Lead in Washington well water
In Washington, 3% of 4,270 tested private well samples exceeded the EPA limit for lead (15 ug/L).
Lead in well water almost always comes from household plumbing and older fixtures, not the aquifer, and corrosive (low pH) well water makes it worse. There is no safe level for children; it harms brain development.
Check your lead number
Type the value from your lab report. It is compared to the EPA limit, the same way the full interpretation does it.
Test your Washington well for lead
Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.
Order the Tap Score well water test kit, from $209Already tested? Upload the report
Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says.
Systems that remove lead
Some links below are affiliate links. If you buy through one, the merchant pays us a commission at no extra cost to you. It does not change which products we list or what the data says.
Some links below are affiliate links. If you buy through one, the merchant pays us a commission at no extra cost to you. It does not change which products we list or what the data says.
For lead
Under-sink reverse osmosis system
under-sink or countertop, about $300
Look for NSF/ANSI 58 certification listing the contaminant you need removed.
For lead
Acid neutralizing filter
whole-house, at the point of entry, about $1,200
Raises pH so plumbing stops leaching lead and copper.
For lead
Aquasana SmartFlow reverse osmosis
under-sink or countertop, about $225
Certified to NSF/ANSI 58 and 53 to reduce arsenic (96%, pentavalent), fluoride (90%), lead (99%), nitrate, nitrite and PFOA/PFOS at the kitchen tap, with a remineralizer.
Rather have it installed and sized for your well? Book a free in-home water test with a licensed local company.
Where to get a well tested for lead in Washington: certified labs, state programs and prices.
By county, from individual samples
Public monitoring samples against the EPA limit (15 ug/L); counties with at least 30 samples.
| County | Above EPA limit | Samples | Detected | Median | Highest |
|---|---|---|---|---|---|
| Kitsap | 115 | 23% | 0 | 60 ug/L | |
| Stevens | 1,141 | 94% | 0.9 | 770 ug/L | |
| Whatcom | 88 | 42% | 0 | 142 ug/L | |
| Yakima | 85 | 54% | 0 | 200 ug/L | |
| Adams | 51 | 43% | 0 | 100 ug/L | |
| Clark | 663 | 95% | 0.71 | 42 ug/L | |
| King | 239 | 23% | 0 | 70 ug/L | |
| Cowlitz | 69 | 81% | 0 | 0 ug/L | |
| Whitman | 34 | 65% | 0.058 | 1.78 ug/L | |
| Grant | 154 | 50% | 0 | 1.96 ug/L | |
| Franklin | 105 | 50% | 0 | 1.45 ug/L | |
| Thurston | 178 | 38% | 0 | 5 ug/L | |
| Benton | 53 | 38% | 0 | 0.4 ug/L | |
| Pierce | 233 | 29% | 0 | 2 ug/L | |
| Spokane | 232 | 28% | 0 | 4.22 ug/L |
- Poulsbo CCD, Kitsap County19% of 54
- Spokane Reservation CCD, Stevens County10% of 1,122
- Yakima CCD, Yakima County8% of 52
- Bremerton CCD, Kitsap County4% of 46
- Seattle CCD, King County3% of 31
- Vancouver CCD, Clark County<1% of 641
- Seattle East CCD, King County0% of 63
- Connell CCD, Franklin County0% of 44
- Mattawa-Royal City CCD, Grant County0% of 54
- Olympia CCD, Thurston County0% of 127
- Othello CCD, Adams County0% of 32
- Hanford Site CCD, Benton County0% of 38
- Pasco North CCD, Franklin County0% of 50
- Tacoma CCD, Pierce County0% of 95
- Spokane CCD, Spokane County0% of 96
- Puyallup CCD, Pierce County0% of 30
- Liberty Lake CCD, Spokane County0% of 122
- Colville Reservation CCD, Okanogan County0% of 371
- Colville Reservation CCD, Ferry County0% of 125
- Fort Lewis-DuPont CCD, Pierce County0% of 82
Sources
- Individual samples from the USGS Water Quality Portal and state monitoring, summarized per geography. lead counts and shares are listed on each county and town page with their sources.