Well water in Chase County, Nebraska
In Chase County, 6% of 80 tested well samples exceeded the EPA limit for nitrate (10 mg/L), based on public data from Nebraska Groundwater Quality Clearinghouse and USGS Water Quality Portal.
80 individual samples from 48 wells, 1974 to 2024. Data refreshed September 9, 2026.
What individual samples found
Each row summarizes every public sample for that contaminant inside Chase County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.
| Contaminant | Samples | Detected | Above limit | Median | Highest | Limit | |
|---|---|---|---|---|---|---|---|
| Nitrate 1977 to 2024 | 80 | 100% | 6% | 2.06 | 37.3 | 10 mg/L EPA limit |
Sampled fewer than 10 times, too few to summarize: Fluoride (4), Uranium (3), Arsenic (1), Radon (3), Manganese (2), Iron (2), Sodium (1).
Get the free Chase County well report
One email with the numbers above, what they mean for a home in Chase County, exactly which tests to order, and what treatment fits the local profile. No spam, unsubscribe in one click.
What this means
The contaminants most often above their limit here are nitrate (6% of 80 samples). A well next door can differ sharply from yours because bedrock fractures, well depth and plumbing all matter, so these rates describe the area, not your tap.
What to test for in Chase County
- Nitrate6% of 80 local samples were above the limit.
- Coliform bacteriaRecommended for every private well, every year.
- RadonMedian local reading is 410 pCi/L.
- FluorideDetected in 100% of local samples.
Treatment that fits the local profile
- Nitrate
- Point-of-use reverse osmosis; Anion exchange; Distillation
- Fluoride
- Point-of-use reverse osmosis; Activated alumina; Distillation
Get your Chase County water tested at home
A licensed local water treatment company tests your tap water in your home, walks you through the numbers, and quotes treatment only if something needs fixing. Free, about 30 minutes, no obligation. Tell us what you need and we match you with a company that serves Chase County.
Common questions
Is there arsenic in well water in Chase County?
Arsenic was detected in 100% of 1 public well samples in Chase County, and 0% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.
How high is radon in well water in Chase County?
The median radon level across 3 public samples in Chase County was 410 pCi/L, with a high of 760 pCi/L. New Hampshire recommends treatment above 2,000 pCi/L.
How often should I test a private well in Chase County?
Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.
Sources
- Nebraska Groundwater Quality Clearinghouse: 75 samples in Chase County. Groundwater quality results compiled by the Nebraska Department of Environment and Energy, University of Nebraska and Nebraska Department of Agriculture in the Groundwater Quality Clearinghouse, contributed by Natural Resources Districts and state agencies. Retrieved September 9, 2026.
- USGS Water Quality Portal: 21 samples in Chase County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.