Well Water Nerd

Well water in Charlestown township, Pennsylvania

1in2

Testing strongly recommended

tested well samples in Charlestown township exceeded the EPA limit for radium (226 + 228) (5 pCi/L), based on public data from USGS Water Quality Portal.

600 test results across 12 contaminants from at least 40 wells, 1949 to 2003; nitrate has the most at 137. Data refreshed September 3, 2026.

Compiled by Nick at Well Water Nerd from public records. How these pages are built

What individual samples found

Each row summarizes every public sample for that contaminant inside Charlestown township. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.

ContaminantAbove limitSamplesDetectedMedianHighestLimit
Radium (226 + 228)
1985 to 1999
4785%5.41505 pCi/L
EPA limit
Nitrate
1949 to 2003
13798%2.616.410 mg/L
EPA limit
Fluoride
1949 to 2003
4973%0.10.44 mg/L
EPA limit
Uranium
1986 to 1999
2348%06.630 ug/L
EPA limit
Lead
1974 to 2003
1471%03.4815 ug/L
EPA limit
Copper
1974 to 1999
1164%0.020.2211.3 mg/L
EPA limit
Arsenic
1974 to 2003
1070%1310 ug/L
EPA limit
Chloride
1949 to 2003
no limit90100%80.52,100250 mg/L
nuisance level
Radon
1986 to 2003
no limit74100%3,6907,9002,000 pCi/L
health guideline
Iron
1949 to 2003
no limit4986%4046,000300 ug/L
nuisance level
Manganese
1966 to 2003
no limit4896%621,500300 ug/L
health guideline
Sodium
1949 to 2003
no limit48100%129020 mg/L
health guideline

Closer than the town

See the sampled wells near your address

The same records, drawn around one point: which wells within a few miles were sampled and what they found, how deep the wells next to you were drilled, and any leaking tank or cleanup site within a mile.

Check my address

What this means

The contaminants most often above their limit here are radium (226 + 228) (53% of 47 samples) and nitrate (15% of 137 samples). A well next door can differ sharply from yours because bedrock fractures, well depth and plumbing all matter, so these rates describe the area, not your tap.

Chloride, Iron, and Manganese are widespread in local groundwater. They are mainly a staining and taste problem, but high manganese also carries a health advisory for infants.

The median radon reading (3,690 pCi/L) is above the 2,000 pCi/L level at which treatment is recommended. Radon in water raises indoor air radon when it is used for showers and laundry.

What to test for in Charlestown township

  1. 1
    Radium (226 + 228)
    53% of 47 local samples were above the limit.
  2. 2
    Nitrate
    15% of 137 local samples were above the limit.
  3. 3
    Coliform bacteria
    Recommended for every private well, every year.
  4. 4
    Radon
    Median local reading is 3,690 pCi/L.
  5. 5
    Chloride
    Detected in 100% of local samples.
  6. 6
    Manganese
    Detected in 96% of local samples.
  7. 7
    Iron
    Detected in 86% of local samples.

Test your Charlestown township well for radium (226 + 228), nitrate and coliform bacteria

Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.

Order the Tap Score well water test kit, from $209Already tested? Upload the report

Just want bacteria checked first? Tap Score coliform and E. coli test, $99. Coliform and E. coli are the tests every well needs every year.

Want a quick look before paying for a lab? Home well water test strips on Amazon check hardness, iron, pH and nitrate in minutes. They are a screen, not a result: arsenic, bacteria, uranium and PFAS need a certified lab.

Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says. As an Amazon Associate we earn from qualifying purchases.

Where to get a well tested in Pennsylvania: certified labs, state programs and prices.

Already have results back? Get your lab report read against the Charlestown township numbers, $29. Every line explained, ranked by what matters, with the fix for each.

Wells in Charlestown township

299 domestic wells in Charlestown township are on record with the state. 100% are drilled into bedrock, and the typical well is 194 feet deep (one in ten goes past 500 feet).

In a typical Charlestown township well, bedrock starts about 30 feet down, the median yield is 7 gallons per minute, 19% of wells yield under 3 gallons per minute and usually need a storage tank.

Bedrock wells are where arsenic, uranium and radon come from: the water sits in fractures in granite and metamorphic rock and picks up whatever the rock carries. That is why testing for those three matters more here than in a dug or gravel well.

Find your own well's report

The state keeps the driller's report for most wells drilled since 1984. It tells you how deep your well is, where bedrock starts, and how much water it makes, which decides what treatment can work.

  1. Open PaGWIS (Pennsylvania Geological Survey) and choose Water Well.
  2. The record lists depth, depth to bedrock, yield and use; drillers have reported new wells to the state since 1966.

Pennsylvania has no private well construction standard and does not require testing, so many older wells have no record at all.

The rock under Charlestown township

Piedmont and Blue Ridge crystalline-rock aquifers

Igneous and metamorphic-rock. Granite and similar crystalline rock hold water only in fractures. Wells are deep and yields modest, and the rock itself is the source of arsenic, radon and uranium, which is why those three head the test list in bedrock country.

Classification from the USGS Principal Aquifers of the United States (national map, 2003 edition, GIS release 2015), read at the town centroid. A single well can sit in a different unit, especially near a boundary.

Official help in Pennsylvania

Two places to start that are not selling anything: the state program that answers private well questions, and its list of labs certified to run drinking water tests. A certified lab is the difference between a result you can act on and a number.

Treatment that fits the local profile

Radium (226 + 228)

Water softener (cation exchange); Point-of-use reverse osmosis

Nitrate

Point-of-use reverse osmosis; Anion exchange; Distillation

Radon

Aeration (bubble-up or diffused) whole-house; Granular activated carbon whole-house (lower levels only)

Manganese

Oxidizing filter (greensand, birm) whole-house; Water softener (low levels); Point-of-use reverse osmosis

Iron

Oxidizing filter whole-house; Water softener (low levels); Aeration plus filtration

Systems we would look at first

Some links below are affiliate links. If you buy through one, the merchant pays us a commission at no extra cost to you. It does not change which products we list or what the data says.

For radium (226 + 228)

Under-sink reverse osmosis system

under-sink or countertop, about $300

Look for NSF/ANSI 58 certification listing the contaminant you need removed.

For nitrate

Aquasana SmartFlow reverse osmosis

under-sink or countertop, about $225

Certified to NSF/ANSI 58 and 53 to reduce arsenic (96%, pentavalent), fluoride (90%), lead (99%), nitrate, nitrite and PFOA/PFOS at the kitchen tap, with a remineralizer.

For iron

Iron and manganese oxidizing filter

whole-house, at the point of entry, about $1,800

Air-injection or greensand media; fixes staining at the source.

Free, no obligation

Get on the list for a free in-home water test in Charlestown township

No water treatment company serves Charlestown township through Well Water Nerd yet. We are signing licensed companies on county by county: they test at your tap for free, walk you through the numbers, and quote treatment only if something needs fixing. Leave your details and you are first in line. Nothing is shared until a company joins for Charlestown township, and you get an email naming it first.

What are you worried about?

The test is free and there is no obligation. No company is named yet; your details stay with us until one joins for your area, and we log the time and address of this request.

Common questions

How deep are wells in Charlestown township?

The typical domestic well in Charlestown township is 194 feet deep, based on 299 wells reported to the state. One in ten is deeper than 500 feet. 100% are drilled into bedrock.

Is there arsenic in well water in Charlestown township?

Arsenic was detected in 70% of 10 public well samples in Charlestown township, and 0% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.

How high is radon in well water in Charlestown township?

The median radon level across 74 public samples in Charlestown township was 3,690 pCi/L, with a high of 7,900 pCi/L. New Hampshire recommends treatment above 2,000 pCi/L.

How often should I test a private well in Charlestown township?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Towns near Charlestown township

Closest first. Groundwater does not stop at a line on a map, so the next town over is a fair second opinion.

Want the numbers themselves? Download the Pennsylvania dataset as CSV, every county and town, with the sources named.

Sources

  • USGS Water Quality Portal: 600 samples in Charlestown township. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
  • Pennsylvania Groundwater Information System (PaGWIS) wells: 472 well records in Charlestown township, 299 domestic. Water well records from the Pennsylvania Groundwater Information System, Pennsylvania Geological Survey (DCNR). Only aggregates are shown; owner names and addresses are never stored. Retrieved September 16, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.