Well Water Nerd

Well water in Blooming Grove township, Pennsylvania

In Blooming Grove township, none of 41 tested well samples exceeded the EPA limit for nitrate, based on public data from USGS Water Quality Portal.

The strongest signal is coliform bacteria: Recommended for every private well, every year, too few samples to carry the headline but first on the test list below.

254 test results across 13 contaminants from at least 11 wells, 1970 to 2015; nitrate has the most at 41. Data refreshed September 3, 2026.

Compiled by Nick at Well Water Nerd from public records. How these pages are built

What individual samples found

Each row summarizes every public sample for that contaminant inside Blooming Grove township. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.

ContaminantAbove limitSamplesDetectedMedianHighestLimit
Nitrate
1970 to 2015
4137%03.1610 mg/L
EPA limit
Fluoride
1970 to 2015
2190%0.110.374 mg/L
EPA limit
Arsenic
2006 to 2015
1968%0.7210 ug/L
EPA limit
Copper
1982 to 2015
1953%00.0241.3 mg/L
EPA limit
Lead
1982 to 2015
1942%03.6715 ug/L
EPA limit
Uranium
2007 to 2015
1889%0.0460.3930 ug/L
EPA limit
E. coli
2015
140%000 MPN/100mL
EPA limit
Chloride
1970 to 2015
no limit2190%5.4248250 mg/L
nuisance level
Manganese
1970 to 2015
no limit2190%19.4446300 ug/L
health guideline
Iron
1970 to 2015
no limit2190%376,170300 ug/L
nuisance level
Sodium
1982 to 2015
no limit20100%8.7940.820 mg/L
health guideline
Radon
2007 to 2015
no limit18100%1,0603,4102,000 pCi/L
health guideline

Sampled fewer than 10 times, too few to summarize: Radium (226 + 228) (2).

Closer than the town

See the sampled wells near your address

The same records, drawn around one point: which wells within a few miles were sampled and what they found, how deep the wells next to you were drilled, and any leaking tank or cleanup site within a mile.

Check my address

What this means

Among contaminants with a federal limit, no tested sample in Blooming Grove township came back above it. That is reassuring, but sampling is uneven: wells that were never tested are not in this data.

Chloride, Manganese, and Iron are widespread in local groundwater. They are mainly a staining and taste problem, but high manganese also carries a health advisory for infants.

What to test for in Blooming Grove township

  1. 1
    Coliform bacteria
    Recommended for every private well, every year.
  2. 2
    Radon
    Median local reading is 1,060 pCi/L.
  3. 3
    Nitrate
    Recommended for every private well, especially near farms or septic systems.
  4. 4
    Fluoride
    Detected in 90% of local samples.
  5. 5
    Chloride
    Detected in 90% of local samples.
  6. 6
    Manganese
    Detected in 90% of local samples.
  7. 7
    Iron
    Detected in 90% of local samples.

Test your Blooming Grove township well for coliform bacteria, radon and nitrate

Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.

Order the Tap Score well water test kit, from $209Already tested? Upload the report

Just want bacteria checked first? Tap Score coliform and E. coli test, $99. Coliform and E. coli are the tests every well needs every year.

Want a quick look before paying for a lab? Home well water test strips on Amazon check hardness, iron, pH and nitrate in minutes. They are a screen, not a result: arsenic, bacteria, uranium and PFAS need a certified lab.

Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says. As an Amazon Associate we earn from qualifying purchases.

Where to get a well tested in Pennsylvania: certified labs, state programs and prices.

Already have results back? Get your lab report read against the Blooming Grove township numbers, $29. Every line explained, ranked by what matters, with the fix for each.

Wells in Blooming Grove township

88 domestic wells in Blooming Grove township are on record with the state. 100% are drilled into bedrock, and the typical well is 245 feet deep (one in ten goes past 460 feet).

In a typical Blooming Grove township well, bedrock starts about 30 feet down, the median yield is 15 gallons per minute, 4% of wells yield under 3 gallons per minute and usually need a storage tank.

Bedrock wells are where arsenic, uranium and radon come from: the water sits in fractures in granite and metamorphic rock and picks up whatever the rock carries. That is why testing for those three matters more here than in a dug or gravel well.

Find your own well's report

The state keeps the driller's report for most wells drilled since 1984. It tells you how deep your well is, where bedrock starts, and how much water it makes, which decides what treatment can work.

  1. Open PaGWIS (Pennsylvania Geological Survey) and choose Water Well.
  2. The record lists depth, depth to bedrock, yield and use; drillers have reported new wells to the state since 1966.

Pennsylvania has no private well construction standard and does not require testing, so many older wells have no record at all.

The rock under Blooming Grove township

Not a principal aquifer

The USGS map places this area outside any principal aquifer, which usually means wells here draw from fractured bedrock or thin local deposits rather than a large regional aquifer. Bedrock wells of that kind are where arsenic, radon and uranium turn up, and yields vary from well to well.

Classification from the USGS Principal Aquifers of the United States (national map, 2003 edition, GIS release 2015), read at the town centroid. A single well can sit in a different unit, especially near a boundary.

Official help in Pennsylvania

Two places to start that are not selling anything: the state program that answers private well questions, and its list of labs certified to run drinking water tests. A certified lab is the difference between a result you can act on and a number.

Treatment that fits the local profile

Manganese

Oxidizing filter (greensand, birm) whole-house; Water softener (low levels); Point-of-use reverse osmosis

Iron

Oxidizing filter whole-house; Water softener (low levels); Aeration plus filtration

Systems we would look at first

Some links below are affiliate links. If you buy through one, the merchant pays us a commission at no extra cost to you. It does not change which products we list or what the data says.

For manganese

Iron and manganese oxidizing filter

whole-house, at the point of entry, about $1,800

Air-injection or greensand media; fixes staining at the source.

Free, no obligation

Get on the list for a free in-home water test in Blooming Grove township

No water treatment company serves Blooming Grove township through Well Water Nerd yet. We are signing licensed companies on county by county: they test at your tap for free, walk you through the numbers, and quote treatment only if something needs fixing. Leave your details and you are first in line. Nothing is shared until a company joins for Blooming Grove township, and you get an email naming it first.

What are you worried about?

The test is free and there is no obligation. No company is named yet; your details stay with us until one joins for your area, and we log the time and address of this request.

Common questions

How deep are wells in Blooming Grove township?

The typical domestic well in Blooming Grove township is 245 feet deep, based on 88 wells reported to the state. One in ten is deeper than 460 feet. 100% are drilled into bedrock.

Is there arsenic in well water in Blooming Grove township?

Arsenic was detected in 68% of 19 public well samples in Blooming Grove township, and 0% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.

How high is radon in well water in Blooming Grove township?

The median radon level across 18 public samples in Blooming Grove township was 1,060 pCi/L, with a high of 3,410 pCi/L. New Hampshire recommends treatment above 2,000 pCi/L.

How often should I test a private well in Blooming Grove township?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Towns near Blooming Grove township

Closest first. Groundwater does not stop at a line on a map, so the next town over is a fair second opinion.

Want the numbers themselves? Download the Pennsylvania dataset as CSV, every county and town, with the sources named.

Sources

  • USGS Water Quality Portal: 254 samples in Blooming Grove township. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
  • Pennsylvania Groundwater Information System (PaGWIS) wells: 132 well records in Blooming Grove township, 88 domestic. Water well records from the Pennsylvania Groundwater Information System, Pennsylvania Geological Survey (DCNR). Only aggregates are shown; owner names and addresses are never stored. Retrieved September 16, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.