Well water in Sabine County, Texas
In Sabine County, chloride was detected in 100% of 88 tested well samples from Texas Water Development Board Groundwater Database and USGS Water Quality Portal.
88 individual samples from 78 wells, 1942 to 2004. Data refreshed September 9, 2026.
TWDB samples an ambient monitoring network of wells on a rotation, so these describe aquifers, not a survey of homeowners' tests.
What individual samples found
Each row summarizes every public sample for that contaminant inside Sabine County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.
| Contaminant | Samples | Detected | Above limit | Median | Highest | Limit | |
|---|---|---|---|---|---|---|---|
| Fluoride 1942 to 2002 | 15 | 100% | 0% | 0.28 | 1.7 | 4 mg/L EPA limit | |
| Chloride 1942 to 2002 | 88 | 100% | no limit | 38 | 640 | 250 mg/L nuisance level | |
| Iron 1961 to 2002 | 30 | 83% | no limit | 100 | 2,600 | 300 ug/L nuisance level | |
| Sodium 1942 to 2002 | 19 | 100% | no limit | 209 | 451 | 20 mg/L health guideline |
Sampled fewer than 10 times, too few to summarize: Gross alpha (1), Nitrate (3), Lead (3), Arsenic (3), Copper (3), Radium (226 + 228) (2), E. coli (1), Uranium (1), Manganese (4), Radon (1).
Get the free Sabine County well report
One email with the numbers above, what they mean for a home in Sabine County, exactly which tests to order, and what treatment fits the local profile. No spam, unsubscribe in one click.
What this means
Among contaminants with a federal limit, no tested sample in Sabine County came back above it. That is reassuring, but sampling is uneven: wells that were never tested are not in this data.
Chloride, Iron, and Manganese are widespread in local groundwater. They are mainly a staining and taste problem, but high manganese also carries a health advisory for infants.
What to test for in Sabine County
- Volatile organic compounds (VOCs)24 leaking underground storage tank sites on record locally.
- Coliform bacteriaRecommended for every private well, every year.
- RadonMedian local reading is 100 pCi/L.
- Gross alphaAbove the limit in 1 of 1 local samples; too few to quote a rate.
- NitrateAbove the limit in 1 of 3 local samples; too few to quote a rate.
- FluorideDetected in 100% of local samples.
- CopperDetected in 100% of local samples.
- ChlorideDetected in 100% of local samples.
Contamination sources on record in Sabine County
TCEQ records 24 leaking underground storage tank sites in Sabine County, among 35 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.
- 24
- leaking underground storage tank sitesGasoline and heating oil that leaked from tanks move through groundwater as benzene, MTBE and other volatile organic compounds.
- 11
- lined landfills and transfer facilities
Treatment that fits the local profile
- Fluoride
- Point-of-use reverse osmosis; Activated alumina; Distillation
- Copper
- Neutralizing filter to raise pH; Point-of-use reverse osmosis
- Chloride
- Point-of-use reverse osmosis; Distillation
- Iron
- Oxidizing filter whole-house; Water softener (low levels); Aeration plus filtration
- Manganese
- Oxidizing filter (greensand, birm) whole-house; Water softener (low levels); Point-of-use reverse osmosis
Get your Sabine County water tested at home
A licensed local water treatment company tests your tap water in your home, walks you through the numbers, and quotes treatment only if something needs fixing. Free, about 30 minutes, no obligation. Tell us what you need and we match you with a company that serves Sabine County.
Common questions
Is there arsenic in well water in Sabine County?
Arsenic was detected in 33% of 3 public well samples in Sabine County, and 0% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.
How high is radon in well water in Sabine County?
The median radon level across 1 public samples in Sabine County was 100 pCi/L, with a high of 100 pCi/L. New Hampshire recommends treatment above 2,000 pCi/L.
How often should I test a private well in Sabine County?
Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.
Sources
- Texas Water Development Board Groundwater Database: 168 samples in Sabine County. Water quality samples from the Texas Water Development Board Groundwater Database, collected by TWDB, groundwater conservation districts and cooperators. Retrieved September 9, 2026.
- USGS Water Quality Portal: 6 samples in Sabine County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
- TCEQ regulated sites: 35 regulated sites located in Sabine County. Leaking petroleum storage tank sites, state Superfund sites and municipal solid waste landfills from the Texas Commission on Environmental Quality. Retrieved September 9, 2026.
Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.