Well Water Nerd

Well water in Washington County, Iowa

1in15

Testing recommended

tested well samples in Washington County exceeded the EPA limit for nitrate (10 mg/L), based on public data from USGS Water Quality Portal.

1,366 test results across 13 contaminants from at least 91 wells, 1934 to 2017; nitrate has the most at 205. Data refreshed September 15, 2026.

Compiled by Nick at Well Water Nerd from public records. How these pages are built

An estimated 2,613 people in Washington County get their drinking water from a private well, per USGS 2015 county water use. That is about 12% of residents.

Separately, the USGS national arsenic model estimates that 21% of the 2,613 people on private wells in Washington County draw water above 10 ug/L (the model's range is 16% to 28%), from geology and well depth rather than local tests.

What individual samples found

Each row summarizes every public sample for that contaminant inside Washington County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.

ContaminantAbove limitSamplesDetectedMedianHighestLimit
Nitrate
1934 to 2017
20561%018010 mg/L
EPA limit
Radium (226 + 228)
1971 to 2017
9375%0.8995 pCi/L
EPA limit
Fluoride
1934 to 2017
18899%0.454.54 mg/L
EPA limit
Lead
1971 to 2017
4713%00.19915 ug/L
EPA limit
Arsenic
1971 to 2017
4626%03.710 ug/L
EPA limit
Copper
1971 to 2017
4015%00.971.3 mg/L
EPA limit
Chloride
1934 to 2017
no limit19899%30.51,480250 mg/L
nuisance level
Iron
1934 to 2017
no limit18598%930145,000300 ug/L
nuisance level
Manganese
1934 to 2017
no limit18364%0620300 ug/L
health guideline
Sodium
1953 to 2017
no limit159100%651,60020 mg/L
health guideline
Radon
1983 to 2014
no limit1250%865802,000 pCi/L
health guideline

Sampled fewer than 10 times, too few to summarize: Uranium (6), E. coli (4).

Over time

Share of samples above the limit by period. A cell needs ten samples to show; a comparison needs twenty in each period. Later periods sample fewer wells, and often the ones already known to have a problem.

Contaminantbefore 20002000s2010s2020s
Nitrate7%182 samples5%19 samplesn/an/a
Fluoride1%162 samples0%22 samplesn/an/a
Radium (226 + 228)25%16 samples3%69 samplesn/an/a
Lead0%28 samples0%15 samplesn/an/a
Arsenic0%27 samples0%15 samplesn/an/a

Fluoride has held within a few points between the two most recent periods with enough samples.

Closer than the county

See the sampled wells near your address

The same records, drawn around one point: which wells within a few miles were sampled and what they found, how deep the wells next to you were drilled, and any leaking tank or cleanup site within a mile.

Check my address

What this means

The contaminants most often above their limit here are nitrate (7% of 205 samples), radium (226 + 228) (6% of 93 samples), and fluoride (1% of 188 samples). A well next door can differ sharply from yours because bedrock fractures, well depth and plumbing all matter, so these rates describe the area, not your tap.

Chloride, Iron, and Manganese are widespread in local groundwater. They are mainly a staining and taste problem, but high manganese also carries a health advisory for infants.

What to test for in Washington County

  1. 1
    Nitrate
    7% of 205 local samples were above the limit.
  2. 2
    Radium (226 + 228)
    6% of 93 local samples were above the limit.
  3. 3
    Fluoride
    1% of 188 local samples were above the limit.
  4. 4
    Coliform bacteria
    Recommended for every private well, every year.
  5. 5
    Radon
    Median local reading is 86 pCi/L.
  6. 6
    Chloride
    Detected in 99% of local samples.
  7. 7
    Iron
    Detected in 98% of local samples.
  8. 8
    Volatile organic compounds (VOCs)
    51 leaking underground storage tank sites on record locally.
  9. 9
    Metals panel
    5 hazardous waste sites on record locally.

Test your Washington County well for nitrate, radium (226 + 228) and fluoride

Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.

Order the Tap Score well water test kit, from $209Already tested? Upload the report

Just want bacteria checked first? Tap Score coliform and E. coli test, $99. Coliform and E. coli are the tests every well needs every year.

Want a quick look before paying for a lab? Home well water test strips on Amazon check hardness, iron, pH and nitrate in minutes. They are a screen, not a result: arsenic, bacteria, uranium and PFAS need a certified lab.

Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says. As an Amazon Associate we earn from qualifying purchases.

Where to get a well tested in Iowa: certified labs, state programs and prices.

Already have results back? Get your lab report read against the Washington County numbers, $29. Every line explained, ranked by what matters, with the fix for each.

The rock under Washington County

Not a principal aquifer

The USGS map places this area outside any principal aquifer, which usually means wells here draw from fractured bedrock or thin local deposits rather than a large regional aquifer. Bedrock wells of that kind are where arsenic, radon and uranium turn up, and yields vary from well to well.

Classification from the USGS Principal Aquifers of the United States (national map, 2003 edition, GIS release 2015), read at the county centroid. A single well can sit in a different unit, especially near a boundary.

Official help in Iowa

Two places to start that are not selling anything: the state program that answers private well questions, and its list of labs certified to run drinking water tests. A certified lab is the difference between a result you can act on and a number.

Contamination sources on record in Washington County

Iowa DNR records 51 leaking underground storage tank sites and 5 hazardous waste sites in Washington County, among 80 regulated sites in total. Groundwater does not follow property lines, so a well within a few hundred feet of one of these is worth testing for what that site could release.

51
leaking underground storage tank sitesGasoline and heating oil that leaked from tanks move through groundwater as benzene, MTBE and other volatile organic compounds.
5
hazardous waste sitesSolvents, degreasers and metals from industrial sites can travel far in fractured bedrock.
2
lined landfills and transfer facilities
12
other remediation projects
10
other solid waste facilities

Treatment that fits the local profile

Nitrate

Point-of-use reverse osmosis; Anion exchange; Distillation

Radium (226 + 228)

Water softener (cation exchange); Point-of-use reverse osmosis

Fluoride

Point-of-use reverse osmosis; Activated alumina; Distillation

Iron

Oxidizing filter whole-house; Water softener (low levels); Aeration plus filtration

Manganese

Oxidizing filter (greensand, birm) whole-house; Water softener (low levels); Point-of-use reverse osmosis

Systems we would look at first

Some links below are affiliate links. If you buy through one, the merchant pays us a commission at no extra cost to you. It does not change which products we list or what the data says.

For nitrate

Under-sink reverse osmosis system

under-sink or countertop, about $300

Look for NSF/ANSI 58 certification listing the contaminant you need removed.

For nitrate

Aquasana SmartFlow reverse osmosis

under-sink or countertop, about $225

Certified to NSF/ANSI 58 and 53 to reduce arsenic (96%, pentavalent), fluoride (90%), lead (99%), nitrate, nitrite and PFOA/PFOS at the kitchen tap, with a remineralizer.

For iron

Iron and manganese oxidizing filter

whole-house, at the point of entry, about $1,800

Air-injection or greensand media; fixes staining at the source.

Free, no obligation

Get on the list for a free in-home water test in Washington County

No water treatment company serves Washington County through Well Water Nerd yet. We are signing licensed companies on county by county: they test at your tap for free, walk you through the numbers, and quote treatment only if something needs fixing. Leave your details and you are first in line. Nothing is shared until a company joins for Washington County, and you get an email naming it first.

What are you worried about?

The test is free and there is no obligation. No company is named yet; your details stay with us until one joins for your area, and we log the time and address of this request.

Common questions

Is there arsenic in well water in Washington County?

Arsenic was detected in 26% of 46 public well samples in Washington County, and 0% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.

How high is radon in well water in Washington County?

The median radon level across 12 public samples in Washington County was 86 pCi/L, with a high of 580 pCi/L. New Hampshire recommends treatment above 2,000 pCi/L.

How often should I test a private well in Washington County?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Counties near Washington County

Closest first. Groundwater does not stop at a line on a map, so the next county over is a fair second opinion.

Want the numbers themselves? Download the Iowa dataset as CSV, every county and town, with the sources named.

Sources

  • USGS Water Quality Portal: 1,366 samples in Washington County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
  • USGS national arsenic model (Ayotte 2017): estimated share of 2,613 people on private wells in Washington County above 10 ug/L of arsenic, from geology, well depth and land use. County estimates of domestic well users with arsenic above 10 ug/L from the USGS national logistic regression model (Ayotte, Medalie and Qi, 2017), with private well population from the USGS 2015 county water-use compilation (Dieter and others, 2018). Retrieved September 15, 2026.
  • Iowa DNR regulated sites: 80 regulated sites located in Washington County. Contaminated sites, solid waste facilities and leaking underground storage tank sites from the Iowa Department of Natural Resources. Retrieved September 18, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.