Well water in Menallen township, Pennsylvania
1in8
Testing recommended
tested well samples in Menallen township exceeded the EPA limit for nitrate (10 mg/L), based on public data from USGS Water Quality Portal.
53 test results across 11 contaminants from at least 9 wells, 1981 to 2021; nitrate has the most at 30. Data refreshed September 3, 2026.
Compiled by Nick at Well Water Nerd from public records. How these pages are built
What individual samples found
Each row summarizes every public sample for that contaminant inside Menallen township. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.
| Contaminant | Above limit | Samples | Detected | Median | Highest | Limit |
|---|---|---|---|---|---|---|
| Nitrate 2003 to 2021 | 30 | 100% | 2.94 | 24.3 | 10 mg/L EPA limit |
Sampled fewer than 10 times, too few to summarize: E. coli (9), Arsenic (2), Lead (2), Copper (1), Uranium (1), Fluoride (1), Iron (2), Manganese (2), Sodium (2), Radon (1).
Over time
Share of samples above the limit by period. A cell needs ten samples to show; a comparison needs twenty in each period. Later periods sample fewer wells, and often the ones already known to have a problem.
| Contaminant | before 2000 | 2000s | 2010s | 2020s |
|---|---|---|---|---|
| Nitrate | n/a | 6%16 samples | 25%12 samples | n/a |
Closer than the town
See the sampled wells near your address
The same records, drawn around one point: which wells within a few miles were sampled and what they found, how deep the wells next to you were drilled, and any leaking tank or cleanup site within a mile.
Check my addressWhat this means
The contaminants most often above their limit here are nitrate (13% of 30 samples). A well next door can differ sharply from yours because bedrock fractures, well depth and plumbing all matter, so these rates describe the area, not your tap.
What to test for in Menallen township
- 1Nitrate13% of 30 local samples were above the limit.
- 2Coliform bacteriaRecommended for every private well, every year.
- 3RadonMedian local reading is 580 pCi/L.
- 4CopperDetected in 100% of local samples.
- 5FluorideDetected in 100% of local samples.
Test your Menallen township well for nitrate, coliform bacteria and radon
Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.
Order the Tap Score well water test kit, from $209Already tested? Upload the report
Just want bacteria checked first? Tap Score coliform and E. coli test, $99. Coliform and E. coli are the tests every well needs every year.
Want a quick look before paying for a lab? Home well water test strips on Amazon check hardness, iron, pH and nitrate in minutes. They are a screen, not a result: arsenic, bacteria, uranium and PFAS need a certified lab.
Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says. As an Amazon Associate we earn from qualifying purchases.
Where to get a well tested in Pennsylvania: certified labs, state programs and prices.
Already have results back? Get your lab report read against the Menallen township numbers, $29. Every line explained, ranked by what matters, with the fix for each.
Wells in Menallen township
271 domestic wells in Menallen township are on record with the state. 100% are drilled into bedrock, and the typical well is 180 feet deep (one in ten goes past 400 feet).
In a typical Menallen township well, bedrock starts about 36 feet down, the median yield is 9 gallons per minute, 12% of wells yield under 3 gallons per minute and usually need a storage tank.
Bedrock wells are where arsenic, uranium and radon come from: the water sits in fractures in granite and metamorphic rock and picks up whatever the rock carries. That is why testing for those three matters more here than in a dug or gravel well.
Find your own well's report
The state keeps the driller's report for most wells drilled since 1984. It tells you how deep your well is, where bedrock starts, and how much water it makes, which decides what treatment can work.
- Open PaGWIS (Pennsylvania Geological Survey) and choose Water Well.
- The record lists depth, depth to bedrock, yield and use; drillers have reported new wells to the state since 1966.
Pennsylvania has no private well construction standard and does not require testing, so many older wells have no record at all.
The rock under Menallen township
Piedmont and Blue Ridge crystalline-rock aquifers
Igneous and metamorphic-rock. Granite and similar crystalline rock hold water only in fractures. Wells are deep and yields modest, and the rock itself is the source of arsenic, radon and uranium, which is why those three head the test list in bedrock country.
Classification from the USGS Principal Aquifers of the United States (national map, 2003 edition, GIS release 2015), read at the town centroid. A single well can sit in a different unit, especially near a boundary.
Official help in Pennsylvania
Two places to start that are not selling anything: the state program that answers private well questions, and its list of labs certified to run drinking water tests. A certified lab is the difference between a result you can act on and a number.
- Private Wells, PA DEP
- Laboratory Accreditation Program, PA DEP
Treatment that fits the local profile
Nitrate
Point-of-use reverse osmosis; Anion exchange; Distillation
Iron
Oxidizing filter whole-house; Water softener (low levels); Aeration plus filtration
Systems we would look at first
Some links below are affiliate links. If you buy through one, the merchant pays us a commission at no extra cost to you. It does not change which products we list or what the data says.
For nitrate
Under-sink reverse osmosis system
under-sink or countertop, about $300
Look for NSF/ANSI 58 certification listing the contaminant you need removed.
For nitrate
Aquasana SmartFlow reverse osmosis
under-sink or countertop, about $225
Certified to NSF/ANSI 58 and 53 to reduce arsenic (96%, pentavalent), fluoride (90%), lead (99%), nitrate, nitrite and PFOA/PFOS at the kitchen tap, with a remineralizer.
For iron
Iron and manganese oxidizing filter
whole-house, at the point of entry, about $1,800
Air-injection or greensand media; fixes staining at the source.
Free, no obligation
Get on the list for a free in-home water test in Menallen township
No water treatment company serves Menallen township through Well Water Nerd yet. We are signing licensed companies on county by county: they test at your tap for free, walk you through the numbers, and quote treatment only if something needs fixing. Leave your details and you are first in line. Nothing is shared until a company joins for Menallen township, and you get an email naming it first.
Common questions
How deep are wells in Menallen township?
The typical domestic well in Menallen township is 180 feet deep, based on 271 wells reported to the state. One in ten is deeper than 400 feet. 100% are drilled into bedrock.
How often should I test a private well in Menallen township?
Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.
Towns near Menallen township
Closest first. Groundwater does not stop at a line on a map, so the next town over is a fair second opinion.
Want the numbers themselves? Download the Pennsylvania dataset as CSV, every county and town, with the sources named.
Sources
- USGS Water Quality Portal: 53 samples in Menallen township. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
- Pennsylvania Groundwater Information System (PaGWIS) wells: 374 well records in Menallen township, 271 domestic. Water well records from the Pennsylvania Groundwater Information System, Pennsylvania Geological Survey (DCNR). Only aggregates are shown; owner names and addresses are never stored. Retrieved September 16, 2026.
Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.