Well water in Elmore County, Idaho
In Elmore County, 18% of 73 tested well samples exceeded the EPA limit for total coliform (0 MPN/100mL), based on public data from Idaho statewide ground water quality monitoring (IDWR EDMS) and USGS Water Quality Portal.
381 individual samples from 105 wells, 1956 to 2025. Data refreshed September 9, 2026.
What individual samples found
Each row summarizes every public sample for that contaminant inside Elmore County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.
| Contaminant | Samples | Detected | Above limit | Median | Highest | Limit | |
|---|---|---|---|---|---|---|---|
| Total coliform 2014 to 2021 | 73 | 18% | 18% | 0 | 1120 | 0 MPN/100mL EPA limit | |
| Arsenic 1990 to 2025 | 272 | 87% | 17% | 3 | 54 | 10 ug/L EPA limit | |
| Nitrate 1956 to 2025 | 358 | 87% | 9% | 1.32 | 73.3 | 10 mg/L EPA limit | |
| Uranium 1991 to 2025 | 85 | 56% | 1% | 0.33 | 47 | 30 ug/L EPA limit | |
| Fluoride 1976 to 2025 | 275 | 92% | 1% | 0.42 | 9.8 | 4 mg/L EPA limit | |
| E. coli 1990 to 2009 | 381 | <1% | <1% | 0 | 1 | 0 MPN/100mL EPA limit | |
| Nitrite 1991 to 2021 | 254 | 8% | 0% | 0 | 0.489 | 1 mg/L EPA limit | |
| Copper 1990 to 2020 | 171 | 36% | 0% | 0 | 0.039 | 1.3 mg/L EPA limit | |
| Lead 1990 to 2006 | 91 | 9% | 0% | 0 | 1.3 | 15 ug/L EPA limit | |
| Chloride 1990 to 2025 | 295 | 100% | no limit | 12.1 | 370 | 250 mg/L nuisance level | |
| Sodium 1962 to 2025 | 284 | 100% | no limit | 23.8 | 230 | 20 mg/L health guideline | |
| Manganese 1980 to 2025 | 257 | 42% | no limit | 0 | 453 | 300 ug/L health guideline | |
| Iron 1990 to 2025 | 252 | 46% | no limit | 0 | 750 | 300 ug/L nuisance level | |
| Radon 1991 to 1995 | 33 | 100% | no limit | 480 | 1,900 | 2,000 pCi/L health guideline |
Get the free Elmore County well report
One email with the numbers above, what they mean for a home in Elmore County, exactly which tests to order, and what treatment fits the local profile. No spam, unsubscribe in one click.
What this means
The contaminants most often above their limit here are total coliform (18% of 73 samples), arsenic (17% of 272 samples), and nitrate (9% of 358 samples). A well next door can differ sharply from yours because bedrock fractures, well depth and plumbing all matter, so these rates describe the area, not your tap.
Chloride is widespread in local groundwater. It is mainly a staining and taste problem, but high manganese also carries a health advisory for infants.
What to test for in Elmore County
- Total coliform18% of 73 local samples were above the limit.
- Arsenic17% of 272 local samples were above the limit.
- Nitrate9% of 358 local samples were above the limit.
- Uranium1% of 85 local samples were above the limit.
- Fluoride1% of 275 local samples were above the limit.
- E. coli<1% of 381 local samples were above the limit.
- RadonMedian local reading is 480 pCi/L.
Treatment that fits the local profile
- Total coliform
- Inspect and repair the well cap and casing, then shock chlorinate and retest; UV disinfection whole-house; Chlorination system
- Arsenic
- Point-of-use reverse osmosis; Adsorptive media (iron-based) whole-house; Anion exchange
- Nitrate
- Point-of-use reverse osmosis; Anion exchange; Distillation
- Uranium
- Point-of-use reverse osmosis; Anion exchange; Whole-house anion exchange
- Fluoride
- Point-of-use reverse osmosis; Activated alumina; Distillation
Get your Elmore County water tested at home
A licensed local water treatment company tests your tap water in your home, walks you through the numbers, and quotes treatment only if something needs fixing. Free, about 30 minutes, no obligation. Tell us what you need and we match you with a company that serves Elmore County.
Common questions
Is there arsenic in well water in Elmore County?
Arsenic was detected in 87% of 272 public well samples in Elmore County, and 17% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.
How high is radon in well water in Elmore County?
The median radon level across 33 public samples in Elmore County was 480 pCi/L, with a high of 1,900 pCi/L. New Hampshire recommends treatment above 2,000 pCi/L.
How often should I test a private well in Elmore County?
Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.
Sources
- Idaho statewide ground water quality monitoring (IDWR EDMS): 2,780 samples in Elmore County. Ground water quality results from the Idaho Department of Water Resources statewide monitoring program and partner agencies (ISDA, IDEQ, INL), EDMS bulk download. Retrieved September 9, 2026.
- USGS Water Quality Portal: 301 samples in Elmore County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.