Well Water Nerd

Fluoride in Missouri well water

In Missouri, <1% of 10,575 private wells tested between 2010 and 2023 had fluoride above the EPA limit (4 mg/L), according to Missouri DHSS.

Natural fluoride in bedrock wells can exceed the limit. Above 4 mg/L long-term exposure causes skeletal fluorosis; above 2 mg/L children can develop tooth mottling.

Check your fluoride number

Type the value from your lab report. It is compared to the EPA limit and the EPA limit, the same way the full interpretation does it.

Test your Missouri well for fluoride

Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.

Order the Tap Score well water test kit, from $209Already tested? Upload the report

Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says.

Systems that remove fluoride

Some links below are affiliate links. If you buy through one, the merchant pays us a commission at no extra cost to you. It does not change which products we list or what the data says.

Some links below are affiliate links. If you buy through one, the merchant pays us a commission at no extra cost to you. It does not change which products we list or what the data says.

For fluoride

Under-sink reverse osmosis system

under-sink or countertop, about $300

Look for NSF/ANSI 58 certification listing the contaminant you need removed.

For fluoride

Aquasana SmartFlow reverse osmosis

under-sink or countertop, about $225

Certified to NSF/ANSI 58 and 53 to reduce arsenic (96%, pentavalent), fluoride (90%), lead (99%), nitrate, nitrite and PFOA/PFOS at the kitchen tap, with a remineralizer.

Rather have it installed and sized for your well? Book a free in-home water test with a licensed local company.

Where to get a well tested for fluoride in Missouri: certified labs, state programs and prices.

By county, from homeowner tests

Share of private wells above the state guidance level (4 mg/L) in tests homeowners sent to the state lab, 2010 to 2023.

CountyAbove state levelWells testedHighest
Lincoln100
Henry62
Pike39
Montgomery60
Iron62
St. Francois265
Madison503
St. Charles55
Lewis116
Livingston33
McDonald233
Clark80
Reynolds84
Cape Girardeau459
Marion157

By county, from individual samples

Public monitoring samples against the EPA limit (4 mg/L); counties with at least 30 samples.

CountyAbove EPA limitSamplesDetectedMedianHighest
Vernon76100%15.55 mg/L
St. Louis80100%0.413 mg/L
Henry31100%0.54.5 mg/L
Stoddard39100%0.239 mg/L
Grundy31100%0.415 mg/L
Jackson489100%0.316 mg/L
Clay13099%0.245 mg/L
Jefferson149100%0.18.8 mg/L
St. Charles32298%0.34.5 mg/L
Phelps38100%0.11.6 mg/L
Carroll30100%0.31.5 mg/L
Saline45100%0.63 mg/L
Macon79100%0.42.8 mg/L
Johnson32100%0.83.7 mg/L
Boone1,52297%0.231.9 mg/L

Sources

  • Missouri DHSS private well sampling summaries: County summaries of private well samples analyzed by the Missouri State Public Health Laboratory, 2010 to 2023, published by the Missouri Department of Health and Senior Services. Counts are samples, not distinct wells. Shares are against the EPA maximum contaminant level, or the EPA secondary standard for chloride and iron. Counties with fewer than 20 samples are flagged unreliable by DHSS and are kept here with their counts so the threshold rule can judge them. Barium, sulfate and zinc layers exist but have no contaminant page yet. Retrieved September 15, 2026.
  • Individual samples from the USGS Water Quality Portal and state monitoring, summarized per geography. fluoride counts and shares are listed on each county and town page with their sources.