 | 23% | 8.1 | 55.2 | 194 | 20 mg/L | |
| Iron | 91 | 20% | 100 | 1,100 | 26,000 | 300 ug/L | |
| Copper (stagnant) | 87 | 17% | 0.1 | 6.4 | 11.6 | 1.3 mg/L | |
| Lead (stagnant) | 87 | 14% | 2.5 | 40.1 | 884 | 15 ug/L | |
| Uranium | 95 | 3% | 1 | 18 | 42 | 30 ug/L | |
| Manganese | 91 | 2% | 0 | 200 | 21,300 | 300 ug/L | |
| Chloride | 96 | 2% | 4 | 80.3 | 410 | 250 mg/L | |
| Nitrate | 96 | 1% | 0 | 1.7 | 12 | 10 mg/L | |
| Fluoride | 115 | 0% | 0.6 | 2 | 3.6 | 4 mg/L | |
| Nitrite | 96 | 0% | 0 | 0 | 0 | 1 mg/L |
What individual samples found
Each row summarizes every public sample for that contaminant inside Wilmot. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.
| Contaminant | Samples | Detected | Above limit | Median | Highest | Limit | |
|---|---|---|---|---|---|---|---|
| Fluoride 1986 to 1994 | 10 | 80% | 0% | 0.3 | 1.4 | 4 mg/L EPA limit |
Sampled fewer than 10 times, too few to summarize: Nitrate (9), Lead (1), Copper (1), Manganese (9), Chloride (9), Sodium (9), Iron (2), Radon (1).
Get the free Wilmot well report
One email with the numbers above, what they mean for a home in Wilmot, exactly which tests to order, and what treatment fits the local profile. No spam, unsubscribe in one click.
What this means
Among homeowners in Wilmot who sent a sample to the state lab, the health-based limits most often exceeded were arsenic (31% of 105 wells), copper (17% of 87 wells), and lead (14% of 87 wells). These are ordinary wells tested by their owners, so the shares are the best available picture of a typical well here, with one caveat: people test more often when they suspect a problem.
Radon was above the New Hampshire guidance level of 2,000 pCi/L in 36% of 50 wells. Radon in water matters because it moves into indoor air during showers and laundry.
Sodium and iron exceed the state's advisory level in a sizable share of wells; these are mostly a taste, staining or diet issue rather than a toxicity one.
What to test for in Wilmot
- PFAS1 unlined landfill on record locally.
- Volatile organic compounds (VOCs)1 unlined landfill on record locally.
- Radon36% of 50 local wells tested were above the New Hampshire guidance level.
- Arsenic31% of 105 local wells tested were above the New Hampshire guidance level.
- Sodium23% of 91 local wells tested were above the New Hampshire guidance level.
- Iron20% of 91 local wells tested were above the New Hampshire guidance level.
- Copper17% of 87 local wells tested were above the New Hampshire guidance level.
- Lead14% of 87 local wells tested were above the New Hampshire guidance level.
- Uranium3% of 95 local wells tested were above the New Hampshire guidance level.
- Manganese2% of 91 local wells tested were above the New Hampshire guidance level.
Wells in Wilmot
251 domestic wells in Wilmot are on record with the state since 1984. 100% are drilled into bedrock, and the typical well is 385 feet deep (one in ten goes past 605 feet).
In a typical Wilmot well, bedrock starts about 26 feet down, the median yield is 6 gallons per minute, 22% of wells yield under 3 gallons per minute and usually need a storage tank.
Bedrock wells are where arsenic, uranium and radon come from: the water sits in fractures in granite and metamorphic rock and picks up whatever the rock carries. That is why testing for those three matters more here than in a dug or gravel well.
Find your own well's report
The state keeps the driller's report for most wells drilled since 1984. It tells you how deep your well is, where bedrock starts, and how much water it makes, which decides what treatment can work.
- Open NHDES OneStop and choose Water Well.
- Enter your town and one word of your street name. Leave out the house number and the Road or Street part; a short search matches more.
- In the results, click Show for your address to see the report: total depth, depth to bedrock, casing, yield in gallons per minute, static water level, and the driller.
- Save Results exports the whole list to a spreadsheet.
Reports exist only for wells drilled since January 1984, when reporting became mandatory, and street names are as they were when the well was drilled.
Contamination sources on record in Wilmot
NHDES records 1 unlined landfill and 1 reported spill or release in Wilmot, among 25 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.
- 1
- unlined landfillOlder unlined landfills are a leading source of PFAS, VOCs and metals in nearby wells.
- 1
- reported spill or releaseMost spills are fuel; a few are solvents or chemicals that reach the water table.
- 4
- registered underground storage tank sitesRegistered tanks are regulated and inspected; they matter most when they are old or near a shallow well.
- 4
- locally identified potential contamination sourcesTowns inventory these (vehicle repair, labs, salt piles, farms) when they draw wellhead protection maps.
- 15
- other remediation projects
Treatment that fits the local profile
- Arsenic
- Point-of-use reverse osmosis; Adsorptive media (iron-based) whole-house; Anion exchange
- Copper
- Neutralizing filter to raise pH; Point-of-use reverse osmosis
- Lead
- Point-of-use reverse osmosis; Certified lead-removal carbon filter; Neutralizing filter to raise pH and stop leaching
- Radon
- Aeration (bubble-up or diffused) whole-house; Granular activated carbon whole-house (lower levels only)
- Sodium
- Point-of-use reverse osmosis; Distillation
- Fluoride
- Point-of-use reverse osmosis; Activated alumina; Distillation
Book a free water test in Wilmot
A licensed local water treatment company tests your tap water in your home, walks you through the numbers, and quotes treatment only if something needs fixing. Free, about 30 minutes, no obligation.
Common questions
How deep are wells in Wilmot?
The typical domestic well in Wilmot is 385 feet deep, based on 251 wells reported to the state since 1984. One in ten is deeper than 605 feet. 100% are drilled into bedrock.
How high is radon in well water in Wilmot?
The median radon level across 1 public samples in Wilmot was 6,300 pCi/L, with a high of 6,300 pCi/L. New Hampshire recommends treatment above 2,000 pCi/L.
How often should I test a private well in Wilmot?
Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.
Sources
- USGS Water Quality Portal: 51 samples in Wilmot. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
- NH DHHS WISDOM private well summaries: summaries for 12 contaminants in Wilmot, up to 115 wells each. Town summaries of private well tests run by the New Hampshire Public Health Laboratories, published by NH DHHS through the WISDOM environmental public health tracking portal. Exceedance shares use New Hampshire guidance levels, which are stricter than EPA for arsenic (5 ug/L), manganese (0.3 mg/L), radon (2,000 pCi/L) and sodium (20 mg/L). Statistics for small counts are suppressed (*). Retrieved September 3, 2026.
- NHDES Water Well Inventory: 261 well records in Wilmot, 251 domestic. Well construction records reported to the New Hampshire Department of Environmental Services Water Well Board. Only aggregates are shown; owner names and addresses are never stored. Retrieved September 3, 2026.
- NHDES OneStop regulated sites: 25 regulated sites located in Wilmot. Remediation sites, underground storage tanks, solid waste facilities and potential contamination sources from the New Hampshire Department of Environmental Services OneStop database. Retrieved September 3, 2026.
Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.