Well Water Nerd

Well water in Whiting, Maine

In Whiting, none of 39 private wells tested had nitrate above the Maine guideline (10 mg/L), according to Maine CDC.

The strongest signal is arsenic: 4% of 28 local wells tested were above the Maine guideline, too few samples to carry the headline but first on the test list below.

39 private wells tested in state summaries. Data refreshed September 3, 2026.

Compiled by Nick at Well Water Nerd from public records. How these pages are built

What homeowner tests found

Maine Tracking Network private well summaries: private wells tested and reported to the state. Shares are against the level the state applies to each contaminant, named in the last column; several are stricter than EPA.

ContaminantAbove state levelWells testedMedian95th pctHighestState level
Manganese27300 ug/L
Arsenic2810 ug/L
Nitrate3910 mg/L
Nitrite391 mg/L
Fluoride312 mg/L
Uranium2730 ug/L

Closer than the town

See the sampled wells near your address

The same records, drawn around one point: which wells within a few miles were sampled and what they found, how deep the wells next to you were drilled, and any leaking tank or cleanup site within a mile.

Check my address

What this means

Among homeowners in Whiting who sent a sample to the state lab, the health-based limits most often exceeded were arsenic (4% of 28 wells). These are ordinary wells tested by their owners, so the shares are the best available picture of a typical well here, with one caveat: people test more often when they suspect a problem.

What to test for in Whiting

  1. 1
    Arsenic
    4% of 28 local wells tested were above the Maine guideline.
  2. 2
    Coliform bacteria
    Recommended for every private well, every year.
  3. 3
    Nitrate
    Recommended for every private well, especially near farms or septic systems.
  4. 4
    Manganese
    4% of 27 local wells tested were above the Maine guideline.
  5. 5
    Volatile organic compounds (VOCs)
    1 leaking underground storage tank site on record locally.

Test your Whiting well for arsenic, coliform bacteria and nitrate

Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.

Order the Tap Score well water test kit, from $209Already tested? Upload the report

Just want bacteria checked first? Tap Score coliform and E. coli test, $99. Coliform and E. coli are the tests every well needs every year.

Want a quick look before paying for a lab? Home well water test strips on Amazon check hardness, iron, pH and nitrate in minutes. They are a screen, not a result: arsenic, bacteria, uranium and PFAS need a certified lab.

Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says. As an Amazon Associate we earn from qualifying purchases.

Where to get a well tested in Maine: certified labs, state programs and prices.

Already have results back? Get your lab report read against the Whiting numbers, $29. Every line explained, ranked by what matters, with the fix for each.

Wells in Whiting

149 domestic wells in Whiting are on record with the state since 1972. 95% are drilled into bedrock, and the typical well is 280 feet deep (one in ten goes past 420 feet).

In a typical Whiting well, bedrock starts about 12 feet down, the median yield is 4 gallons per minute, 38% of wells yield under 3 gallons per minute and usually need a storage tank.

Bedrock wells are where arsenic, uranium and radon come from: the water sits in fractures in granite and metamorphic rock and picks up whatever the rock carries. That is why testing for those three matters more here than in a dug or gravel well.

5
1970s
6
1980s
21
1990s
35
2000s
33
2010s
37
2020s

The rock under Whiting

Not a principal aquifer

The USGS map places this area outside any principal aquifer, which usually means wells here draw from fractured bedrock or thin local deposits rather than a large regional aquifer. Bedrock wells of that kind are where arsenic, radon and uranium turn up, and yields vary from well to well.

Classification from the USGS Principal Aquifers of the United States (national map, 2003 edition, GIS release 2015), read at the town centroid. A single well can sit in a different unit, especially near a boundary.

Official help in Maine

Two places to start that are not selling anything: the state program that answers private well questions, and its list of labs certified to run drinking water tests. A certified lab is the difference between a result you can act on and a number.

Contamination sources on record in Whiting

Maine DEP records 1 leaking underground storage tank site in Whiting, among 3 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.

1
leaking underground storage tank siteGasoline and heating oil that leaked from tanks move through groundwater as benzene, MTBE and other volatile organic compounds.
2
other remediation projects

Free, no obligation

Get on the list for a free in-home water test in Whiting

No water treatment company serves Whiting through Well Water Nerd yet. We are signing licensed companies on county by county: they test at your tap for free, walk you through the numbers, and quote treatment only if something needs fixing. Leave your details and you are first in line. Nothing is shared until a company joins for Whiting, and you get an email naming it first.

What are you worried about?

The test is free and there is no obligation. No company is named yet; your details stay with us until one joins for your area, and we log the time and address of this request.

Common questions

How deep are wells in Whiting?

The typical domestic well in Whiting is 280 feet deep, based on 149 wells reported to the state since 1972. One in ten is deeper than 420 feet. 95% are drilled into bedrock.

How often should I test a private well in Whiting?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Towns near Whiting

Closest first. Groundwater does not stop at a line on a map, so the next town over is a fair second opinion.

Want the numbers themselves? Download the Maine dataset as CSV, every county and town, with the sources named.

Sources

  • Maine Tracking Network private well summaries: summaries for 6 contaminants in Whiting, up to 39 wells each. Town summaries of private well tests run by the Maine Health and Environmental Testing Laboratory, published by Maine CDC through the Maine Tracking Network. Shares are against Maine's guideline for each analyte (arsenic 10 ug/L, uranium 30 ug/L, fluoride 2 mg/L, manganese 0.3 mg/L, nitrate 10 mg/L, nitrite 1 mg/L). Towns with too few tests are suppressed (NR). Only the share above the guideline and wells tested are published; no medians. Retrieved September 3, 2026.
  • Maine Geological Survey well database: 154 well records in Whiting, 149 domestic. Well construction records reported to the Maine Geological Survey by licensed well drillers. Only aggregates are shown; owner names and addresses are never stored. Retrieved September 3, 2026.
  • Maine DEP regulated sites: 3 regulated sites located in Whiting. Remediation sites, leaking underground storage tanks and closed municipal landfills from the Maine Department of Environmental Protection. Retrieved September 3, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.