Well Water Nerd

Well water in Bucks County, Pennsylvania

1in3

Testing strongly recommended

private wells tested between 2007 and 2025 in Bucks County had total coliform above the EPA limit (0 MPN/100mL), according to the Penn State water testing lab.

The strongest signal is PFOA: 35% of 17 local samples were above the limit, too few samples to carry the headline but first on the test list below.

562 private wells tested 2007 to 2025 in state summaries; 3,516 test results across 15 contaminants from at least 257 wells, 1925 to 2024; nitrate has the most at 511. Data refreshed September 16, 2026.

Compiled by Nick at Well Water Nerd from public records. How these pages are built

These are samples homeowners paid to send to the Penn State lab, often because of a suspected problem, so shares above the limit run higher than a random survey would find.

An estimated 133,620 people in Bucks County get their drinking water from a private well, per USGS 2015 county water use. That is about 21% of residents.

Separately, the USGS national arsenic model estimates that 2% of the 133,620 people on private wells in Bucks County draw water above 10 ug/L (the model's range is 1% to 3%), from geology and well depth rather than local tests.

What homeowner tests found

Penn State Agricultural Analytical Services Lab drinking water summaries: private wells tested and reported to the state, 2007 to 2025. Shares are against the level the state applies to each contaminant, named in the last column; several are stricter than EPA.

ContaminantAbove state levelWells testedMedian95th pctHighestState level
Total coliform5622450 MPN/100mL
Manganese302101,00050 ug/L
Lead
(first draw)
23915215 ug/L
Iron3011004,200300 ug/L
Arsenic2532310 ug/L
E. coli5622010 MPN/100mL
Nitrate
+ nitrite as N
2422.121810 mg/L
Copper3730.033.151.3 mg/L
Chloride6533.5247250 mg/L
Sodium5020.6340

What individual samples found

Each row summarizes every public sample for that contaminant inside Bucks County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.

ContaminantAbove limitSamplesDetectedMedianHighestLimit
PFOA
2023 to 2024
1771%3.2294 ng/L
EPA limit
PFOS
2023 to 2024
1765%3.3134 ng/L
EPA limit
E. coli
2003 to 2021
1020%030 MPN/100mL
EPA limit
Nitrate
1925 to 2024
51186%1.969010 mg/L
EPA limit
Radium (226 + 228)
1986 to 2013
4288%0.144665 pCi/L
EPA limit
Arsenic
1979 to 2024
13570%1.55410 ug/L
EPA limit
Lead
1979 to 2024
29159%01815 ug/L
EPA limit
Fluoride
1946 to 2024
38279%0.072.44 mg/L
EPA limit
Copper
1979 to 2024
19778%00.2261.3 mg/L
EPA limit
Uranium
1986 to 2024
7888%0.93612.230 ug/L
EPA limit
Iron
1925 to 2024
no limit46684%150140,000300 ug/L
nuisance level
Chloride
1925 to 2024
no limit440100%14.5717250 mg/L
nuisance level
Manganese
1950 to 2024
no limit42585%2016,000300 ug/L
health guideline
Sodium
1925 to 2024
no limit36299%1316120 mg/L
health guideline
Radon
1986 to 2024
no limit14399%1,30014,0002,000 pCi/L
health guideline

Over time

Share of samples above the limit by period. A cell needs ten samples to show; a comparison needs twenty in each period. Later periods sample fewer wells, and often the ones already known to have a problem.

Contaminantbefore 20002000s2010s2020s
Nitrate18%386 samples18%28 samples20%74 samples22%23 samples
Fluoride0%233 samples0%26 samples0%100 samples0%23 samples
Lead0%231 samples4%26 samples0%11 samples0%23 samples
Copper0%137 samples0%26 samples0%11 samples0%23 samples
Arsenic8%75 samples12%26 samples0%11 samples13%23 samples
Uranium0%18 samples0%26 samples0%11 samples0%23 samples

Nitrate, fluoride, lead, copper, arsenic, uranium have held within a few points between the two most recent periods with enough samples.

Closer than the county

See the sampled wells near your address

The same records, drawn around one point: which wells within a few miles were sampled and what they found, how deep the wells next to you were drilled, and any leaking tank or cleanup site within a mile.

Check my address

What this means

Among homeowners in Bucks County who sent a sample to the state lab, the health-based limits most often exceeded were total coliform (32% of 562 wells), lead (10% of 239 wells), and arsenic (8% of 253 wells). These are ordinary wells tested by their owners, so the shares are the best available picture of a typical well here, with one caveat: people test more often when they suspect a problem.

Manganese exceeds the state's advisory level in a sizable share of wells; this is mostly a taste, staining or diet issue rather than a toxicity one.

What to test for in Bucks County

  1. 1
    PFOA
    35% of 17 local samples were above the limit.
  2. 2
    Total coliform
    32% of 562 local wells tested were above the EPA limit.
  3. 3
    PFOS
    29% of 17 local samples were above the limit.
  4. 4
    E. coli
    20% of 10 local samples were above the limit.
  5. 5
    Nitrate
    18% of 511 local samples were above the limit.
  6. 6
    Lead
    10% of 239 local wells tested were above the EPA limit.
  7. 7
    Radium (226 + 228)
    10% of 42 local samples were above the limit.
  8. 8
    Arsenic
    9% of 135 local samples were above the limit.

Test your Bucks County well for PFOA, total coliform and PFOS

Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.

Order the Tap Score well water test kit, from $209Already tested? Upload the report

Just want bacteria checked first? Tap Score coliform and E. coli test, $99. Coliform and E. coli are the tests every well needs every year.

Want a quick look before paying for a lab? Home well water test strips on Amazon check hardness, iron, pH and nitrate in minutes. They are a screen, not a result: arsenic, bacteria, uranium and PFAS need a certified lab.

Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says. As an Amazon Associate we earn from qualifying purchases.

Where to get a well tested in Pennsylvania: certified labs, state programs and prices.

Already have results back? Get your lab report read against the Bucks County numbers, $29. Every line explained, ranked by what matters, with the fix for each.

Wells in Bucks County

9,259 domestic wells in Bucks County are on record with the state. 100% are drilled into bedrock, and the typical well is 200 feet deep (one in ten goes past 460 feet).

In a typical Bucks County well, bedrock starts about 12 feet down, the median yield is 15 gallons per minute, 5% of wells yield under 3 gallons per minute and usually need a storage tank.

Bedrock wells are where arsenic, uranium and radon come from: the water sits in fractures in granite and metamorphic rock and picks up whatever the rock carries. That is why testing for those three matters more here than in a dug or gravel well.

Find your own well's report

The state keeps the driller's report for most wells drilled since 1984. It tells you how deep your well is, where bedrock starts, and how much water it makes, which decides what treatment can work.

  1. Open PaGWIS (Pennsylvania Geological Survey) and choose Water Well.
  2. The record lists depth, depth to bedrock, yield and use; drillers have reported new wells to the state since 1966.

Pennsylvania has no private well construction standard and does not require testing, so many older wells have no record at all.

The rock under Bucks County

Early Mesozoic basin aquifers

Sandstone. Sandstone wells draw from pore space in the rock and tend to be dependable. Iron, manganese and hardness are common, and some sandstones carry arsenic or radium, so a first test should include both.

Classification from the USGS Principal Aquifers of the United States (national map, 2003 edition, GIS release 2015), read at the county centroid. A single well can sit in a different unit, especially near a boundary.

Official help in Pennsylvania

Two places to start that are not selling anything: the state program that answers private well questions, and its list of labs certified to run drinking water tests. A certified lab is the difference between a result you can act on and a number.

Treatment that fits the local profile

Total coliform

Inspect and repair the well cap and casing, then shock chlorinate and retest; UV disinfection whole-house; Chlorination system

Lead

Point-of-use reverse osmosis; Certified lead-removal carbon filter; Neutralizing filter to raise pH and stop leaching

Arsenic

Point-of-use reverse osmosis; Adsorptive media (iron-based) whole-house; Anion exchange

Manganese

Oxidizing filter (greensand, birm) whole-house; Water softener (low levels); Point-of-use reverse osmosis

Iron

Oxidizing filter whole-house; Water softener (low levels); Aeration plus filtration

PFOA

Granular activated carbon whole-house; Point-of-use reverse osmosis; Anion exchange

Systems we would look at first

Some links below are affiliate links. If you buy through one, the merchant pays us a commission at no extra cost to you. It does not change which products we list or what the data says.

For total coliform

Aquasana Rhino Well Water with UV

whole-house, at the point of entry, about $2,871

Whole-house system built for wells: sediment pre-filter, KDF and carbon, and a UV lamp rated to kill 99.99% of bacteria and viruses. It does not remove arsenic, nitrate, uranium or radon.

For lead

Under-sink reverse osmosis system

under-sink or countertop, about $300

Look for NSF/ANSI 58 certification listing the contaminant you need removed.

For lead

Acid neutralizing filter

whole-house, at the point of entry, about $1,200

Raises pH so plumbing stops leaching lead and copper.

For lead

Aquasana SmartFlow reverse osmosis

under-sink or countertop, about $225

Certified to NSF/ANSI 58 and 53 to reduce arsenic (96%, pentavalent), fluoride (90%), lead (99%), nitrate, nitrite and PFOA/PFOS at the kitchen tap, with a remineralizer.

For arsenic

Whole-house arsenic and uranium filter

whole-house, at the point of entry, about $2,500

Adsorptive iron-based media; sized to your well yield.

For manganese

Iron and manganese oxidizing filter

whole-house, at the point of entry, about $1,800

Air-injection or greensand media; fixes staining at the source.

Free, no obligation

Get on the list for a free in-home water test in Bucks County

No water treatment company serves Bucks County through Well Water Nerd yet. We are signing licensed companies on county by county: they test at your tap for free, walk you through the numbers, and quote treatment only if something needs fixing. Leave your details and you are first in line. Nothing is shared until a company joins for Bucks County, and you get an email naming it first.

What are you worried about?

The test is free and there is no obligation. No company is named yet; your details stay with us until one joins for your area, and we log the time and address of this request.

Common questions

How deep are wells in Bucks County?

The typical domestic well in Bucks County is 200 feet deep, based on 9,259 wells reported to the state. One in ten is deeper than 460 feet. 100% are drilled into bedrock.

Is there arsenic in well water in Bucks County?

Arsenic was detected in 70% of 135 public well samples in Bucks County, and 9% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.

How high is radon in well water in Bucks County?

The median radon level across 143 public samples in Bucks County was 1,300 pCi/L, with a high of 14,000 pCi/L. New Hampshire recommends treatment above 2,000 pCi/L.

How often should I test a private well in Bucks County?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Towns in Bucks County

51 towns have fewer than 30 public samples and are included in the Bucks County totals above rather than shown separately: Bedminster township, Bridgeton township, Bristol borough, Bristol township, Buckingham township, Chalfont borough, Doylestown borough, Doylestown township, Dublin borough, Durham township, East Rockhill township, Haycock township, Hilltown township, Hulmeville borough, Ivyland borough, Langhorne borough, Langhorne Manor borough, Lower Makefield township, Lower Southampton township, Middletown township, Milford township, Morrisville borough, New Britain borough, New Britain township, New Hope borough, Newtown borough, Newtown township, Nockamixon township, Northampton township, Penndel borough, Perkasie borough, Plumstead township, Quakertown borough, Richlandtown borough, Richland township, Riegelsville borough, Sellersville borough, Silverdale borough, Solebury township, Springfield township, Telford borough, Tinicum township, Trumbauersville borough, Tullytown borough, Upper Makefield township, Upper Southampton township, Warrington township, Warwick township, West Rockhill township, Wrightstown township, Yardley borough.

Counties near Bucks County

Closest first. Groundwater does not stop at a line on a map, so the next county over is a fair second opinion.

Want the numbers themselves? Download the Pennsylvania dataset as CSV, every county and town, with the sources named.

Sources

  • USGS Water Quality Portal: 3,516 samples in Bucks County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
  • Penn State Agricultural Analytical Services Lab drinking water summaries: summaries for 10 contaminants in Bucks County, up to 562 wells each. County summaries of private water samples tested by the Penn State Agricultural Analytical Services Laboratory since 2007, published by the College of Agricultural Sciences. Counts are samples, not distinct wells. Shares are against the standard the lab prints: the EPA maximum contaminant level, or the secondary standard for iron, manganese and chloride. Lead is the first-draw result. Medians printed as 0.00 are stored as null because the lab rounds to two decimals. Retrieved September 16, 2026.
  • USGS national arsenic model (Ayotte 2017): estimated share of 133,620 people on private wells in Bucks County above 10 ug/L of arsenic, from geology, well depth and land use. County estimates of domestic well users with arsenic above 10 ug/L from the USGS national logistic regression model (Ayotte, Medalie and Qi, 2017), with private well population from the USGS 2015 county water-use compilation (Dieter and others, 2018). Retrieved September 15, 2026.
  • Pennsylvania Groundwater Information System (PaGWIS) wells: 16,130 well records in Bucks County, 9,259 domestic. Water well records from the Pennsylvania Groundwater Information System, Pennsylvania Geological Survey (DCNR). Only aggregates are shown; owner names and addresses are never stored. Retrieved September 16, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.