Well water in Baker County, Georgia
In Baker County, none of 41 tested well samples exceeded the EPA limit for fluoride, based on public data from USGS Water Quality Portal.
The strongest signal is coliform bacteria: Recommended for every private well, every year, too few samples to carry the headline but first on the test list below.
322 test results across 13 contaminants from at least 10 wells, 1964 to 2025; fluoride has the most at 41. Data refreshed September 15, 2026.
Compiled by Nick at Well Water Nerd from public records. How these pages are built
An estimated 2,499 people in Baker County get their drinking water from a private well, per USGS 2015 county water use. That is about 79% of residents.
Separately, the USGS national arsenic model estimates that 1% of the 2,499 people on private wells in Baker County draw water above 10 ug/L (the model's range is <1% to 2%), from geology and well depth rather than local tests.
What individual samples found
Each row summarizes every public sample for that contaminant inside Baker County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.
| Contaminant | Above limit | Samples | Detected | Median | Highest | Limit |
|---|---|---|---|---|---|---|
| Fluoride 1964 to 2025 | 41 | 32% | 0 | 0.5 | 4 mg/L EPA limit | |
| Nitrate 1981 to 2025 | 39 | 100% | 1.63 | 6.1 | 10 mg/L EPA limit | |
| Arsenic 1995 to 2025 | 26 | 27% | 0 | 0.09 | 10 ug/L EPA limit | |
| Uranium 1995 to 2025 | 26 | 88% | 0.065 | 0.109 | 30 ug/L EPA limit | |
| Lead 1995 to 2025 | 26 | 54% | 0.036 | 1.33 | 15 ug/L EPA limit | |
| Copper 1995 to 2025 | 26 | 65% | 0.001 | 0.006 | 1.3 mg/L EPA limit | |
| Manganese 1981 to 2025 | no limit | 41 | 37% | 0 | 30 | 300 ug/L health guideline |
| Sodium 1964 to 2025 | no limit | 41 | 100% | 1.7 | 48 | 20 mg/L health guideline |
| Iron 1981 to 2025 | no limit | 39 | 31% | 0 | 260 | 300 ug/L nuisance level |
Sampled fewer than 10 times, too few to summarize: Radium (226 + 228) (8), E. coli (2), Radon (6), Chloride (1).
Over time
Share of samples above the limit by period. A cell needs ten samples to show; a comparison needs twenty in each period. Later periods sample fewer wells, and often the ones already known to have a problem.
| Contaminant | before 2000 | 2000s | 2010s | 2020s |
|---|---|---|---|---|
| Fluoride | 0%13 samples | 0%17 samples | n/a | n/a |
| Nitrate | 0%10 samples | 0%19 samples | n/a | n/a |
Closer than the county
See the sampled wells near your address
The same records, drawn around one point: which wells within a few miles were sampled and what they found, how deep the wells next to you were drilled, and any leaking tank or cleanup site within a mile.
Check my addressWhat this means
Among contaminants with a federal limit, no tested sample in Baker County came back above it. That is reassuring, but sampling is uneven: wells that were never tested are not in this data.
Chloride is widespread in local groundwater. It is mainly a staining and taste problem, but high manganese also carries a health advisory for infants.
What to test for in Baker County
- 1Coliform bacteriaRecommended for every private well, every year.
- 2RadonMedian local reading is 140 pCi/L.
- 3NitrateRecommended for every private well, especially near farms or septic systems.
- 4ChlorideDetected in 100% of local samples.
- 5CopperDetected in 65% of local samples.
Test your Baker County well for coliform bacteria, radon and nitrate
Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.
Order the Tap Score well water test kit, from $209Already tested? Upload the report
Just want bacteria checked first? Tap Score coliform and E. coli test, $99. Coliform and E. coli are the tests every well needs every year.
Want a quick look before paying for a lab? Home well water test strips on Amazon check hardness, iron, pH and nitrate in minutes. They are a screen, not a result: arsenic, bacteria, uranium and PFAS need a certified lab.
Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says. As an Amazon Associate we earn from qualifying purchases.
Where to get a well tested in Georgia: certified labs, state programs and prices.
Already have results back? Get your lab report read against the Baker County numbers, $29. Every line explained, ranked by what matters, with the fix for each.
The rock under Baker County
Floridan aquifer system
Carbonate-rock. Limestone and dolomite move water through cracks and solution channels, sometimes very fast. Bacteria and nitrate can travel from the surface to a well in days, so annual bacteria testing matters more here than most places; hardness is a given.
Classification from the USGS Principal Aquifers of the United States (national map, 2003 edition, GIS release 2015), read at the county centroid. A single well can sit in a different unit, especially near a boundary.
Official help in Georgia
Two places to start that are not selling anything: the state program that answers private well questions, and its list of labs certified to run drinking water tests. A certified lab is the difference between a result you can act on and a number.
- Well Water, Georgia Department of Public Health
- Drinking Water (certified laboratory lists), Georgia EPD
Free, no obligation
Get on the list for a free in-home water test in Baker County
No water treatment company serves Baker County through Well Water Nerd yet. We are signing licensed companies on county by county: they test at your tap for free, walk you through the numbers, and quote treatment only if something needs fixing. Leave your details and you are first in line. Nothing is shared until a company joins for Baker County, and you get an email naming it first.
Common questions
Is there arsenic in well water in Baker County?
Arsenic was detected in 27% of 26 public well samples in Baker County, and 0% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.
How often should I test a private well in Baker County?
Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.
Counties near Baker County
Closest first. Groundwater does not stop at a line on a map, so the next county over is a fair second opinion.
Want the numbers themselves? Download the Georgia dataset as CSV, every county and town, with the sources named.
Sources
- USGS Water Quality Portal: 322 samples in Baker County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
- USGS national arsenic model (Ayotte 2017): estimated share of 2,499 people on private wells in Baker County above 10 ug/L of arsenic, from geology, well depth and land use. County estimates of domestic well users with arsenic above 10 ug/L from the USGS national logistic regression model (Ayotte, Medalie and Qi, 2017), with private well population from the USGS 2015 county water-use compilation (Dieter and others, 2018). Retrieved September 15, 2026.
Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.