Well Water Nerd

Well water in Licking County, Ohio

1in4

Testing strongly recommended

tested well samples in Licking County exceeded the EPA limit for arsenic (10 ug/L), based on public data from USGS Water Quality Portal.

725 test results across 11 contaminants from at least 29 wells, 1982 to 2014; sodium has the most at 87. Data refreshed September 15, 2026.

Compiled by Nick at Well Water Nerd from public records. How these pages are built

An estimated 70,582 people in Licking County get their drinking water from a private well, per USGS 2015 county water use. That is about 41% of residents.

Separately, the USGS national arsenic model estimates that 14% of the 70,582 people on private wells in Licking County draw water above 10 ug/L (the model's range is 7% to 26%), from geology and well depth rather than local tests.

What individual samples found

Each row summarizes every public sample for that contaminant inside Licking County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.

ContaminantAbove limitSamplesDetectedMedianHighestLimit
Arsenic
2012 to 2014
7093%5.866.110 ug/L
EPA limit
Fluoride
2006 to 2014
8461%0.3751.544 mg/L
EPA limit
Copper
1997 to 2014
7117%00.0081.3 mg/L
EPA limit
Lead
1997 to 2014
716%00.38315 ug/L
EPA limit
Nitrate
1991 to 2013
6010%00.2310 mg/L
EPA limit
E. coli
2006 to 2007
130%000 MPN/100mL
EPA limit
Sodium
1982 to 2014
no limit87100%15.656,00020 mg/L
health guideline
Manganese
1982 to 2014
no limit8795%13819,000300 ug/L
health guideline
Iron
1982 to 2014
no limit87100%1,790180,000300 ug/L
nuisance level
Chloride
1982 to 2014
no limit8695%28.6270,000250 mg/L
nuisance level

Sampled fewer than 10 times, too few to summarize: Uranium (9).

Over time

Share of samples above the limit by period. A cell needs ten samples to show; a comparison needs twenty in each period. Later periods sample fewer wells, and often the ones already known to have a problem.

Contaminantbefore 20002000s2010s2020s
Fluoriden/a0%14 samples0%70 samplesn/a
Nitraten/a0%28 samples0%24 samplesn/a

Nitrate has held within a few points between the two most recent periods with enough samples.

Closer than the county

See the sampled wells near your address

The same records, drawn around one point: which wells within a few miles were sampled and what they found, how deep the wells next to you were drilled, and any leaking tank or cleanup site within a mile.

Check my address

What this means

The contaminants most often above their limit here are arsenic (27% of 70 samples). A well next door can differ sharply from yours because bedrock fractures, well depth and plumbing all matter, so these rates describe the area, not your tap.

Manganese, Iron, and Chloride are widespread in local groundwater. They are mainly a staining and taste problem, but high manganese also carries a health advisory for infants.

What to test for in Licking County

  1. 1
    Arsenic
    27% of 70 local samples were above the limit.
  2. 2
    Coliform bacteria
    Recommended for every private well, every year.
  3. 3
    Nitrate
    Recommended for every private well, especially near farms or septic systems.
  4. 4
    Iron
    Detected in 100% of local samples.
  5. 5
    Manganese
    Detected in 95% of local samples.
  6. 6
    Chloride
    Detected in 95% of local samples.
  7. 7
    Fluoride
    Detected in 61% of local samples.
  8. 8
    Volatile organic compounds (VOCs)
    556 leaking underground storage tank sites on record locally.
  9. 9
    Metals panel
    45 hazardous waste sites on record locally.

Test your Licking County well for arsenic, coliform bacteria and nitrate

Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.

Order the Tap Score well water test kit, from $209Already tested? Upload the report

Just want bacteria checked first? Tap Score coliform and E. coli test, $99. Coliform and E. coli are the tests every well needs every year.

Want a quick look before paying for a lab? Home well water test strips on Amazon check hardness, iron, pH and nitrate in minutes. They are a screen, not a result: arsenic, bacteria, uranium and PFAS need a certified lab.

Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says. As an Amazon Associate we earn from qualifying purchases.

Where to get a well tested in Ohio: certified labs, state programs and prices.

Already have results back? Get your lab report read against the Licking County numbers, $29. Every line explained, ranked by what matters, with the fix for each.

Wells in Licking County

15,698 domestic wells in Licking County are on record with the state since 1970. 52% are drilled into bedrock, and the typical well is 140 feet deep (one in ten goes past 270 feet).

In a typical Licking County well, bedrock starts about 58 feet down, the median yield is 15 gallons per minute, 1% of wells yield under 3 gallons per minute and usually need a storage tank.

1,892
1970s
1,771
1980s
3,392
1990s
3,350
2000s
1,808
2010s
548
2020s

Find your own well's report

The state keeps the driller's report for most wells drilled since 1984. It tells you how deep your well is, where bedrock starts, and how much water it makes, which decides what treatment can work.

  1. Open ODNR water well log search and choose Water Well.
  2. The log lists depth, depth to bedrock, casing, static water level, the pump test and the driller.

Ohio has required well logs since 1948, so most drilled wells have one.

The rock under Licking County

Mississippian aquifers

Sandstone and carbonate-rock. Layered sandstone and limestone means a well may draw from either. Hardness and iron are routine, and the limestone layers can carry bacteria and nitrate from the surface quickly, so test for both yearly.

Classification from the USGS Principal Aquifers of the United States (national map, 2003 edition, GIS release 2015), read at the county centroid. A single well can sit in a different unit, especially near a boundary.

Official help in Ohio

Two places to start that are not selling anything: the state program that answers private well questions, and its list of labs certified to run drinking water tests. A certified lab is the difference between a result you can act on and a number.

Contamination sources on record in Licking County

Ohio EPA records 556 leaking underground storage tank sites and 45 hazardous waste sites in Licking County, among 622 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.

556
leaking underground storage tank sitesGasoline and heating oil that leaked from tanks move through groundwater as benzene, MTBE and other volatile organic compounds.
45
hazardous waste sitesSolvents, degreasers and metals from industrial sites can travel far in fractured bedrock.
8
lined landfills and transfer facilities
13
other remediation projects

Treatment that fits the local profile

Arsenic

Point-of-use reverse osmosis; Adsorptive media (iron-based) whole-house; Anion exchange

Iron

Oxidizing filter whole-house; Water softener (low levels); Aeration plus filtration

Manganese

Oxidizing filter (greensand, birm) whole-house; Water softener (low levels); Point-of-use reverse osmosis

Systems we would look at first

Some links below are affiliate links. If you buy through one, the merchant pays us a commission at no extra cost to you. It does not change which products we list or what the data says.

For arsenic

Under-sink reverse osmosis system

under-sink or countertop, about $300

Look for NSF/ANSI 58 certification listing the contaminant you need removed.

For arsenic

Whole-house arsenic and uranium filter

whole-house, at the point of entry, about $2,500

Adsorptive iron-based media; sized to your well yield.

For arsenic

Aquasana SmartFlow reverse osmosis

under-sink or countertop, about $225

Certified to NSF/ANSI 58 and 53 to reduce arsenic (96%, pentavalent), fluoride (90%), lead (99%), nitrate, nitrite and PFOA/PFOS at the kitchen tap, with a remineralizer.

For manganese

Iron and manganese oxidizing filter

whole-house, at the point of entry, about $1,800

Air-injection or greensand media; fixes staining at the source.

Free, no obligation

Get on the list for a free in-home water test in Licking County

No water treatment company serves Licking County through Well Water Nerd yet. We are signing licensed companies on county by county: they test at your tap for free, walk you through the numbers, and quote treatment only if something needs fixing. Leave your details and you are first in line. Nothing is shared until a company joins for Licking County, and you get an email naming it first.

What are you worried about?

The test is free and there is no obligation. No company is named yet; your details stay with us until one joins for your area, and we log the time and address of this request.

Common questions

How deep are wells in Licking County?

The typical domestic well in Licking County is 140 feet deep, based on 15,698 wells reported to the state since 1970. One in ten is deeper than 270 feet. 52% are drilled into bedrock.

Is there arsenic in well water in Licking County?

Arsenic was detected in 93% of 70 public well samples in Licking County, and 27% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.

How often should I test a private well in Licking County?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Towns in Licking County

29 towns have fewer than 30 public samples and are included in the Licking County totals above rather than shown separately: Bennington township, Bowling Green township, Burlington township, Eden township, Etna township, Fallsbury township, Franklin township, Granville township, Hanover township, Harrison township, Hartford township, Heath, Hopewell township, Jersey township, Liberty township, Licking township, Madison township, Mary Ann township, McKean township, Monroe township, Newark, Newark township, Newton township, Pataskala, Perry township, Reynoldsburg City township, St. Albans township, Union township, Washington township.

Counties near Licking County

Closest first. Groundwater does not stop at a line on a map, so the next county over is a fair second opinion.

Want the numbers themselves? Download the Ohio dataset as CSV, every county and town, with the sources named.

Sources

  • USGS Water Quality Portal: 725 samples in Licking County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
  • USGS national arsenic model (Ayotte 2017): estimated share of 70,582 people on private wells in Licking County above 10 ug/L of arsenic, from geology, well depth and land use. County estimates of domestic well users with arsenic above 10 ug/L from the USGS national logistic regression model (Ayotte, Medalie and Qi, 2017), with private well population from the USGS 2015 county water-use compilation (Dieter and others, 2018). Retrieved September 15, 2026.
  • Ohio DNR water well logs: 17,640 well records in Licking County, 15,698 domestic. Water well logs filed with the Ohio Department of Natural Resources Division of Water Resources since 1948. Only aggregates are shown; owner names and addresses are never stored. Retrieved September 17, 2026.
  • Ohio EPA regulated sites: 622 regulated sites located in Licking County. Remediation sites, leaking underground storage tank releases (BUSTR) and landfills from the Ohio Environmental Protection Agency and the Division of State Fire Marshal. Retrieved September 17, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.