Well Water Nerd

Well water in Buckfield, Maine

In Buckfield, 27% of 70 private wells tested had arsenic above the Maine guideline (10 ug/L), according to Maine CDC.

87 private wells tested in state summaries; 3 individual samples from 2 wells, 1983 to 2006. Data refreshed September 3, 2026.

What homeowner tests found

Maine Tracking Network private well summaries: private wells tested and reported to the state. Shares are against the level the state applies to each contaminant, named in the last column; several are stricter than EPA.

ContaminantWells testedAbove state levelMedian95th pctHighestState level
Arsenic7027%10 ug/L
Uranium656%30 ug/L
Manganese686%300 ug/L
Fluoride871%2 mg/L
Nitrate800%10 mg/L
Nitrite780%1 mg/L

Get the free Buckfield well report

One email with the numbers above, what they mean for a home in Buckfield, exactly which tests to order, and what treatment fits the local profile. No spam, unsubscribe in one click.

What this means

Among homeowners in Buckfield who sent a sample to the state lab, the health-based limits most often exceeded were arsenic (27% of 70 wells), uranium (6% of 65 wells), and fluoride (1% of 87 wells). These are ordinary wells tested by their owners, so the shares are the best available picture of a typical well here, with one caveat: people test more often when they suspect a problem.

What to test for in Buckfield

  • PFAS2 unlined landfills on record locally.
  • Volatile organic compounds (VOCs)2 unlined landfills on record locally.
  • Metals panel2 hazardous waste sites on record locally.
  • Arsenic27% of 70 local wells tested were above the Maine guideline.
  • Uranium6% of 65 local wells tested were above the Maine guideline.
  • Manganese6% of 68 local wells tested were above the Maine guideline.
  • Fluoride1% of 87 local wells tested were above the Maine guideline.
  • Coliform bacteriaRecommended for every private well, every year.
  • ChlorideDetected in 100% of local samples.
  • NitrateRecommended for every private well, especially near farms or septic systems.

Wells in Buckfield

170 domestic wells in Buckfield are on record with the state since 1985. 99% are drilled into bedrock, and the typical well is 330 feet deep (one in ten goes past 506 feet).

In a typical Buckfield well, bedrock starts about 22 feet down, the median yield is 5 gallons per minute, 25% of wells yield under 3 gallons per minute and usually need a storage tank.

Bedrock wells are where arsenic, uranium and radon come from: the water sits in fractures in granite and metamorphic rock and picks up whatever the rock carries. That is why testing for those three matters more here than in a dug or gravel well.

15
1980s
9
1990s
48
2000s
38
2010s
60
2020s

Contamination sources on record in Buckfield

Maine DEP records 2 unlined landfills and 2 hazardous waste sites in Buckfield, among 6 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.

2
unlined landfillsOlder unlined landfills are a leading source of PFAS, VOCs and metals in nearby wells.
2
hazardous waste sitesSolvents, degreasers and metals from industrial sites can travel far in fractured bedrock.
2
other remediation projects

Treatment that fits the local profile

Arsenic
Point-of-use reverse osmosis; Adsorptive media (iron-based) whole-house; Anion exchange
Uranium
Point-of-use reverse osmosis; Anion exchange; Whole-house anion exchange
Manganese
Oxidizing filter (greensand, birm) whole-house; Water softener (low levels); Point-of-use reverse osmosis
Chloride
Point-of-use reverse osmosis; Distillation

Book a free water test in Buckfield

A licensed local water treatment company tests your tap water in your home, walks you through the numbers, and quotes treatment only if something needs fixing. Free, about 30 minutes, no obligation.

What are you worried about?

The test is free and there is no obligation. Your details go only to the company named above, and we log the time and address of this request.

Common questions

How deep are wells in Buckfield?

The typical domestic well in Buckfield is 330 feet deep, based on 170 wells reported to the state since 1985. One in ten is deeper than 506 feet. 99% are drilled into bedrock.

Is there arsenic in well water in Buckfield?

Arsenic was detected in 100% of 2 public well samples in Buckfield, and 100% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.

How often should I test a private well in Buckfield?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Sources

  • USGS Water Quality Portal: 8 samples in Buckfield. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
  • Maine Tracking Network private well summaries: summaries for 6 contaminants in Buckfield, up to 87 wells each. Town summaries of private well tests run by the Maine Health and Environmental Testing Laboratory, published by Maine CDC through the Maine Tracking Network. Shares are against Maine's guideline for each analyte (arsenic 10 ug/L, uranium 30 ug/L, fluoride 2 mg/L, manganese 0.3 mg/L, nitrate 10 mg/L, nitrite 1 mg/L). Towns with too few tests are suppressed (NR). Only the share above the guideline and wells tested are published; no medians. Retrieved September 3, 2026.
  • Maine Geological Survey well database: 170 well records in Buckfield, 170 domestic. Well construction records reported to the Maine Geological Survey by licensed well drillers. Only aggregates are shown; owner names and addresses are never stored. Retrieved September 3, 2026.
  • Maine DEP regulated sites: 6 regulated sites located in Buckfield. Remediation sites, leaking underground storage tanks and closed municipal landfills from the Maine Department of Environmental Protection. Retrieved September 3, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.