Well water in Troy, New Hampshire
No public well test results have been compiled for Troy yet. The USGS national arsenic model estimates that 15% of the 0 people on private wells there draw water with arsenic above 5 ug/L, the EPA limit, based on geology, well depth and land use rather than local tests.
The strongest signal is coliform bacteria: Recommended for every private well, every year, too few samples to carry the headline but first on the test list below.
1 test results across 1 contaminants from at least 1 wells, 1990. Data refreshed September 3, 2026.
Compiled by Nick at Well Water Nerd from public records. How these pages are built
Data confidence: estimate. No state program or federal monitoring data for Troy has been compiled here yet, so the arsenic figure is the USGS national model, not a measurement. Treat a high estimate as a reason to test, not as your well's number. Measured results are added as states publish them.
Closer than the town
See the sampled wells near your address
The same records, drawn around one point: which wells within a few miles were sampled and what they found, how deep the wells next to you were drilled, and any leaking tank or cleanup site within a mile.
Check my addressWhat this means
Among contaminants with a federal limit, no tested sample in Troy came back above it. That is reassuring, but sampling is uneven: wells that were never tested are not in this data.
The median radon reading (44,700 pCi/L) is above the 2,000 pCi/L level at which treatment is recommended. Radon in water raises indoor air radon when it is used for showers and laundry.
What to test for in Troy
- 1Coliform bacteriaRecommended for every private well, every year.
- 2RadonMedian local reading is 44,700 pCi/L.
- 3NitrateRecommended for every private well, especially near farms or septic systems.
- 4Volatile organic compounds (VOCs)1 leaking underground storage tank site on record locally.
- 5PFAS2 unlined landfills on record locally.
Test your Troy well for coliform bacteria, radon and nitrate
Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.
Order the Tap Score well water test kit, from $209Already tested? Upload the report
Just want bacteria checked first? Tap Score coliform and E. coli test, $99. Coliform and E. coli are the tests every well needs every year.
Want a quick look before paying for a lab? Home well water test strips on Amazon check hardness, iron, pH and nitrate in minutes. They are a screen, not a result: arsenic, bacteria, uranium and PFAS need a certified lab.
Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says. As an Amazon Associate we earn from qualifying purchases.
Where to get a well tested in New Hampshire: certified labs, state programs and prices.
Already have results back? Get your lab report read against the Troy numbers, $29. Every line explained, ranked by what matters, with the fix for each.
Wells in Troy
97 domestic wells in Troy are on record with the state since 1984. 99% are drilled into bedrock, and the typical well is 300 feet deep (one in ten goes past 505 feet).
In a typical Troy well, bedrock starts about 10 feet down, the median yield is 5 gallons per minute, 30% of wells yield under 3 gallons per minute and usually need a storage tank.
Bedrock wells are where arsenic, uranium and radon come from: the water sits in fractures in granite and metamorphic rock and picks up whatever the rock carries. That is why testing for those three matters more here than in a dug or gravel well.
Find your own well's report
The state keeps the driller's report for most wells drilled since 1984. It tells you how deep your well is, where bedrock starts, and how much water it makes, which decides what treatment can work.
- Open NHDES OneStop and choose Water Well.
- Enter your town and one word of your street name. Leave out the house number and the Road or Street part; a short search matches more.
- In the results, click Show for your address to see the report: total depth, depth to bedrock, casing, yield in gallons per minute, static water level, and the driller.
- Save Results exports the whole list to a spreadsheet.
Reports exist only for wells drilled since January 1984, when reporting became mandatory, and street names are as they were when the well was drilled.
The rock under Troy
Not a principal aquifer
The USGS map places this area outside any principal aquifer, which usually means wells here draw from fractured bedrock or thin local deposits rather than a large regional aquifer. Bedrock wells of that kind are where arsenic, radon and uranium turn up, and yields vary from well to well.
Classification from the USGS Principal Aquifers of the United States (national map, 2003 edition, GIS release 2015), read at the town centroid. A single well can sit in a different unit, especially near a boundary.
Official help in New Hampshire
Two places to start that are not selling anything: the state program that answers private well questions, and its list of labs certified to run drinking water tests. A certified lab is the difference between a result you can act on and a number.
Contamination sources on record in Troy
NHDES records 1 leaking underground storage tank site and 2 unlined landfills in Troy, among 38 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.
- 1
- leaking underground storage tank siteGasoline and heating oil that leaked from tanks move through groundwater as benzene, MTBE and other volatile organic compounds.
- 2
- unlined landfillsOlder unlined landfills are a leading source of PFAS, VOCs and metals in nearby wells.
- 7
- registered underground storage tank sitesRegistered tanks are regulated and inspected; they matter most when they are old or near a shallow well.
- 1
- locally identified potential contamination sourceTowns inventory these (vehicle repair, labs, salt piles, farms) when they draw wellhead protection maps.
- 26
- other remediation projects
- 1
- other solid waste facility
Treatment that fits the local profile
Radon
Aeration (bubble-up or diffused) whole-house; Granular activated carbon whole-house (lower levels only)
Free, no obligation
Get on the list for a free in-home water test in Troy
No water treatment company serves Troy through Well Water Nerd yet. We are signing licensed companies on county by county: they test at your tap for free, walk you through the numbers, and quote treatment only if something needs fixing. Leave your details and you are first in line. Nothing is shared until a company joins for Troy, and you get an email naming it first.
Common questions
How deep are wells in Troy?
The typical domestic well in Troy is 300 feet deep, based on 97 wells reported to the state since 1984. One in ten is deeper than 505 feet. 99% are drilled into bedrock.
How often should I test a private well in Troy?
Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.
Towns near Troy
Closest first. Groundwater does not stop at a line on a map, so the next town over is a fair second opinion.
Want the numbers themselves? Download the New Hampshire dataset as CSV, every county and town, with the sources named.
Sources
- USGS Water Quality Portal: 1 samples in Troy. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
- NH DHHS WISDOM private well summaries: modeled chance (15%) that a well in Troy exceeds 5 ug/L of arsenic, from geology rather than tests. Town summaries of private well tests run by the New Hampshire Public Health Laboratories, published by NH DHHS through the WISDOM environmental public health tracking portal. Retrieved September 3, 2026.
- NHDES Water Well Inventory: 117 well records in Troy, 97 domestic. Well construction records reported to the New Hampshire Department of Environmental Services Water Well Board. Only aggregates are shown; owner names and addresses are never stored. Retrieved September 3, 2026.
- NHDES OneStop regulated sites: 38 regulated sites located in Troy. Remediation sites, underground storage tanks, solid waste facilities and potential contamination sources from the New Hampshire Department of Environmental Services OneStop database. Retrieved September 3, 2026.
Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.