Well water in Hampden County, Massachusetts
1in8
Testing recommended
tested well samples in Hampden County exceeded the EPA limit for nitrate (10 mg/L), based on public data from USGS Water Quality Portal.
116 private wells tested 2020 to 2023 in state summaries; 744 test results across 13 contaminants from at least 69 wells, 1954 to 2017; nitrate has the most at 139. Data refreshed September 16, 2026.
Compiled by Nick at Well Water Nerd from public records. How these pages are built
MassDEP offered free PFAS tests to towns without public water and to wells near suspected sources such as landfills, fire stations and airports, so these shares describe the wells that took part rather than every well in town.
An estimated 44,475 people in Hampden County get their drinking water from a private well, per USGS 2015 county water use. That is about 9% of residents.
Separately, the USGS national arsenic model estimates that 7% of the 44,475 people on private wells in Hampden County draw water above 10 ug/L (the model's range is 5% to 10%), from geology and well depth rather than local tests.
What homeowner tests found
MassDEP Private Well PFAS Sampling Program: private wells tested and reported to the state, 2020 to 2023. Shares are against the level the state applies to each contaminant, named in the last column; several are stricter than EPA. County and state figures combine the town summaries, weighted by wells tested; medians are not combined.
What individual samples found
Each row summarizes every public sample for that contaminant inside Hampden County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.
| Contaminant | Above limit | Samples | Detected | Median | Highest | Limit |
|---|---|---|---|---|---|---|
| Nitrate 1954 to 2017 | 139 | 85% | 1.2 | 75 | 10 mg/L EPA limit | |
| Arsenic 1982 to 2017 | 42 | 62% | 0.085 | 12 | 10 ug/L EPA limit | |
| Fluoride 1954 to 2017 | 86 | 59% | 0.01 | 1.5 | 4 mg/L EPA limit | |
| Copper 2002 to 2017 | 29 | 97% | 0.001 | 0.691 | 1.3 mg/L EPA limit | |
| Uranium 2002 to 2017 | 29 | 62% | 0.012 | 1.32 | 30 ug/L EPA limit | |
| Lead 2002 to 2017 | 29 | 76% | 0.145 | 6.81 | 15 ug/L EPA limit | |
| Radium (226 + 228) 2002 to 2017 | 22 | 91% | 0.125 | 0.86 | 5 pCi/L EPA limit | |
| Chloride 1954 to 2017 | no limit | 94 | 100% | 14.2 | 633 | 250 mg/L nuisance level |
| Iron 1954 to 2017 | no limit | 94 | 95% | 75 | 7,020 | 300 ug/L nuisance level |
| Sodium 1954 to 2017 | no limit | 88 | 100% | 10.9 | 309 | 20 mg/L health guideline |
| Manganese 1954 to 2017 | no limit | 84 | 96% | 20 | 942 | 300 ug/L health guideline |
Sampled fewer than 10 times, too few to summarize: E. coli (5), Radon (3).
Over time
Share of samples above the limit by period. A cell needs ten samples to show; a comparison needs twenty in each period. Later periods sample fewer wells, and often the ones already known to have a problem.
| Contaminant | before 2000 | 2000s | 2010s | 2020s |
|---|---|---|---|---|
| Nitrate | 5%77 samples | 25%40 samples | 18%22 samples | n/a |
| Fluoride | 0%53 samples | 0%21 samples | 0%12 samples | n/a |
| Arsenic | 8%13 samples | 0%17 samples | 0%12 samples | n/a |
| Copper | n/a | 0%17 samples | 0%12 samples | n/a |
| Uranium | n/a | 0%17 samples | 0%12 samples | n/a |
| Lead | n/a | 0%17 samples | 0%12 samples | n/a |
Nitrate above the limit in Hampden County fell from 25% of 40 samples in the 2000s to 18% of 22 in the 2010s.
Fluoride has held within a few points between the two most recent periods with enough samples.
Closer than the county
See the sampled wells near your address
The same records, drawn around one point: which wells within a few miles were sampled and what they found, how deep the wells next to you were drilled, and any leaking tank or cleanup site within a mile.
Check my addressWhat this means
Among homeowners in Hampden County who sent a sample to the state lab, the health-based limits most often exceeded were PFOA (6% of 116 wells) and PFOS (4% of 116 wells). These are ordinary wells tested by their owners, so the shares are the best available picture of a typical well here, with one caveat: people test more often when they suspect a problem.
What to test for in Hampden County
- 1Nitrate13% of 139 local samples were above the limit.
- 2PFOA6% of 116 local wells tested were above the EPA limit.
- 3PFOS4% of 116 local wells tested were above the EPA limit.
- 4Arsenic2% of 42 local samples were above the limit.
- 5Coliform bacteriaRecommended for every private well, every year.
- 6RadonMedian local reading is 290 pCi/L.
- 7ChlorideDetected in 100% of local samples.
- 8CopperDetected in 97% of local samples.
- 9PFAS54 unlined landfills on record locally.
- 10Volatile organic compounds (VOCs)54 unlined landfills on record locally.
- 11Metals panel68 hazardous waste sites on record locally.
Test your Hampden County well for nitrate, PFOA and PFOS
Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.
Order the Tap Score well water test kit, from $209Already tested? Upload the report
Just want bacteria checked first? Tap Score coliform and E. coli test, $99. Coliform and E. coli are the tests every well needs every year.
Want a quick look before paying for a lab? Home well water test strips on Amazon check hardness, iron, pH and nitrate in minutes. They are a screen, not a result: arsenic, bacteria, uranium and PFAS need a certified lab.
Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says. As an Amazon Associate we earn from qualifying purchases.
Where to get a well tested in Massachusetts: certified labs, state programs and prices.
Already have results back? Get your lab report read against the Hampden County numbers, $29. Every line explained, ranked by what matters, with the fix for each.
Wells in Hampden County
4,678 domestic wells in Hampden County are on record with the state since 1914. 94% are drilled into bedrock, and the typical well is 283 feet deep (one in ten goes past 522 feet).
In a typical Hampden County well, bedrock starts about 30 feet down, the median yield is 8 gallons per minute, 15% of wells yield under 3 gallons per minute and usually need a storage tank.
Bedrock wells are where arsenic, uranium and radon come from: the water sits in fractures in granite and metamorphic rock and picks up whatever the rock carries. That is why testing for those three matters more here than in a dug or gravel well.
Find your own well's report
The state keeps the driller's report for most wells drilled since 1984. It tells you how deep your well is, where bedrock starts, and how much water it makes, which decides what treatment can work.
- Open MassDEP Well Location Viewer and choose Water Well.
- The completion report lists total depth, depth to bedrock, static water level, yield and the driller.
Drillers have filed completion reports with the state since 1984; the viewer's public copy is refreshed a few times a year.
The rock under Hampden County
Early Mesozoic basin aquifers
Sandstone. Sandstone wells draw from pore space in the rock and tend to be dependable. Iron, manganese and hardness are common, and some sandstones carry arsenic or radium, so a first test should include both.
Classification from the USGS Principal Aquifers of the United States (national map, 2003 edition, GIS release 2015), read at the county centroid. A single well can sit in a different unit, especially near a boundary.
Official help in Massachusetts
Two places to start that are not selling anything: the state program that answers private well questions, and its list of labs certified to run drinking water tests. A certified lab is the difference between a result you can act on and a number.
- Private Wells, MassDEP
- Certified Laboratories, MassDEP
Contamination sources on record in Hampden County
MassDEP records 54 unlined landfills and 68 hazardous waste sites in Hampden County, among 562 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.
- 54
- unlined landfillsOlder unlined landfills are a leading source of PFAS, VOCs and metals in nearby wells.
- 68
- hazardous waste sitesSolvents, degreasers and metals from industrial sites can travel far in fractured bedrock.
- 340
- registered underground storage tank sitesRegistered tanks are regulated and inspected; they matter most when they are old or near a shallow well.
- 10
- lined landfills and transfer facilities
- 90
- other remediation projects
Treatment that fits the local profile
PFOA
Granular activated carbon whole-house; Point-of-use reverse osmosis; Anion exchange
Nitrate
Point-of-use reverse osmosis; Anion exchange; Distillation
Arsenic
Point-of-use reverse osmosis; Adsorptive media (iron-based) whole-house; Anion exchange
Iron
Oxidizing filter whole-house; Water softener (low levels); Aeration plus filtration
Manganese
Oxidizing filter (greensand, birm) whole-house; Water softener (low levels); Point-of-use reverse osmosis
Systems we would look at first
Some links below are affiliate links. If you buy through one, the merchant pays us a commission at no extra cost to you. It does not change which products we list or what the data says.
For PFOA
Under-sink reverse osmosis system
under-sink or countertop, about $300
Look for NSF/ANSI 58 certification listing the contaminant you need removed.
For PFOA
Whole-house PFAS carbon system
whole-house, at the point of entry, about $3,000
Granular activated carbon certified to NSF/ANSI 53 for PFOA and PFOS; replace media on schedule.
For PFOA
Aquasana SmartFlow reverse osmosis
under-sink or countertop, about $225
Certified to NSF/ANSI 58 and 53 to reduce arsenic (96%, pentavalent), fluoride (90%), lead (99%), nitrate, nitrite and PFOA/PFOS at the kitchen tap, with a remineralizer.
For arsenic
Whole-house arsenic and uranium filter
whole-house, at the point of entry, about $2,500
Adsorptive iron-based media; sized to your well yield.
For iron
Iron and manganese oxidizing filter
whole-house, at the point of entry, about $1,800
Air-injection or greensand media; fixes staining at the source.
Free, no obligation
Get on the list for a free in-home water test in Hampden County
No water treatment company serves Hampden County through Well Water Nerd yet. We are signing licensed companies on county by county: they test at your tap for free, walk you through the numbers, and quote treatment only if something needs fixing. Leave your details and you are first in line. Nothing is shared until a company joins for Hampden County, and you get an email naming it first.
Common questions
How deep are wells in Hampden County?
The typical domestic well in Hampden County is 283 feet deep, based on 4,678 wells reported to the state since 1914. One in ten is deeper than 522 feet. 94% are drilled into bedrock.
Is there arsenic in well water in Hampden County?
Arsenic was detected in 62% of 42 public well samples in Hampden County, and 2% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.
How often should I test a private well in Hampden County?
Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.
Towns in Hampden County
22 towns have fewer than 30 public samples and are included in the Hampden County totals above rather than shown separately: Agawam Town, Blandford, Brimfield, Chester, Chicopee, East Longmeadow, Granville, Holland, Holyoke, Longmeadow, Ludlow, Monson, Montgomery, Palmer Town, Russell, Southwick, Springfield, Tolland, Wales, Westfield, West Springfield Town, Wilbraham.
Counties near Hampden County
Closest first. Groundwater does not stop at a line on a map, so the next county over is a fair second opinion.
Want the numbers themselves? Download the Massachusetts dataset as CSV, every county and town, with the sources named.
Sources
- USGS Water Quality Portal: 744 samples in Hampden County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
- MassDEP Private Well PFAS Sampling Program: summaries for 4 contaminants in Hampden County, up to 116 wells each. Private well PFAS results from the Massachusetts Department of Environmental Protection free sampling program, 2020 to 2023, one anonymized row per well. Shares are against the EPA limit for each compound (4 ng/L for PFOA and PFOS, 10 ng/L for PFHxS and PFNA). Massachusetts applies its own PFAS6 standard of 20 ng/L to the sum of six compounds; that sum is not a contaminant page here. Zero means not detected. Retrieved September 16, 2026.
- USGS national arsenic model (Ayotte 2017): estimated share of 44,475 people on private wells in Hampden County above 10 ug/L of arsenic, from geology, well depth and land use. County estimates of domestic well users with arsenic above 10 ug/L from the USGS national logistic regression model (Ayotte, Medalie and Qi, 2017), with private well population from the USGS 2015 county water-use compilation (Dieter and others, 2018). Retrieved September 15, 2026.
- MassDEP well completion reports: 6,694 well records in Hampden County, 4,678 domestic. Well completion reports filed with the Massachusetts Department of Environmental Protection, as published in the Well Location Viewer (April 2023 vintage). Only aggregates are shown; owner names and addresses are never stored. Retrieved September 16, 2026.
- MassDEP regulated sites: 562 regulated sites located in Hampden County. Chapter 21E release sites, solid waste landfills and underground storage tank facilities from the Massachusetts Department of Environmental Protection, through MassGIS. Retrieved September 16, 2026.
Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.