Well water in Hansford County, Texas
In Hansford County, none of 49 tested well samples exceeded the EPA limit for arsenic, based on public data from Texas Water Development Board Groundwater Database and USGS Water Quality Portal.
49 individual samples from 16 wells, 1996 to 2024. Data refreshed September 9, 2026.
TWDB samples an ambient monitoring network of wells on a rotation, so these describe aquifers, not a survey of homeowners' tests.
What individual samples found
Each row summarizes every public sample for that contaminant inside Hansford County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.
| Contaminant | Samples | Detected | Above limit | Median | Highest | Limit | |
|---|---|---|---|---|---|---|---|
| Gross alpha 2008 to 2024 | 21 | 95% | 10% | 9.64 | 21.9 | 15 pCi/L EPA limit | |
| Arsenic 1996 to 2024 | 49 | 71% | 0% | 3.02 | 6.49 | 10 ug/L EPA limit | |
| Lead 1996 to 2024 | 48 | 0% | 0% | 0 | 0 | 15 ug/L EPA limit | |
| Nitrate 1996 to 2024 | 48 | 100% | 0% | 2.42 | 6.12 | 10 mg/L EPA limit | |
| Fluoride 1996 to 2024 | 48 | 100% | 0% | 1.73 | 2.52 | 4 mg/L EPA limit | |
| Copper 1996 to 2024 | 48 | 35% | 0% | 0 | 0.003 | 1.3 mg/L EPA limit | |
| Radium (226 + 228) 2008 to 2016 | 40 | 25% | 0% | 0 | 1.06 | 5 pCi/L EPA limit | |
| Uranium 1999 to 2024 | 27 | 100% | 0% | 9.45 | 21.6 | 30 ug/L EPA limit | |
| Iron 1996 to 2024 | 48 | 31% | no limit | 0 | 1,270 | 300 ug/L nuisance level | |
| Chloride 1996 to 2024 | 48 | 100% | no limit | 9.9 | 387 | 250 mg/L nuisance level | |
| Sodium 1996 to 2024 | 48 | 100% | no limit | 24.9 | 120 | 20 mg/L health guideline | |
| Manganese 1996 to 2024 | 48 | 54% | no limit | 0.422 | 24.6 | 300 ug/L health guideline |
Sampled fewer than 10 times, too few to summarize: Radon (1).
Get the free Hansford County well report
One email with the numbers above, what they mean for a home in Hansford County, exactly which tests to order, and what treatment fits the local profile. No spam, unsubscribe in one click.
What this means
The contaminants most often above their limit here are gross alpha (10% of 21 samples). A well next door can differ sharply from yours because bedrock fractures, well depth and plumbing all matter, so these rates describe the area, not your tap.
Chloride and Manganese are widespread in local groundwater. They are mainly a staining and taste problem, but high manganese also carries a health advisory for infants.
What to test for in Hansford County
- Volatile organic compounds (VOCs)11 leaking underground storage tank sites on record locally.
- Gross alpha10% of 21 local samples were above the limit.
- Coliform bacteriaRecommended for every private well, every year.
- RadonMedian local reading is 270 pCi/L.
- FluorideDetected in 100% of local samples.
- ChlorideDetected in 100% of local samples.
- NitrateRecommended for every private well, especially near farms or septic systems.
- ManganeseDetected in 54% of local samples.
Contamination sources on record in Hansford County
TCEQ records 11 leaking underground storage tank sites in Hansford County, among 14 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.
- 11
- leaking underground storage tank sitesGasoline and heating oil that leaked from tanks move through groundwater as benzene, MTBE and other volatile organic compounds.
- 3
- lined landfills and transfer facilities
Treatment that fits the local profile
- Gross alpha
- Point-of-use reverse osmosis; Water softener (cation exchange) for radium; Anion exchange for uranium
- Fluoride
- Point-of-use reverse osmosis; Activated alumina; Distillation
- Chloride
- Point-of-use reverse osmosis; Distillation
- Manganese
- Oxidizing filter (greensand, birm) whole-house; Water softener (low levels); Point-of-use reverse osmosis
Get your Hansford County water tested at home
A licensed local water treatment company tests your tap water in your home, walks you through the numbers, and quotes treatment only if something needs fixing. Free, about 30 minutes, no obligation. Tell us what you need and we match you with a company that serves Hansford County.
Common questions
Is there arsenic in well water in Hansford County?
Arsenic was detected in 71% of 49 public well samples in Hansford County, and 0% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.
How high is radon in well water in Hansford County?
The median radon level across 1 public samples in Hansford County was 270 pCi/L, with a high of 270 pCi/L. New Hampshire recommends treatment above 2,000 pCi/L.
How often should I test a private well in Hansford County?
Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.
Sources
- Texas Water Development Board Groundwater Database: 515 samples in Hansford County. Water quality samples from the Texas Water Development Board Groundwater Database, collected by TWDB, groundwater conservation districts and cooperators. Retrieved September 9, 2026.
- USGS Water Quality Portal: 7 samples in Hansford County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
- TCEQ regulated sites: 14 regulated sites located in Hansford County. Leaking petroleum storage tank sites, state Superfund sites and municipal solid waste landfills from the Texas Commission on Environmental Quality. Retrieved September 9, 2026.
Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.