Well water in Sampson County, North Carolina
In Sampson County, 7% of 602 private wells tested between 1998 and 2019 had nitrate above the EPA limit (10 mg/L), according to the NC State Laboratory of Public Health (NCWELL).
1,406 private wells tested 1998 to 2019 in state summaries; 11 individual samples from 5 wells, 1958 to 2022. Data refreshed September 9, 2026.
What homeowner tests found
NCWELL private well summaries: private wells tested and reported to the state, 1998 to 2019. Shares are against the level the state applies to each contaminant, named in the last column; several are stricter than EPA.
What individual samples found
Each row summarizes every public sample for that contaminant inside Sampson County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.
| Contaminant | Samples | Detected | Above limit | Median | Highest | Limit | |
|---|---|---|---|---|---|---|---|
| Radium (226 + 228) 2013 to 2022 | 11 | 82% | 0% | 0.17 | 0.73 | 5 pCi/L EPA limit |
Sampled fewer than 10 times, too few to summarize: Nitrate (5), Uranium (6), E. coli (6), PFOA (3), PFOS (3), Copper (1), Iron (3), Radon (3), Sodium (2), Chloride (1), Manganese (1).
Get the free Sampson County well report
One email with the numbers above, what they mean for a home in Sampson County, exactly which tests to order, and what treatment fits the local profile. No spam, unsubscribe in one click.
What this means
Among homeowners in Sampson County who sent a sample to the state lab, the health-based limits most often exceeded were nitrate (7% of 602 wells), lead (2% of 1,401 wells), and copper (<1% of 790 wells). These are ordinary wells tested by their owners, so the shares are the best available picture of a typical well here, with one caveat: people test more often when they suspect a problem.
Iron and manganese exceed the state's advisory level in a sizable share of wells; these are mostly a taste, staining or diet issue rather than a toxicity one.
What to test for in Sampson County
- Volatile organic compounds (VOCs)238 leaking underground storage tank sites on record locally.
- Iron43% of 795 local wells tested were above the North Carolina groundwater standard.
- Manganese23% of 1,406 local wells tested were above the North Carolina groundwater standard.
- Nitrate7% of 602 local wells tested were above the EPA limit.
- Lead2% of 1,401 local wells tested were above the North Carolina groundwater standard.
- Copper<1% of 790 local wells tested were above the North Carolina groundwater standard.
- Nitrite<1% of 602 local wells tested were above the EPA limit.
- Arsenic<1% of 1,401 local wells tested were above the North Carolina groundwater standard.
- Coliform bacteriaRecommended for every private well, every year.
Contamination sources on record in Sampson County
NC DEQ records 238 leaking underground storage tank sites in Sampson County, among 238 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.
- 238
- leaking underground storage tank sitesGasoline and heating oil that leaked from tanks move through groundwater as benzene, MTBE and other volatile organic compounds.
Treatment that fits the local profile
- Nitrate
- Point-of-use reverse osmosis; Anion exchange; Distillation
- Iron
- Oxidizing filter whole-house; Water softener (low levels); Aeration plus filtration
- Manganese
- Oxidizing filter (greensand, birm) whole-house; Water softener (low levels); Point-of-use reverse osmosis
- Chloride
- Point-of-use reverse osmosis; Distillation
Get your Sampson County water tested at home
A licensed local water treatment company tests your tap water in your home, walks you through the numbers, and quotes treatment only if something needs fixing. Free, about 30 minutes, no obligation. Tell us what you need and we match you with a company that serves Sampson County.
Common questions
How high is radon in well water in Sampson County?
The median radon level across 3 public samples in Sampson County was 124 pCi/L, with a high of 149 pCi/L. New Hampshire recommends treatment above 2,000 pCi/L.
How often should I test a private well in Sampson County?
Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.
Sources
- USGS Water Quality Portal: 45 samples in Sampson County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
- NCWELL private well summaries: summaries for 7 contaminants in Sampson County, up to 1,406 wells each. County summaries of private well tests run by the NC State Laboratory of Public Health, 1998 to 2019, compiled by the UNC Superfund Research Program (NCWELL database). Counts are tests, not distinct wells; since 2008 every new well is tested once, so most tests are unique wells. Shares are against the NC 2L groundwater standard where one exists (manganese 50 ug/L, lead 15, iron 300) and otherwise the EPA limit. Medians are not used because more than half of results sit at the reporting limit for most analytes. Retrieved September 9, 2026.
- NC DEQ regulated sites: 238 regulated sites located in Sampson County. Underground storage tank incidents from the North Carolina Department of Environmental Quality UST Section. Retrieved September 9, 2026.
Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.