Well Water Nerd

Well water in New Ipswich, New Hampshire

In New Ipswich, 34% of 70 private wells tested between 2006 and 2020 had arsenic above the New Hampshire guidance level (5 ug/L), according to NH DHHS.

72 private wells tested 2006 to 2020 in state summaries; 16 individual samples from 10 wells, 1987 to 2026. Data refreshed September 3, 2026.

NHDES samples private wells near known or suspected PFAS sources (industrial sites, airports, landfills, fire training areas), and wells with a detection are resampled over time. PFAS shares describe wells that were tested for a reason, not every well in the area. In that targeted sampling, 6% of 16 PFOA results in New Ipswich were above the EPA limit of 4 ng/L. In that targeted sampling, 0% of 16 PFHxS results in New Ipswich were above the EPA limit of 10 ng/L.

Separately, a USGS and NHDES statistical model puts the chance that a bedrock well in New Ipswich exceeds 5 ug/L of arsenic at 22% (as low as 10% in parts of town), based on geology rather than tests.

What homeowner tests found

NH DHHS WISDOM private well summaries: private wells tested and reported to the state, 2006 to 2020. Shares are against the level the state applies to each contaminant, named in the last column; several are stricter than EPA.

ContaminantWells testedAbove state levelMedian95th pctHighestState level
Radon3367%2,6501611721,0002,000 pCi/L
Sodium5840%14.312327320 mg/L
Arsenic7034%1.690.55235 ug/L
Iron6025%1002,40011,300300 ug/L
Copper
(stagnant)
4920%0.14.28.21.3 mg/L
Lead
(stagnant)
4920%274.316915 ug/L
Manganese587%0400900300 ug/L
Chloride704%9.6181470250 mg/L
Fluoride720%0.31.42.34 mg/L
Nitrate700%06.19.710 mg/L
Nitrite700%0001 mg/L
Uranium580%0.72.21630 ug/L

What individual samples found

Each row summarizes every public sample for that contaminant inside New Ipswich. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.

ContaminantSamplesDetectedAbove limitMedianHighestLimit
PFOA
2021 to 2026
1663%6%0.925134 ng/L
EPA limit
PFHxS
2021 to 2026
1638%0%04.710 ng/L
EPA limit
PFNA
2021 to 2026
160%0%0010 ng/L
EPA limit
PFOS
2021 to 2026
1613%0%00.384 ng/L
EPA limit
Manganese
1987 to 2012
1090%no limit80890300 ug/L
health guideline

Sampled fewer than 10 times, too few to summarize: Arsenic (9), Lead (9), Nitrate (7), Uranium (6), Fluoride (4), Copper (3), Sodium (4), Chloride (4).

Get the free New Ipswich well report

One email with the numbers above, what they mean for a home in New Ipswich, exactly which tests to order, and what treatment fits the local profile. No spam, unsubscribe in one click.

What this means

Among homeowners in New Ipswich who sent a sample to the state lab, the health-based limits most often exceeded were arsenic (34% of 70 wells), copper (20% of 49 wells), and lead (20% of 49 wells). These are ordinary wells tested by their owners, so the shares are the best available picture of a typical well here, with one caveat: people test more often when they suspect a problem.

Radon was above the New Hampshire guidance level of 2,000 pCi/L in 67% of 33 wells. Radon in water matters because it moves into indoor air during showers and laundry.

Sodium and iron exceed the state's advisory level in a sizable share of wells; these are mostly a taste, staining or diet issue rather than a toxicity one.

What to test for in New Ipswich

  • Volatile organic compounds (VOCs)3 leaking underground storage tank sites on record locally.
  • PFAS2 unlined landfills on record locally.
  • Metals panel1 hazardous waste site on record locally.
  • Radon67% of 33 local wells tested were above the New Hampshire guidance level.
  • Sodium40% of 58 local wells tested were above the New Hampshire guidance level.
  • Arsenic34% of 70 local wells tested were above the New Hampshire guidance level.
  • Iron25% of 60 local wells tested were above the New Hampshire guidance level.
  • Copper20% of 49 local wells tested were above the New Hampshire guidance level.
  • Lead20% of 49 local wells tested were above the New Hampshire guidance level.
  • Manganese7% of 58 local wells tested were above the New Hampshire guidance level.
  • PFOA6% of 16 local samples were above the limit.

Wells in New Ipswich

631 domestic wells in New Ipswich are on record with the state since 1984. 99% are drilled into bedrock, and the typical well is 405 feet deep (one in ten goes past 605 feet).

In a typical New Ipswich well, bedrock starts about 20 feet down, the median yield is 5 gallons per minute, 30% of wells yield under 3 gallons per minute and usually need a storage tank.

Bedrock wells are where arsenic, uranium and radon come from: the water sits in fractures in granite and metamorphic rock and picks up whatever the rock carries. That is why testing for those three matters more here than in a dug or gravel well.

113
1980s
59
1990s
202
2000s
145
2010s
111
2020s

Find your own well's report

The state keeps the driller's report for most wells drilled since 1984. It tells you how deep your well is, where bedrock starts, and how much water it makes, which decides what treatment can work.

  1. Open NHDES OneStop and choose Water Well.
  2. Enter your town and one word of your street name. Leave out the house number and the Road or Street part; a short search matches more.
  3. In the results, click Show for your address to see the report: total depth, depth to bedrock, casing, yield in gallons per minute, static water level, and the driller.
  4. Save Results exports the whole list to a spreadsheet.

Reports exist only for wells drilled since January 1984, when reporting became mandatory, and street names are as they were when the well was drilled.

Contamination sources on record in New Ipswich

NHDES records 3 leaking underground storage tank sites, 2 unlined landfills, 1 hazardous waste site, and 5 reported spills and releases in New Ipswich, among 63 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.

3
leaking underground storage tank sitesGasoline and heating oil that leaked from tanks move through groundwater as benzene, MTBE and other volatile organic compounds.
2
unlined landfillsOlder unlined landfills are a leading source of PFAS, VOCs and metals in nearby wells.
1
hazardous waste siteSolvents, degreasers and metals from industrial sites can travel far in fractured bedrock.
5
reported spills and releasesMost spills are fuel; a few are solvents or chemicals that reach the water table.
13
registered underground storage tank sitesRegistered tanks are regulated and inspected; they matter most when they are old or near a shallow well.
6
locally identified potential contamination sourcesTowns inventory these (vehicle repair, labs, salt piles, farms) when they draw wellhead protection maps.
32
other remediation projects
1
other solid waste facility

Treatment that fits the local profile

Arsenic
Point-of-use reverse osmosis; Adsorptive media (iron-based) whole-house; Anion exchange
Copper
Neutralizing filter to raise pH; Point-of-use reverse osmosis
Lead
Point-of-use reverse osmosis; Certified lead-removal carbon filter; Neutralizing filter to raise pH and stop leaching
Radon
Aeration (bubble-up or diffused) whole-house; Granular activated carbon whole-house (lower levels only)
Sodium
Point-of-use reverse osmosis; Distillation
PFOA
Granular activated carbon whole-house; Point-of-use reverse osmosis; Anion exchange

Book a free water test in New Ipswich

A licensed local water treatment company tests your tap water in your home, walks you through the numbers, and quotes treatment only if something needs fixing. Free, about 30 minutes, no obligation.

What are you worried about?

The test is free and there is no obligation. Your details go only to the company named above, and we log the time and address of this request.

Common questions

How deep are wells in New Ipswich?

The typical domestic well in New Ipswich is 405 feet deep, based on 631 wells reported to the state since 1984. One in ten is deeper than 605 feet. 99% are drilled into bedrock.

Is there arsenic in well water in New Ipswich?

Arsenic was detected in 56% of 9 public well samples in New Ipswich, and 0% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.

How often should I test a private well in New Ipswich?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Sources

  • NHDES PFAS sampling: 64 samples in New Ipswich. PFAS results for private wells from the New Hampshire Department of Environmental Services Environmental Monitoring Database. Retrieved September 3, 2026.
  • USGS Water Quality Portal: 56 samples in New Ipswich. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
  • NH DHHS WISDOM private well summaries: summaries for 12 contaminants in New Ipswich, up to 72 wells each. Town summaries of private well tests run by the New Hampshire Public Health Laboratories, published by NH DHHS through the WISDOM environmental public health tracking portal. Exceedance shares use New Hampshire guidance levels, which are stricter than EPA for arsenic (5 ug/L), manganese (0.3 mg/L), radon (2,000 pCi/L) and sodium (20 mg/L). Statistics for small counts are suppressed (*). Retrieved September 3, 2026.
  • NHDES Water Well Inventory: 662 well records in New Ipswich, 631 domestic. Well construction records reported to the New Hampshire Department of Environmental Services Water Well Board. Only aggregates are shown; owner names and addresses are never stored. Retrieved September 3, 2026.
  • NHDES OneStop regulated sites: 63 regulated sites located in New Ipswich. Remediation sites, underground storage tanks, solid waste facilities and potential contamination sources from the New Hampshire Department of Environmental Services OneStop database. Retrieved September 3, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.