Well water in Rock Falls, Wisconsin
In Rock Falls, 2% of 257 private wells tested between 1993 and 2025 had nitrate above the Wisconsin enforcement standard (10 mg/L), according to the UWSP Well Water Quality Viewer.
257 private wells tested 2021 to 2021 in state summaries. Data refreshed September 9, 2026.
What homeowner tests found
Wisconsin Well Water Quality Viewer samples: private wells tested and reported to the state, 2021 to 2021. Shares are against the level the state applies to each contaminant, named in the last column; several are stricter than EPA.
| Contaminant | Wells tested | Above state level | Median | 95th pct | Highest | State level | |
|---|---|---|---|---|---|---|---|
| Manganese | 1 | 100% | 2,370 | 2,370 | 2,370 | 300 ug/L | |
| Total coliform | 2 | 50% | |||||
| Nitrate | 257 | 2% | 0.13 | 5.02 | 17.6 | 10 mg/L | |
| Arsenic | 12 | 0% | 0 | 0 | 0 | 10 ug/L | |
| Chloride | 2 | 0% | 9.1 | 31.9 | 31.9 | 250 mg/L | |
| Copper | 1 | 0% | 0.153 | 0.153 | 0.153 | 1.3 mg/L | |
| Iron | 1 | 0% | 77 | 77 | 77 | 300 ug/L | |
| Sodium | 1 | 0% | 5.92 | 5.92 | 5.92 | 20 mg/L | |
| Lead | 1 | 0% | 0 | 0 | 0 | 15 ug/L | |
| E. coli | 1 | 0% |
Get the free Rock Falls well report
One email with the numbers above, what they mean for a home in Rock Falls, exactly which tests to order, and what treatment fits the local profile. No spam, unsubscribe in one click.
What this means
Among homeowners in Rock Falls who sent a sample to the state lab, the health-based limits most often exceeded were nitrate (2% of 257 wells). These are ordinary wells tested by their owners, so the shares are the best available picture of a typical well here, with one caveat: people test more often when they suspect a problem.
What to test for in Rock Falls
- Nitrate2% of 257 local wells tested were above the Wisconsin enforcement standard.
- Coliform bacteriaRecommended for every private well, every year.
Contamination sources on record in Rock Falls
Wisconsin DNR records 2 regulated sites in Rock Falls, among 2 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.
- 1
- lined landfill or transfer facility
- 1
- other remediation project
Get your Rock Falls water tested at home
A licensed local water treatment company tests your tap water in your home, walks you through the numbers, and quotes treatment only if something needs fixing. Free, about 30 minutes, no obligation. Tell us what you need and we match you with a company that serves Rock Falls.
Common questions
How often should I test a private well in Rock Falls?
Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.
Sources
- Wisconsin Well Water Quality Viewer samples: summaries for 10 contaminants in Rock Falls, up to 257 wells each. Private well samples compiled by the UWSP Center for Watershed Science and Education from the DNR Groundwater Retrieval Network, DATCP surveys, the UWSP Water and Environmental Analysis Lab and county health programs, published in the Wisconsin Well Water Quality Viewer with Wisconsin DHS. Samples are located to the town, village or city they fall in; one result per well and parameter (the latest) so repeat samples do not double count; wells without a state well number are keyed by location. Shares are against Wisconsin NR 140 enforcement standards (arsenic 10 ug/L, nitrate 10 mg/L as N, manganese 300 ug/L, lead 15 ug/L, copper 1.3 mg/L) and the iron and chloride secondary levels. Many samples were submitted by homeowners with a reason to test, so shares can run above a random survey. Retrieved September 9, 2026.
- Wisconsin DNR regulated sites: 2 regulated sites located in Rock Falls. Open and closed remediation activities (BRRTS, including leaking underground storage tanks and spills) and landfill and waste sites from the Wisconsin Department of Natural Resources. Retrieved September 9, 2026.
Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.