Well water in Fillmore township, Minnesota
In Fillmore township, 2% of 50 private wells tested between 2017 and 2019 had nitrate above the EPA limit (10 mg/L), according to the Minnesota Department of Agriculture.
50 private wells tested 2017 to 2019 in state summaries; 24 test results across 9 contaminants from at least 2 wells, 1992 to 1997; arsenic has the most at 3. Data refreshed September 15, 2026.
Compiled by Nick at Well Water Nerd from public records. How these pages are built
What homeowner tests found
MDA Township Testing Program nitrate: private wells tested and reported to the state, 2017 to 2019. Shares are against the level the state applies to each contaminant, named in the last column; several are stricter than EPA.
| Contaminant | Above state level | Wells tested | Median | 95th pct | Highest | State level |
|---|---|---|---|---|---|---|
| Nitrate | 50 | 10 mg/L |
Closer than the town
See the sampled wells near your address
The same records, drawn around one point: which wells within a few miles were sampled and what they found, how deep the wells next to you were drilled, and any leaking tank or cleanup site within a mile.
Check my addressWhat this means
Among homeowners in Fillmore township who sent a sample to the state lab, the health-based limits most often exceeded were nitrate (2% of 50 wells). These are ordinary wells tested by their owners, so the shares are the best available picture of a typical well here, with one caveat: people test more often when they suspect a problem.
What to test for in Fillmore township
- 1Nitrate2% of 50 local wells tested were above the EPA limit.
- 2Coliform bacteriaRecommended for every private well, every year.
- 3CopperDetected in 100% of local samples.
- 4FluorideDetected in 100% of local samples.
- 5ChlorideDetected in 100% of local samples.
- 6ManganeseDetected in 100% of local samples.
- 7IronDetected in 100% of local samples.
Test your Fillmore township well for nitrate, coliform bacteria and copper
Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.
Order the Tap Score well water test kit, from $209Already tested? Upload the report
Just want bacteria checked first? Tap Score coliform and E. coli test, $99. Coliform and E. coli are the tests every well needs every year.
Want a quick look before paying for a lab? Home well water test strips on Amazon check hardness, iron, pH and nitrate in minutes. They are a screen, not a result: arsenic, bacteria, uranium and PFAS need a certified lab.
Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says. As an Amazon Associate we earn from qualifying purchases.
Where to get a well tested in Minnesota: certified labs, state programs and prices.
Already have results back? Get your lab report read against the Fillmore township numbers, $29. Every line explained, ranked by what matters, with the fix for each.
Wells in Fillmore township
80 domestic wells in Fillmore township are on record with the state since 1949. 100% are drilled into bedrock, and the typical well is 417 feet deep (one in ten goes past 534 feet).
In a typical Fillmore township well, bedrock starts about 19 feet down.
Bedrock wells are where arsenic, uranium and radon come from: the water sits in fractures in granite and metamorphic rock and picks up whatever the rock carries. That is why testing for those three matters more here than in a dug or gravel well.
Find your own well's report
The state keeps the driller's report for most wells drilled since 1984. It tells you how deep your well is, where bedrock starts, and how much water it makes, which decides what treatment can work.
- Open Minnesota Well Index and choose Water Well.
- The record shows depth, casing, depth to bedrock, aquifer, static water level and the driller; new wells since 2008 also show the arsenic test result.
Wells drilled since 1974 have records; older wells appear only if a later owner reported them.
The rock under Fillmore township
Upper carbonate aquifer
Carbonate-rock. Limestone and dolomite move water through cracks and solution channels, sometimes very fast. Bacteria and nitrate can travel from the surface to a well in days, so annual bacteria testing matters more here than most places; hardness is a given.
Classification from the USGS Principal Aquifers of the United States (national map, 2003 edition, GIS release 2015), read at the town centroid. A single well can sit in a different unit, especially near a boundary.
Official help in Minnesota
Two places to start that are not selling anything: the state program that answers private well questions, and its list of labs certified to run drinking water tests. A certified lab is the difference between a result you can act on and a number.
- Wells and Borings, Minnesota Department of Health
- Accredited Laboratories as Well Partners, Minnesota Department of Health
Free, no obligation
Get on the list for a free in-home water test in Fillmore township
No water treatment company serves Fillmore township through Well Water Nerd yet. We are signing licensed companies on county by county: they test at your tap for free, walk you through the numbers, and quote treatment only if something needs fixing. Leave your details and you are first in line. Nothing is shared until a company joins for Fillmore township, and you get an email naming it first.
Common questions
How deep are wells in Fillmore township?
The typical domestic well in Fillmore township is 417 feet deep, based on 80 wells reported to the state since 1949. One in ten is deeper than 534 feet. 100% are drilled into bedrock.
How often should I test a private well in Fillmore township?
Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.
Towns near Fillmore township
Closest first. Groundwater does not stop at a line on a map, so the next town over is a fair second opinion.
Want the numbers themselves? Download the Minnesota dataset as CSV, every county and town, with the sources named.
Sources
- USGS Water Quality Portal: 24 samples in Fillmore township. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
- MDA Township Testing Program nitrate: summaries for 1 contaminants in Fillmore township, up to 50 wells each. Nitrate results from the Minnesota Department of Agriculture Township Testing Program, 2013 to 2019, which offered a free test to every well in 344 townships with vulnerable groundwater. Townships were selected for vulnerable geology and row-crop land use, so their shares run above the state as a whole; county and state figures are not derived from them. Share is the final (follow-up) result above 10 mg/L as N. Retrieved September 15, 2026.
- Minnesota Well Index: 83 well records in Fillmore township, 80 domestic. Well construction records from the Minnesota Well Index (Minnesota Department of Health), non-public-supply wells. Only aggregates are shown; owner names and addresses are never stored. Retrieved September 15, 2026.
Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.