Well water in White River, Wisconsin
In White River, none of 41 private wells tested between 1988 and 2025 had nitrate above the Wisconsin enforcement standard (10 mg/L), according to the UWSP Well Water Quality Viewer.
41 private wells tested 2022 to 2024 in state summaries; 1 individual samples from 1 wells, 1980 to 1986. Data refreshed September 9, 2026.
What homeowner tests found
Wisconsin Well Water Quality Viewer samples: private wells tested and reported to the state, 2022 to 2024. Shares are against the level the state applies to each contaminant, named in the last column; several are stricter than EPA.
Get the free White River well report
One email with the numbers above, what they mean for a home in White River, exactly which tests to order, and what treatment fits the local profile. No spam, unsubscribe in one click.
What this means
Among homeowners in White River who sent a sample to the state lab, no health-based limit was exceeded often enough to publish a share. That is good news, but a single well can still be the exception.
What to test for in White River
- Coliform bacteriaRecommended for every private well, every year.
- CopperDetected in 100% of local samples.
- NitrateRecommended for every private well, especially near farms or septic systems.
Contamination sources on record in White River
Wisconsin DNR records 4 regulated sites in White River, among 4 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.
- 2
- lined landfills and transfer facilities
- 2
- other remediation projects
Treatment that fits the local profile
- Copper
- Neutralizing filter to raise pH; Point-of-use reverse osmosis
Get your White River water tested at home
A licensed local water treatment company tests your tap water in your home, walks you through the numbers, and quotes treatment only if something needs fixing. Free, about 30 minutes, no obligation. Tell us what you need and we match you with a company that serves White River.
Common questions
How often should I test a private well in White River?
Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.
Sources
- USGS Water Quality Portal: 2 samples in White River. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
- Wisconsin Well Water Quality Viewer samples: summaries for 9 contaminants in White River, up to 41 wells each. Private well samples compiled by the UWSP Center for Watershed Science and Education from the DNR Groundwater Retrieval Network, DATCP surveys, the UWSP Water and Environmental Analysis Lab and county health programs, published in the Wisconsin Well Water Quality Viewer with Wisconsin DHS. Samples are located to the town, village or city they fall in; one result per well and parameter (the latest) so repeat samples do not double count; wells without a state well number are keyed by location. Shares are against Wisconsin NR 140 enforcement standards (arsenic 10 ug/L, nitrate 10 mg/L as N, manganese 300 ug/L, lead 15 ug/L, copper 1.3 mg/L) and the iron and chloride secondary levels. Many samples were submitted by homeowners with a reason to test, so shares can run above a random survey. Retrieved September 9, 2026.
- Wisconsin DNR regulated sites: 4 regulated sites located in White River. Open and closed remediation activities (BRRTS, including leaking underground storage tanks and spills) and landfill and waste sites from the Wisconsin Department of Natural Resources. Retrieved September 9, 2026.
Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.