Well Water Nerd

Well water in Elmore, Vermont

In Elmore, 5% of 95 private wells tested had arsenic above the Vermont limit (10 ug/L), according to the Vermont Department of Health.

105 private wells tested in state summaries. Data refreshed .

What homeowner tests found

Vermont Tracking private well summaries: private wells tested and reported to the state. Shares are against the level the state applies to each contaminant, named in the last column; several are stricter than EPA.

ContaminantWells testedAbove state levelMedian95th pctHighestState level
Radon268%1,1957,5759,4704,000 pCi/L
Arsenic955%*106710 ug/L
Gross alpha
Gross Alpha
482%0.86.119.915 pCi/L
Nitrate1050%0.251.131.910 mg/L
Fluoride940%0.10.2730.974 mg/L
Uranium660%*41520 ug/L

* suppressed by the publisher because too few wells were tested.

Get the free Elmore well report

One email with the numbers above, what they mean for a home in Elmore, exactly which tests to order, and what treatment fits the local profile. No spam, unsubscribe in one click.

What this means

Among homeowners in Elmore who sent a sample to the state lab, the health-based limits most often exceeded were arsenic (5% of 95 wells). These are ordinary wells tested by their owners, so the shares are the best available picture of a typical well here, with one caveat: people test more often when they suspect a problem.

Radon was above the Vermont advisory level of 4,000 pCi/L in 8% of 26 wells. Radon in water matters because it moves into indoor air during showers and laundry.

What to test for in Elmore

  • Volatile organic compounds (VOCs)3 leaking underground storage tank sites on record locally.
  • Radon8% of 26 local wells tested were above the Vermont advisory level.
  • Arsenic5% of 95 local wells tested were above the Vermont limit.
  • Gross alpha2% of 48 local wells tested were above the Vermont limit.
  • Coliform bacteriaRecommended for every private well, every year.
  • NitrateRecommended for every private well, especially near farms or septic systems.

Wells in Elmore

236 domestic wells in Elmore are on record with the state since 1996. 98% are drilled into bedrock, and the typical well is 223 feet deep (one in ten goes past 399 feet).

In a typical Elmore well, bedrock starts about 26 feet down, the median yield is 12 gallons per minute, 8% of wells yield under 3 gallons per minute and usually need a storage tank.

Bedrock wells are where arsenic, uranium and radon come from: the water sits in fractures in granite and metamorphic rock and picks up whatever the rock carries. That is why testing for those three matters more here than in a dug or gravel well.

34
1990s
122
2000s
45
2010s
34
2020s

Contamination sources on record in Elmore

Vermont ANR records 3 leaking underground storage tank sites in Elmore, among 3 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.

3
leaking underground storage tank sitesGasoline and heating oil that leaked from tanks move through groundwater as benzene, MTBE and other volatile organic compounds.

Treatment that fits the local profile

Arsenic
Point-of-use reverse osmosis; Adsorptive media (iron-based) whole-house; Anion exchange
Radon
Aeration (bubble-up or diffused) whole-house; Granular activated carbon whole-house (lower levels only)

Book a free water test in Elmore

A licensed local water treatment company tests your tap water in your home, walks you through the numbers, and quotes treatment only if something needs fixing. Free, about 30 minutes, no obligation.

What are you worried about?

The test is free and there is no obligation. Your details go only to the company named above, and we log the time and address of this request.

Common questions

How deep are wells in Elmore?

The typical domestic well in Elmore is 223 feet deep, based on 236 wells reported to the state since 1996. One in ten is deeper than 399 feet. 98% are drilled into bedrock.

How often should I test a private well in Elmore?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Sources

  • Vermont Tracking private well summaries: summaries for 6 contaminants in Elmore, up to 105 wells each. Town summaries of private well tests reported to the Vermont Department of Health, published through Vermont Environmental Public Health Tracking. Shares are against the limit Vermont applies to each analyte: arsenic 10 ug/L, uranium 20 ug/L (stricter than EPA), fluoride 4 mg/L, nitrate 10 mg/L, gross alpha 15 pCi/L, radon 4,000 pCi/L advisory. Only towns with 20 or more results are published; statistics below the reporting limit show as *. Retrieved September 3, 2026.
  • Vermont ANR well completion reports: 242 well records in Elmore, 236 domestic. Well completion reports filed with the Vermont Agency of Natural Resources since 1966. Only aggregates are shown; owner names and addresses are never stored. Retrieved September 3, 2026.
  • Vermont ANR regulated sites: 3 regulated sites located in Elmore. Hazardous waste sites, landfills and underground storage tanks from the Vermont Agency of Natural Resources. Retrieved September 3, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.