Well Water Nerd

Well water in Price County, Wisconsin

In Price County, 12% of 106 private wells tested between 1999 and 2025 had total coliform above the Wisconsin limit (any detection), according to the UWSP Well Water Quality Viewer.

825 private wells tested 1999 to 2025 in state summaries; 1 individual samples from 1 wells, 1975. Data refreshed September 9, 2026.

What homeowner tests found

Wisconsin Well Water Quality Viewer samples: private wells tested and reported to the state, 1999 to 2025. Shares are against the level the state applies to each contaminant, named in the last column; several are stricter than EPA. County and state figures combine the town summaries, weighted by wells tested; medians are not combined.

ContaminantWells testedAbove state levelMedian95th pctHighestState level
Iron3348%15,370300 ug/L
Manganese3318%4,398300 ug/L
E. coli1217%
Total coliform10612%
Sodium316%11420 mg/L
Chloride861%1,020250 mg/L
Nitrate825<1%12910 mg/L
Arsenic1090%8.7810 ug/L
Lead350%515 ug/L
Copper330%0.4431.3 mg/L

Get the free Price County well report

One email with the numbers above, what they mean for a home in Price County, exactly which tests to order, and what treatment fits the local profile. No spam, unsubscribe in one click.

What this means

Among homeowners in Price County who sent a sample to the state lab, the health-based limits most often exceeded were E. coli (17% of 12 wells), total coliform (12% of 106 wells), and nitrate (<1% of 825 wells). These are ordinary wells tested by their owners, so the shares are the best available picture of a typical well here, with one caveat: people test more often when they suspect a problem.

Iron and manganese exceed the state's advisory level in a sizable share of wells; these are mostly a taste, staining or diet issue rather than a toxicity one.

What to test for in Price County

  • Volatile organic compounds (VOCs)52 leaking underground storage tank sites on record locally.
  • Iron48% of 33 local wells tested were above the Wisconsin nuisance level.
  • Manganese18% of 33 local wells tested were above the Wisconsin enforcement standard.
  • E. coli17% of 12 local wells tested were above the Wisconsin limit (any detection).
  • Total coliform12% of 106 local wells tested were above the Wisconsin limit (any detection).
  • Sodium6% of 31 local wells tested were above the EPA advisory level.
  • Chloride1% of 86 local wells tested were above the Wisconsin nuisance level.
  • Nitrate<1% of 825 local wells tested were above the Wisconsin enforcement standard.

Contamination sources on record in Price County

Wisconsin DNR records 52 leaking underground storage tank sites in Price County, among 200 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.

52
leaking underground storage tank sitesGasoline and heating oil that leaked from tanks move through groundwater as benzene, MTBE and other volatile organic compounds.
27
lined landfills and transfer facilities
121
other remediation projects

Treatment that fits the local profile

E. coli
Shock chlorination and fix the well cap or casing; UV disinfection whole-house; Chlorination system
Total coliform
Inspect and repair the well cap and casing, then shock chlorinate and retest; UV disinfection whole-house; Chlorination system
Iron
Oxidizing filter whole-house; Water softener (low levels); Aeration plus filtration
Manganese
Oxidizing filter (greensand, birm) whole-house; Water softener (low levels); Point-of-use reverse osmosis
Sodium
Point-of-use reverse osmosis; Distillation

Get your Price County water tested at home

A licensed local water treatment company tests your tap water in your home, walks you through the numbers, and quotes treatment only if something needs fixing. Free, about 30 minutes, no obligation. Tell us what you need and we match you with a company that serves Price County.

What are you worried about?

The test is free and there is no obligation. Your details go only to the company named above, and we log the time and address of this request.

Common questions

How often should I test a private well in Price County?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Towns in Price County

14 towns have fewer than 30 public samples and are included in the Price County totals above rather than shown separately: Catawba, Catawba village, Emery, Georgetown, Hackett, Harmony, Hill, Kennan, Kennan village, Knox, Park Falls, Phillips, Prentice village, Spirit.

Sources

  • USGS Water Quality Portal: 1 samples in Price County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
  • Wisconsin Well Water Quality Viewer samples: summaries for 10 contaminants in Price County, up to 825 wells each. Private well samples compiled by the UWSP Center for Watershed Science and Education from the DNR Groundwater Retrieval Network, DATCP surveys, the UWSP Water and Environmental Analysis Lab and county health programs, published in the Wisconsin Well Water Quality Viewer with Wisconsin DHS. Samples are located to the town, village or city they fall in; one result per well and parameter (the latest) so repeat samples do not double count; wells without a state well number are keyed by location. Shares are against Wisconsin NR 140 enforcement standards (arsenic 10 ug/L, nitrate 10 mg/L as N, manganese 300 ug/L, lead 15 ug/L, copper 1.3 mg/L) and the iron and chloride secondary levels. Many samples were submitted by homeowners with a reason to test, so shares can run above a random survey. Retrieved September 9, 2026.
  • Wisconsin DNR regulated sites: 200 regulated sites located in Price County. Open and closed remediation activities (BRRTS, including leaking underground storage tanks and spills) and landfill and waste sites from the Wisconsin Department of Natural Resources. Retrieved September 9, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.