Well Water Nerd

Well water in Jackson County, Oregon

1in7

Testing recommended

tested well samples in Jackson County exceeded the EPA limit for arsenic (10 ug/L), based on public data from USGS Water Quality Portal.

2,374 test results across 11 contaminants from at least 384 wells, 1934 to 2026; chloride has the most at 507. Data refreshed September 15, 2026.

Compiled by Nick at Well Water Nerd from public records. How these pages are built

An estimated 51,001 people in Jackson County get their drinking water from a private well, per USGS 2015 county water use. That is about 24% of residents.

Separately, the USGS national arsenic model estimates that 4% of the 51,001 people on private wells in Jackson County draw water above 10 ug/L (the model's range is 3% to 5%), from geology and well depth rather than local tests.

What individual samples found

Each row summarizes every public sample for that contaminant inside Jackson County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.

ContaminantAbove limitSamplesDetectedMedianHighestLimit
Arsenic
1967 to 2026
12499%2.0645210 ug/L
EPA limit
Nitrate
1934 to 1980
15999%0.24310 mg/L
EPA limit
Fluoride
1934 to 2021
231100%0.212.64 mg/L
EPA limit
Uranium
2003 to 2026
156100%0.918.130 ug/L
EPA limit
Copper
1978 to 2026
9899%0.0050.081.3 mg/L
EPA limit
Lead
1979 to 2022
6198%0.53515 ug/L
EPA limit
Chloride
1934 to 2026
no limit507100%192,020250 mg/L
nuisance level
Sodium
1934 to 2026
no limit493100%41.91,80020 mg/L
health guideline
Iron
1945 to 2026
no limit29498%65.021,100300 ug/L
nuisance level
Manganese
1951 to 2026
no limit24396%279,950300 ug/L
health guideline

Sampled fewer than 10 times, too few to summarize: E. coli (8).

Over time

Share of samples above the limit by period. A cell needs ten samples to show; a comparison needs twenty in each period. Later periods sample fewer wells, and often the ones already known to have a problem.

Contaminantbefore 20002000s2010s2020s
Fluoride6%195 samplesn/a0%29 samplesn/a
Uraniumn/a0%20 samples0%112 samples0%24 samples
Arsenic13%38 samplesn/a18%51 samples10%29 samples
Copper0%31 samples0%13 samples0%45 samplesn/a
Lead0%10 samplesn/a0%43 samplesn/a

Fluoride above the limit in Jackson County fell from 6% of 195 samples before 2000 to 0% of 29 in the 2010s.

Arsenic above the limit in Jackson County fell from 18% of 51 samples in the 2010s to 10% of 29 in the 2020s.

Uranium, copper have held within a few points between the two most recent periods with enough samples.

Closer than the county

See the sampled wells near your address

The same records, drawn around one point: which wells within a few miles were sampled and what they found, how deep the wells next to you were drilled, and any leaking tank or cleanup site within a mile.

Check my address

What this means

The contaminants most often above their limit here are arsenic (14% of 124 samples), nitrate (8% of 159 samples), and fluoride (5% of 231 samples). A well next door can differ sharply from yours because bedrock fractures, well depth and plumbing all matter, so these rates describe the area, not your tap.

Chloride, Iron, and Manganese are widespread in local groundwater. They are mainly a staining and taste problem, but high manganese also carries a health advisory for infants.

What to test for in Jackson County

  1. 1
    Arsenic
    14% of 124 local samples were above the limit.
  2. 2
    Nitrate
    8% of 159 local samples were above the limit.
  3. 3
    Fluoride
    5% of 231 local samples were above the limit.
  4. 4
    E. coli
    Above the limit in 8 of 8 local samples; too few to quote a rate.
  5. 5
    Chloride
    Detected in 100% of local samples.
  6. 6
    Copper
    Detected in 99% of local samples.
  7. 7
    Iron
    Detected in 98% of local samples.

Test your Jackson County well for arsenic, nitrate and fluoride

Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.

Order the Tap Score well water test kit, from $209Already tested? Upload the report

Just want bacteria checked first? Tap Score coliform and E. coli test, $99. Coliform and E. coli are the tests every well needs every year.

Want a quick look before paying for a lab? Home well water test strips on Amazon check hardness, iron, pH and nitrate in minutes. They are a screen, not a result: arsenic, bacteria, uranium and PFAS need a certified lab.

Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says. As an Amazon Associate we earn from qualifying purchases.

Where to get a well tested in Oregon: certified labs, state programs and prices.

Already have results back? Get your lab report read against the Jackson County numbers, $29. Every line explained, ranked by what matters, with the fix for each.

The rock under Jackson County

Pacific Northwest basin-fill aquifers

Unconsolidated sand and gravel. Wells in sand and gravel are usually shallow and productive, and they recharge quickly from the surface. That makes them the most exposed to nitrate, bacteria and anything spilled nearby, and the least likely to carry arsenic or radon from the rock.

Classification from the USGS Principal Aquifers of the United States (national map, 2003 edition, GIS release 2015), read at the county centroid. A single well can sit in a different unit, especially near a boundary.

Official help in Oregon

Two places to start that are not selling anything: the state program that answers private well questions, and its list of labs certified to run drinking water tests. A certified lab is the difference between a result you can act on and a number.

Contamination sources on record in Jackson County

Oregon DEQ active tank sites records 73 regulated sites in Jackson County, among 73 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.

73
registered underground storage tank sitesRegistered tanks are regulated and inspected; they matter most when they are old or near a shallow well.

Treatment that fits the local profile

Arsenic

Point-of-use reverse osmosis; Adsorptive media (iron-based) whole-house; Anion exchange

Nitrate

Point-of-use reverse osmosis; Anion exchange; Distillation

Fluoride

Point-of-use reverse osmosis; Activated alumina; Distillation

Iron

Oxidizing filter whole-house; Water softener (low levels); Aeration plus filtration

Manganese

Oxidizing filter (greensand, birm) whole-house; Water softener (low levels); Point-of-use reverse osmosis

Systems we would look at first

Some links below are affiliate links. If you buy through one, the merchant pays us a commission at no extra cost to you. It does not change which products we list or what the data says.

For arsenic

Under-sink reverse osmosis system

under-sink or countertop, about $300

Look for NSF/ANSI 58 certification listing the contaminant you need removed.

For arsenic

Whole-house arsenic and uranium filter

whole-house, at the point of entry, about $2,500

Adsorptive iron-based media; sized to your well yield.

For arsenic

Aquasana SmartFlow reverse osmosis

under-sink or countertop, about $225

Certified to NSF/ANSI 58 and 53 to reduce arsenic (96%, pentavalent), fluoride (90%), lead (99%), nitrate, nitrite and PFOA/PFOS at the kitchen tap, with a remineralizer.

For iron

Iron and manganese oxidizing filter

whole-house, at the point of entry, about $1,800

Air-injection or greensand media; fixes staining at the source.

Free, no obligation

Get on the list for a free in-home water test in Jackson County

No water treatment company serves Jackson County through Well Water Nerd yet. We are signing licensed companies on county by county: they test at your tap for free, walk you through the numbers, and quote treatment only if something needs fixing. Leave your details and you are first in line. Nothing is shared until a company joins for Jackson County, and you get an email naming it first.

What are you worried about?

The test is free and there is no obligation. No company is named yet; your details stay with us until one joins for your area, and we log the time and address of this request.

Common questions

Is there arsenic in well water in Jackson County?

Arsenic was detected in 99% of 124 public well samples in Jackson County, and 14% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.

How often should I test a private well in Jackson County?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Counties near Jackson County

Closest first. Groundwater does not stop at a line on a map, so the next county over is a fair second opinion.

Want the numbers themselves? Download the Oregon dataset as CSV, every county and town, with the sources named.

Sources

  • USGS Water Quality Portal: 2,374 samples in Jackson County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
  • USGS national arsenic model (Ayotte 2017): estimated share of 51,001 people on private wells in Jackson County above 10 ug/L of arsenic, from geology, well depth and land use. County estimates of domestic well users with arsenic above 10 ug/L from the USGS national logistic regression model (Ayotte, Medalie and Qi, 2017), with private well population from the USGS 2015 county water-use compilation (Dieter and others, 2018). Retrieved September 15, 2026.
  • Oregon DEQ active tank sites: 73 regulated sites located in Jackson County. Active underground storage tank sites from the Oregon Department of Environmental Quality. Retrieved September 18, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.