Well Water Nerd

Well water in Lincoln County, Nebraska

In Lincoln County, 8% of 40 tested well samples exceeded the EPA limit for uranium (30 ug/L), based on public data from Nebraska Groundwater Quality Clearinghouse and USGS Water Quality Portal.

376 individual samples from 288 wells, 1947 to 2025. Data refreshed September 9, 2026.

What individual samples found

Each row summarizes every public sample for that contaminant inside Lincoln County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.

ContaminantSamplesDetectedAbove limitMedianHighestLimit
Uranium
1994 to 2023
40100%8%5.752.630 ug/L
EPA limit
Nitrate
1947 to 2025
37698%7%27910 mg/L
EPA limit
Radon
1994 to 2004
27100%no limit2808802,000 pCi/L
health guideline

Sampled fewer than 10 times, too few to summarize: Arsenic (3), PFOS (2), PFOA (2), Iron (3), Chloride (2), Sodium (2), Manganese (1).

Get the free Lincoln County well report

One email with the numbers above, what they mean for a home in Lincoln County, exactly which tests to order, and what treatment fits the local profile. No spam, unsubscribe in one click.

What this means

The contaminants most often above their limit here are uranium (8% of 40 samples) and nitrate (7% of 376 samples). A well next door can differ sharply from yours because bedrock fractures, well depth and plumbing all matter, so these rates describe the area, not your tap.

Chloride is widespread in local groundwater. It is mainly a staining and taste problem, but high manganese also carries a health advisory for infants.

What to test for in Lincoln County

  • Uranium8% of 40 local samples were above the limit.
  • Nitrate7% of 376 local samples were above the limit.
  • Coliform bacteriaRecommended for every private well, every year.
  • RadonMedian local reading is 280 pCi/L.
  • ChlorideDetected in 100% of local samples.

Treatment that fits the local profile

Uranium
Point-of-use reverse osmosis; Anion exchange; Whole-house anion exchange
Nitrate
Point-of-use reverse osmosis; Anion exchange; Distillation
Chloride
Point-of-use reverse osmosis; Distillation

Get your Lincoln County water tested at home

A licensed local water treatment company tests your tap water in your home, walks you through the numbers, and quotes treatment only if something needs fixing. Free, about 30 minutes, no obligation. Tell us what you need and we match you with a company that serves Lincoln County.

What are you worried about?

The test is free and there is no obligation. Your details go only to the company named above, and we log the time and address of this request.

Common questions

Is there arsenic in well water in Lincoln County?

Arsenic was detected in 100% of 3 public well samples in Lincoln County, and 0% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.

How high is radon in well water in Lincoln County?

The median radon level across 27 public samples in Lincoln County was 280 pCi/L, with a high of 880 pCi/L. New Hampshire recommends treatment above 2,000 pCi/L.

How often should I test a private well in Lincoln County?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Sources

  • Nebraska Groundwater Quality Clearinghouse: 372 samples in Lincoln County. Groundwater quality results compiled by the Nebraska Department of Environment and Energy, University of Nebraska and Nebraska Department of Agriculture in the Groundwater Quality Clearinghouse, contributed by Natural Resources Districts and state agencies. Retrieved September 9, 2026.
  • USGS Water Quality Portal: 86 samples in Lincoln County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.