Well Water Nerd

Well water in Wayne County, North Carolina

In Wayne County, 5% of 548 private wells tested between 1998 and 2019 had lead above the North Carolina groundwater standard (15 ug/L), according to the NC State Laboratory of Public Health (NCWELL).

548 private wells tested 1998 to 2019 in state summaries; 14 individual samples from 11 wells, 1948 to 2023. Data refreshed September 9, 2026.

What homeowner tests found

NCWELL private well summaries: private wells tested and reported to the state, 1998 to 2019. Shares are against the level the state applies to each contaminant, named in the last column; several are stricter than EPA.

ContaminantWells testedAbove state levelMedian95th pctHighestState level
Iron34566%62,000300 ug/L
Manganese54824%6,90050 ug/L
Lead5485%13015 ug/L
Nitrate2713%4410 mg/L
Arsenic547<1%1510 ug/L
Copper3430%0.581 mg/L
Nitrite2710%0.31 mg/L

What individual samples found

Each row summarizes every public sample for that contaminant inside Wayne County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.

ContaminantSamplesDetectedAbove limitMedianHighestLimit
Uranium
1994 to 2023
1450%0%0.0020.30530 ug/L
EPA limit
Manganese
1949 to 1999
12100%no limit57386300 ug/L
health guideline

Sampled fewer than 10 times, too few to summarize: Nitrate (9), Fluoride (7), Radium (226 + 228) (7), Copper (2), E. coli (1), Chloride (5), Sodium (5), Iron (3), Radon (3).

Get the free Wayne County well report

One email with the numbers above, what they mean for a home in Wayne County, exactly which tests to order, and what treatment fits the local profile. No spam, unsubscribe in one click.

What this means

Among homeowners in Wayne County who sent a sample to the state lab, the health-based limits most often exceeded were lead (5% of 548 wells), nitrate (3% of 271 wells), and arsenic (<1% of 547 wells). These are ordinary wells tested by their owners, so the shares are the best available picture of a typical well here, with one caveat: people test more often when they suspect a problem.

Iron and manganese exceed the state's advisory level in a sizable share of wells; these are mostly a taste, staining or diet issue rather than a toxicity one.

What to test for in Wayne County

  • Volatile organic compounds (VOCs)495 leaking underground storage tank sites on record locally.
  • Iron66% of 345 local wells tested were above the North Carolina groundwater standard.
  • Manganese24% of 548 local wells tested were above the North Carolina groundwater standard.
  • Lead5% of 548 local wells tested were above the North Carolina groundwater standard.
  • Nitrate3% of 271 local wells tested were above the EPA limit.
  • Arsenic<1% of 547 local wells tested were above the North Carolina groundwater standard.
  • Coliform bacteriaRecommended for every private well, every year.
  • RadonMedian local reading is 430 pCi/L.
  • ChlorideDetected in 100% of local samples.

Contamination sources on record in Wayne County

NC DEQ records 495 leaking underground storage tank sites in Wayne County, among 495 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.

495
leaking underground storage tank sitesGasoline and heating oil that leaked from tanks move through groundwater as benzene, MTBE and other volatile organic compounds.

Treatment that fits the local profile

Lead
Point-of-use reverse osmosis; Certified lead-removal carbon filter; Neutralizing filter to raise pH and stop leaching
Iron
Oxidizing filter whole-house; Water softener (low levels); Aeration plus filtration
Manganese
Oxidizing filter (greensand, birm) whole-house; Water softener (low levels); Point-of-use reverse osmosis
Fluoride
Point-of-use reverse osmosis; Activated alumina; Distillation
Chloride
Point-of-use reverse osmosis; Distillation

Get your Wayne County water tested at home

A licensed local water treatment company tests your tap water in your home, walks you through the numbers, and quotes treatment only if something needs fixing. Free, about 30 minutes, no obligation. Tell us what you need and we match you with a company that serves Wayne County.

What are you worried about?

The test is free and there is no obligation. Your details go only to the company named above, and we log the time and address of this request.

Common questions

How high is radon in well water in Wayne County?

The median radon level across 3 public samples in Wayne County was 430 pCi/L, with a high of 1,000 pCi/L. New Hampshire recommends treatment above 2,000 pCi/L.

How often should I test a private well in Wayne County?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Sources

  • USGS Water Quality Portal: 68 samples in Wayne County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
  • NCWELL private well summaries: summaries for 7 contaminants in Wayne County, up to 548 wells each. County summaries of private well tests run by the NC State Laboratory of Public Health, 1998 to 2019, compiled by the UNC Superfund Research Program (NCWELL database). Counts are tests, not distinct wells; since 2008 every new well is tested once, so most tests are unique wells. Shares are against the NC 2L groundwater standard where one exists (manganese 50 ug/L, lead 15, iron 300) and otherwise the EPA limit. Medians are not used because more than half of results sit at the reporting limit for most analytes. Retrieved September 9, 2026.
  • NC DEQ regulated sites: 495 regulated sites located in Wayne County. Underground storage tank incidents from the North Carolina Department of Environmental Quality UST Section. Retrieved September 9, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.