Well Water Nerd

Well water in Lawrence County, Alabama

No public well test results have been compiled for Lawrence County yet. The USGS national arsenic model estimates that <1% of the 5,486 people on private wells there draw water with arsenic above 10 ug/L, the EPA limit, based on geology, well depth and land use rather than local tests.

The strongest signal is coliform bacteria: Recommended for every private well, every year, too few samples to carry the headline but first on the test list below.

198 test results across 15 contaminants from at least 11 wells, 1981 to 2022; manganese has the most at 25. Data refreshed September 15, 2026.

Compiled by Nick at Well Water Nerd from public records. How these pages are built

An estimated 5,486 people in Lawrence County get their drinking water from a private well, per USGS 2015 county water use. That is about 17% of residents.

Separately, the USGS national arsenic model estimates that <1% of the 5,486 people on private wells in Lawrence County draw water above 10 ug/L, from geology and well depth rather than local tests.

What individual samples found

Each row summarizes every public sample for that contaminant inside Lawrence County. Above limit means above the EPA maximum contaminant level; where EPA has no enforceable limit, the row shows a health guideline or nuisance level instead.

ContaminantAbove limitSamplesDetectedMedianHighestLimit
Fluoride
1981 to 2022
1947%02.054 mg/L
EPA limit
Nitrate
1982 to 2022
1782%0.7493.9610 mg/L
EPA limit
Lead
1981 to 2022
1457%05.9315 ug/L
EPA limit
Arsenic
1982 to 2022
1346%0610 ug/L
EPA limit
Uranium
1999 to 2022
1250%0.1021.7630 ug/L
EPA limit
Copper
1999 to 2022
1225%00.0061.3 mg/L
EPA limit
Radium (226 + 228)
1999
1090%005 pCi/L
EPA limit
Manganese
1981 to 2022
no limit2572%3.29488300 ug/L
health guideline
Sodium
1981 to 2022
no limit19100%3.1167.620 mg/L
health guideline
Chloride
1981 to 2022
no limit19100%3.658.98250 mg/L
nuisance level
Iron
1981 to 2022
no limit1947%048.4300 ug/L
nuisance level

Sampled fewer than 10 times, too few to summarize: PFOS (3), E. coli (7), PFOA (3), Radon (6).

Closer than the county

See the sampled wells near your address

The same records, drawn around one point: which wells within a few miles were sampled and what they found, how deep the wells next to you were drilled, and any leaking tank or cleanup site within a mile.

Check my address

What this means

Among contaminants with a federal limit, no tested sample in Lawrence County came back above it. That is reassuring, but sampling is uneven: wells that were never tested are not in this data.

Manganese and Chloride are widespread in local groundwater. They are mainly a staining and taste problem, but high manganese also carries a health advisory for infants.

What to test for in Lawrence County

  1. 1
    Coliform bacteria
    Recommended for every private well, every year.
  2. 2
    Radon
    Median local reading is 370 pCi/L.
  3. 3
    Nitrate
    Recommended for every private well, especially near farms or septic systems.
  4. 4
    PFOS
    Above the limit in 1 of 3 local samples; too few to quote a rate.
  5. 5
    Chloride
    Detected in 100% of local samples.
  6. 6
    Manganese
    Detected in 72% of local samples.

Test your Lawrence County well for coliform bacteria, radon and nitrate

Certified lab analysis of your own tap water, bottles and prepaid return shipping included. The Essential well panel covers arsenic, uranium, nitrate, lead, copper, manganese, iron, sodium and bacteria; radon and PFAS are add-ons.

Order the Tap Score well water test kit, from $209Already tested? Upload the report

Just want bacteria checked first? Tap Score coliform and E. coli test, $99. Coliform and E. coli are the tests every well needs every year.

Want a quick look before paying for a lab? Home well water test strips on Amazon check hardness, iron, pH and nitrate in minutes. They are a screen, not a result: arsenic, bacteria, uranium and PFAS need a certified lab.

Affiliate links: the merchant pays us a commission and the price is the same for you. It does not change what the data above says. As an Amazon Associate we earn from qualifying purchases.

Where to get a well tested in Alabama: certified labs, state programs and prices.

Already have results back? Get your lab report read against the Lawrence County numbers, $29. Every line explained, ranked by what matters, with the fix for each.

The rock under Lawrence County

Mississippian aquifers

Sandstone and carbonate-rock. Layered sandstone and limestone means a well may draw from either. Hardness and iron are routine, and the limestone layers can carry bacteria and nitrate from the surface quickly, so test for both yearly.

Classification from the USGS Principal Aquifers of the United States (national map, 2003 edition, GIS release 2015), read at the county centroid. A single well can sit in a different unit, especially near a boundary.

Official help in Alabama

Two places to start that are not selling anything: the state program that answers private well questions, and its list of labs certified to run drinking water tests. A certified lab is the difference between a result you can act on and a number.

Treatment that fits the local profile

Manganese

Oxidizing filter (greensand, birm) whole-house; Water softener (low levels); Point-of-use reverse osmosis

Systems we would look at first

Some links below are affiliate links. If you buy through one, the merchant pays us a commission at no extra cost to you. It does not change which products we list or what the data says.

For manganese

Iron and manganese oxidizing filter

whole-house, at the point of entry, about $1,800

Air-injection or greensand media; fixes staining at the source.

Free, no obligation

Get on the list for a free in-home water test in Lawrence County

No water treatment company serves Lawrence County through Well Water Nerd yet. We are signing licensed companies on county by county: they test at your tap for free, walk you through the numbers, and quote treatment only if something needs fixing. Leave your details and you are first in line. Nothing is shared until a company joins for Lawrence County, and you get an email naming it first.

What are you worried about?

The test is free and there is no obligation. No company is named yet; your details stay with us until one joins for your area, and we log the time and address of this request.

Common questions

Is there arsenic in well water in Lawrence County?

Arsenic was detected in 46% of 13 public well samples in Lawrence County, and 0% were above the EPA limit of 10 ug/L. Arsenic has no taste or smell; a lab test is the only way to know your level.

How often should I test a private well in Lawrence County?

Test for bacteria and nitrate every year. Test once for arsenic, uranium, radon, fluoride, manganese and PFAS, then again every three to five years or after any change in taste, color, or plumbing.

Counties near Lawrence County

Closest first. Groundwater does not stop at a line on a map, so the next county over is a fair second opinion.

Want the numbers themselves? Download the Alabama dataset as CSV, every county and town, with the sources named.

Sources

  • USGS Water Quality Portal: 198 samples in Lawrence County. Data from the Water Quality Portal, a service of USGS, EPA and USDA; groundwater samples collected by USGS and cooperators. Retrieved September 3, 2026.
  • USGS national arsenic model (Ayotte 2017): estimated share of 5,486 people on private wells in Lawrence County above 10 ug/L of arsenic, from geology, well depth and land use. County estimates of domestic well users with arsenic above 10 ug/L from the USGS national logistic regression model (Ayotte, Medalie and Qi, 2017), with private well population from the USGS 2015 county water-use compilation (Dieter and others, 2018). Retrieved September 15, 2026.

Non-detects count as samples and are treated as zero when computing medians. Exactly at the limit counts as not above it. A sample belongs to the town containing the well's reported coordinates.