Well water in Milford, Wisconsin
In Milford, 16% of 51 private wells tested between 2015 and 2023 had arsenic above the Wisconsin enforcement standard (10 ug/L), according to the UWSP Well Water Quality Viewer.
97 private wells tested 2019 to 2019 in state summaries. Data refreshed September 9, 2026.
What homeowner tests found
Wisconsin Well Water Quality Viewer samples: private wells tested and reported to the state, 2019 to 2019. Shares are against the level the state applies to each contaminant, named in the last column; several are stricter than EPA.
| Contaminant | Wells tested | Above state level | Median | 95th pct | Highest | State level | |
|---|---|---|---|---|---|---|---|
| Total coliform | 1 | 100% | |||||
| Iron | 27 | 41% | 59 | 7,692 | 10,840 | 300 ug/L | |
| Arsenic | 51 | 16% | 0 | 17 | 31 | 10 ug/L | |
| Sodium | 29 | 10% | 4.77 | 41.2 | 101 | 20 mg/L | |
| Nitrate | 97 | 10% | 0.3 | 12.6 | 31.2 | 10 mg/L | |
| Lead | 36 | 3% | 0 | 9 | 41 | 15 ug/L | |
| Chloride | 38 | 0% | 19.3 | 88.8 | 225 | 250 mg/L | |
| Manganese | 36 | 0% | 11 | 237 | 244 | 300 ug/L | |
| Copper | 36 | 0% | 0.008 | 0.14 | 0.445 | 1.3 mg/L | |
| E. coli | 1 | 0% |
Get the free Milford well report
One email with the numbers above, what they mean for a home in Milford, exactly which tests to order, and what treatment fits the local profile. No spam, unsubscribe in one click.
What this means
Among homeowners in Milford who sent a sample to the state lab, the health-based limits most often exceeded were arsenic (16% of 51 wells), nitrate (10% of 97 wells), and lead (3% of 36 wells). These are ordinary wells tested by their owners, so the shares are the best available picture of a typical well here, with one caveat: people test more often when they suspect a problem.
Iron and sodium exceed the state's advisory level in a sizable share of wells; these are mostly a taste, staining or diet issue rather than a toxicity one.
What to test for in Milford
- Volatile organic compounds (VOCs)1 leaking underground storage tank site on record locally.
- Iron41% of 27 local wells tested were above the Wisconsin nuisance level.
- Arsenic16% of 51 local wells tested were above the Wisconsin enforcement standard.
- Sodium10% of 29 local wells tested were above the EPA advisory level.
- Nitrate10% of 97 local wells tested were above the Wisconsin enforcement standard.
- Lead3% of 36 local wells tested were above the Wisconsin enforcement standard.
- Coliform bacteriaRecommended for every private well, every year.
Contamination sources on record in Milford
Wisconsin DNR records 1 leaking underground storage tank site in Milford, among 6 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.
- 1
- leaking underground storage tank siteGasoline and heating oil that leaked from tanks move through groundwater as benzene, MTBE and other volatile organic compounds.
- 1
- lined landfill or transfer facility
- 4
- other remediation projects
Treatment that fits the local profile
- Arsenic
- Point-of-use reverse osmosis; Adsorptive media (iron-based) whole-house; Anion exchange
- Nitrate
- Point-of-use reverse osmosis; Anion exchange; Distillation
- Iron
- Oxidizing filter whole-house; Water softener (low levels); Aeration plus filtration
- Sodium
- Point-of-use reverse osmosis; Distillation
Get your Milford water tested at home
A licensed local water treatment company tests your tap water in your home, walks you through the numbers, and quotes treatment only if something needs fixing. Free, about 30 minutes, no obligation. Tell us what you need and we match you with a company that serves Milford.
Common questions
How often should I test a private well in Milford?
Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.
Sources
- Wisconsin Well Water Quality Viewer samples: summaries for 10 contaminants in Milford, up to 97 wells each. Private well samples compiled by the UWSP Center for Watershed Science and Education from the DNR Groundwater Retrieval Network, DATCP surveys, the UWSP Water and Environmental Analysis Lab and county health programs, published in the Wisconsin Well Water Quality Viewer with Wisconsin DHS. Samples are located to the town, village or city they fall in; one result per well and parameter (the latest) so repeat samples do not double count; wells without a state well number are keyed by location. Shares are against Wisconsin NR 140 enforcement standards (arsenic 10 ug/L, nitrate 10 mg/L as N, manganese 300 ug/L, lead 15 ug/L, copper 1.3 mg/L) and the iron and chloride secondary levels. Many samples were submitted by homeowners with a reason to test, so shares can run above a random survey. Retrieved September 9, 2026.
- Wisconsin DNR regulated sites: 6 regulated sites located in Milford. Open and closed remediation activities (BRRTS, including leaking underground storage tanks and spills) and landfill and waste sites from the Wisconsin Department of Natural Resources. Retrieved September 9, 2026.
Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.