Well Water Nerd

Well water in Richland County, Montana

1in5

Testing strongly recommended

tested well samples in Richland County exceeded the EPA limit for fluoride (4 mg/L), based on public data from USGS Water Quality Portal.

892 test results across 10 contaminants from at least 114 wells, 1947 to 2018; nitrate has the most at 125. Data refreshed September 15, 2026.

Compiled by Nick at Well Water Nerd from public records. How these pages are built

An estimated 5,505 people in Richland County get their drinking water from a private well, per USGS 2015 county water use. That is about 46% of residents.

Separately, the USGS national arsenic model estimates that 7% of the 5,505 people on private wells in Richland County draw water above 10 ug/L (the model's range is 6% to 9%), from geology and well depth rather than local tests.

What individual samples found

Each row summarizes every public sample for that contaminant inside Richland County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.

ContaminantAbove limitSamplesDetectedMedianHighestLimit
Fluoride
1947 to 2018
11798%0.54174 mg/L
EPA limit
Arsenic
1975 to 2018
5679%0.6550610 ug/L
EPA limit
Lead
1975 to 2018
5625%01,21015 ug/L
EPA limit
Nitrate
1947 to 2018
12582%0.333.410 mg/L
EPA limit
Copper
1980 to 2018
5467%0.0010.051.3 mg/L
EPA limit
Uranium
2011 to 2018
2176%3.2522.130 ug/L
EPA limit
Sodium
1947 to 2018
no limit118100%46994,10020 mg/L
health guideline
Chloride
1947 to 2018
no limit116100%13.6200,000250 mg/L
nuisance level
Manganese
1973 to 2018
no limit11571%17.211,200300 ug/L
health guideline
Iron
1947 to 2018
no limit11489%120390,000300 ug/L
nuisance level

Over time

Share of samples above the limit by period. A cell needs ten samples to show; a comparison needs twenty in each period. Later periods sample fewer wells, and often the ones already known to have a problem.

Contaminantbefore 20002000s2010s2020s
Nitrate6%89 samplesn/a6%36 samplesn/a
Fluoride19%96 samplesn/a19%21 samplesn/a
Arsenic6%35 samplesn/a14%21 samplesn/a
Lead3%35 samplesn/a14%21 samplesn/a
Copper0%33 samplesn/a0%21 samplesn/a

Arsenic above the limit in Richland County rose from 6% of 35 samples before 2000 to 14% of 21 in the 2010s.

Lead above the limit in Richland County rose from 3% of 35 samples before 2000 to 14% of 21 in the 2010s.

Nitrate, fluoride, copper have held within a few points between the two most recent periods with enough samples.

Closer than the county

See the sampled wells near your address

The same records, drawn around one point: which wells within a few miles were sampled and what they found, how deep the wells next to you were drilled, and any leaking tank or cleanup site within a mile.

Check my address

What this means

The contaminants most often above their limit here are fluoride (19% of 117 samples), arsenic (9% of 56 samples), and lead (7% of 56 samples). A well next door can differ sharply from yours because bedrock fractures, well depth and plumbing all matter, so these rates describe the area, not your tap.

Chloride, Manganese, and Iron are widespread in local groundwater. They are mainly a staining and taste problem, but high manganese also carries a health advisory for infants.

What to test for in Richland County

  1. 1
    Fluoride
    19% of 117 local samples were above the limit.
  2. 2
    Arsenic
    9% of 56 local samples were above the limit.
  3. 3
    Lead
    7% of 56 local samples were above the limit.
  4. 4
    Nitrate
    6% of 125 local samples were above the limit.
  5. 5
    Coliform bacteria
    Recommended for every private well, every year.
  6. 6
    Chloride
    Detected in 100% of local samples.
  7. 7
    Iron
    Detected in 89% of local samples.
  8. 8
    Volatile organic compounds (VOCs)
    65 leaking underground storage tank sites on record locally.

Test your Richland County well for fluoride, arsenic and lead

Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.

Order the Tap Score well water test kit, from $209Already tested? Upload the report

Just want bacteria checked first? Tap Score coliform and E. coli test, $99. Coliform and E. coli are the tests every well needs every year.

Want a quick look before paying for a lab? Home well water test strips on Amazon check hardness, iron, pH and nitrate in minutes. They are a screen, not a result: arsenic, bacteria, uranium and PFAS need a certified lab.

Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says. As an Amazon Associate we earn from qualifying purchases.

Where to get a well tested in Montana: certified labs, state programs and prices.

Already have results back? Get your lab report read against the Richland County numbers, $29. Every line explained, ranked by what matters, with the fix for each.

The rock under Richland County

Lower Tertiary aquifers

Sandstone. Sandstone wells draw from pore space in the rock and tend to be dependable. Iron, manganese and hardness are common, and some sandstones carry arsenic or radium, so a first test should include both.

Classification from the USGS Principal Aquifers of the United States (national map, 2003 edition, GIS release 2015), read at the county centroid. A single well can sit in a different unit, especially near a boundary.

Official help in Montana

Two places to start that are not selling anything: the state program that answers private well questions, and its list of labs certified to run drinking water tests. A certified lab is the difference between a result you can act on and a number.

Contamination sources on record in Richland County

Montana DEQ records 65 leaking underground storage tank sites in Richland County, among 83 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.

65
leaking underground storage tank sitesGasoline and heating oil that leaked from tanks move through groundwater as benzene, MTBE and other volatile organic compounds.
15
registered underground storage tank sitesRegistered tanks are regulated and inspected; they matter most when they are old or near a shallow well.
1
lined landfill or transfer facility
2
other solid waste facilities

Treatment that fits the local profile

Fluoride

Point-of-use reverse osmosis; Activated alumina; Distillation

Arsenic

Point-of-use reverse osmosis; Adsorptive media (iron-based) whole-house; Anion exchange

Lead

Point-of-use reverse osmosis; Certified lead-removal carbon filter; Neutralizing filter to raise pH and stop leaching

Nitrate

Point-of-use reverse osmosis; Anion exchange; Distillation

Iron

Oxidizing filter whole-house; Water softener (low levels); Aeration plus filtration

Systems we would look at first

Some links below are affiliate links. If you buy through one, the merchant pays us a commission at no extra cost to you. It does not change which products we list or what the data says.

For fluoride

Under-sink reverse osmosis system

under-sink or countertop, about $300

Look for NSF/ANSI 58 certification listing the contaminant you need removed.

For fluoride

Aquasana SmartFlow reverse osmosis

under-sink or countertop, about $225

Certified to NSF/ANSI 58 and 53 to reduce arsenic (96%, pentavalent), fluoride (90%), lead (99%), nitrate, nitrite and PFOA/PFOS at the kitchen tap, with a remineralizer.

For arsenic

Whole-house arsenic and uranium filter

whole-house, at the point of entry, about $2,500

Adsorptive iron-based media; sized to your well yield.

For lead

Aquasana Claryum 3-Stage under-sink filter

under-sink or countertop, about $175

Certified to NSF/ANSI 53 to reduce 99% of lead and 99.7% of PFOA and PFOS at the tap. Not a fix for arsenic, nitrate or bacteria.

For lead

Acid neutralizing filter

whole-house, at the point of entry, about $1,200

Raises pH so plumbing stops leaching lead and copper.

For manganese

Iron and manganese oxidizing filter

whole-house, at the point of entry, about $1,800

Air-injection or greensand media; fixes staining at the source.

Free, no obligation

Get on the list for a free in-home water test in Richland County

No water treatment company serves Richland County through Well Water Nerd yet. We are signing licensed companies on county by county: they test at your tap for free, walk you through the numbers, and quote treatment only if something needs fixing. Leave your details and you are first in line. Nothing is shared until a company joins for Richland County, and you get an email naming it first.

What are you worried about?

The test is free and there is no obligation. No company is named yet; your details stay with us until one joins for your area, and we log the time and address of this request.

Common questions

Is there arsenic in well water in Richland County?

Arsenic was detected in 79% of 56 public well samples in Richland County, and 9% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.

How often should I test a private well in Richland County?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Counties near Richland County

Closest first. Groundwater does not stop at a line on a map, so the next county over is a fair second opinion.

Want the numbers themselves? Download the Montana dataset as CSV, every county and town, with the sources named.

Sources

  • USGS Water Quality Portal: 892 samples in Richland County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
  • USGS national arsenic model (Ayotte 2017): estimated share of 5,505 people on private wells in Richland County above 10 ug/L of arsenic, from geology, well depth and land use. County estimates of domestic well users with arsenic above 10 ug/L from the USGS national logistic regression model (Ayotte, Medalie and Qi, 2017), with private well population from the USGS 2015 county water-use compilation (Dieter and others, 2018). Retrieved September 15, 2026.
  • Montana DEQ regulated sites: 83 regulated sites located in Richland County. Petroleum tank releases, underground storage tank facilities and licensed solid waste facilities from the Montana Department of Environmental Quality. Retrieved September 18, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.