Well Water Nerd

Well water in Coleman County, Texas

In Coleman County, none of 134 tested well samples exceeded the EPA limit for fluoride, based on public data from Texas Water Development Board Groundwater Database.

134 individual samples from 100 wells, 1962 to 1982. Data refreshed September 9, 2026.

TWDB samples an ambient monitoring network of wells on a rotation, so these describe aquifers, not a survey of homeowners' tests.

What individual samples found

Each row summarizes every public sample for that contaminant inside Coleman County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.

ContaminantSamplesDetectedAbove limitMedianHighestLimit
Fluoride
1962 to 1982
134100%0%0.83.74 mg/L
EPA limit
Chloride
1962 to 1982
134100%no limit943,760250 mg/L
nuisance level
Sodium
1962 to 1982
134100%no limit88.51,58020 mg/L
health guideline

Sampled fewer than 10 times, too few to summarize: Iron (1).

Get the free Coleman County well report

One email with the numbers above, what they mean for a home in Coleman County, exactly which tests to order, and what treatment fits the local profile. No spam, unsubscribe in one click.

What this means

Among contaminants with a federal limit, no tested sample in Coleman County came back above it. That is reassuring, but sampling is uneven: wells that were never tested are not in this data.

Chloride and Iron are widespread in local groundwater. They are mainly a staining and taste problem, but high manganese also carries a health advisory for infants.

What to test for in Coleman County

  • Volatile organic compounds (VOCs)28 leaking underground storage tank sites on record locally.
  • Coliform bacteriaRecommended for every private well, every year.
  • FluorideDetected in 100% of local samples.
  • ChlorideDetected in 100% of local samples.
  • IronDetected in 100% of local samples.
  • NitrateRecommended for every private well, especially near farms or septic systems.

Contamination sources on record in Coleman County

TCEQ records 28 leaking underground storage tank sites in Coleman County, among 38 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.

28
leaking underground storage tank sitesGasoline and heating oil that leaked from tanks move through groundwater as benzene, MTBE and other volatile organic compounds.
10
lined landfills and transfer facilities

Treatment that fits the local profile

Fluoride
Point-of-use reverse osmosis; Activated alumina; Distillation
Chloride
Point-of-use reverse osmosis; Distillation
Iron
Oxidizing filter whole-house; Water softener (low levels); Aeration plus filtration

Get your Coleman County water tested at home

A licensed local water treatment company tests your tap water in your home, walks you through the numbers, and quotes treatment only if something needs fixing. Free, about 30 minutes, no obligation. Tell us what you need and we match you with a company that serves Coleman County.

What are you worried about?

The test is free and there is no obligation. Your details go only to the company named above, and we log the time and address of this request.

Common questions

How often should I test a private well in Coleman County?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Sources

  • Texas Water Development Board Groundwater Database: 403 samples in Coleman County. Water quality samples from the Texas Water Development Board Groundwater Database, collected by TWDB, groundwater conservation districts and cooperators. Retrieved September 9, 2026.
  • TCEQ regulated sites: 38 regulated sites located in Coleman County. Leaking petroleum storage tank sites, state Superfund sites and municipal solid waste landfills from the Texas Commission on Environmental Quality. Retrieved September 9, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.